A: Brandon - Our panels have very little give to slope, if any it would only be about 2".
by|May 4, 2023
Q:I want to use wooden posts inside these vinyl posts for extra support. What size wooden posts will fit so that the vinyl panel will slide into the routed vinyl post without issue?
by|May 30, 2017
1 Answer
Answer This Question
A: Please use a 4 in x 4 in-8 ft wood post.
by|Apr 5, 2020
2 found this answer helpful
Q:What is the distance between the routed holes?
by|May 16, 2017
1 Answer
Answer This Question
A: The distance between routed holes is not available.
by|May 23, 2020
Q:If I prop the middle of the section that not sag will this prevent the top from sagging?
by|May 2, 2016
1 Answer
Answer This Question
A: There is no need to add a support block to the bottom rail of a fence as the Veranda Pro Series fence panels are designed not to sag.
by|May 3, 2023
Q:Would this post still be ok or is there another solution I could use to make sure frost doesn't heave my post out of the ground?
by|Jul 31, 2015
2 Answers
Answer This Question
A: If your frost line is below 24 inches then pour the concrete below the frost line. The post only needs to be in the concrete 24 inches.
by|Jan 30, 2024
A: If the frost line is located below 24 inches we recommend using a 4x4 treated post to provide the extra depth needed.
by|May 3, 2023
1 found this answer helpful
Q:does the vinyl posts require an inter woden post ?
by|Apr 23, 2015
1 Answer
Answer This Question
A: No, our posts have been designed as a structural post and do not require wood post inserts. If needed, wood post inserts could be used at the corner and end of your fence run to provide additional strength.