Questions and Answers for Worx 2.5 Amp Oscillating Tool

A:  I've cut through copper pipe quite easily with the included blade.

A:  The sanding pads for the WORX WX665L Oscillating Tool can be found on the WORX website under model number WA5701.

A:  Also be aware that if what you're cutting is loose/free to move, it'll just oscillate in step with the blade, which pretty much negates any cutting action!

A:  The WORX oscillating tool is designed to cut swiftly and efficiently every time. There are several reasons that it may not be cutting. The first is that the tool is not turning on after plugging it into an outlet. If this is the case, please contact our Solution Center Team at 866-354-9679 for further assistance. If the blade is not cutting anything, then the blade may be dull if the teeth look used. You will be able to fit any universal oscillating tool blade on the WORX oscillating tool, and you may find these blades on the Home Depot website. Finally, you will need to make sure the blade is fastened and secured by using the supplied Allen key to tighten the blade firmly on the shaft.

A:  Thank you for sharing your experience and review! We greatly appreciate your honest feedback as it gives us a better understanding of where we need to improve. We apologize for any inconveniences you have been caused. We'd like to learn more about the specific issue that you are experiencing so that we can provide you with a solution. Please email us at jasmine.dimanche@positecgroup.com to advise us of your specific issue and we'd be more than happy to help you. Thank you for choosing WORX!

A:  Thank you for your question! The answer will be yes . You will be able to cut boards 3/8 to 1/2 of an inch . Thank you for choosing WORX!

A:  Thank you for your question. The WORX Oscillating Tool will cut through adhesive back splash and some metals. We do not recommend the Oscillating Tool for use with rock and masonry.

A:  Yes, this tool can be used to cut through metal or stone.

A:  This model comes with a wood blade. You would need a different blade for your application.

A:  Thank you for your question. Included with the WORX 2.5 Amp Oscillating tool is (1) 1-3/8" Standard Wood Eng Cut Blade.

A:  I wouldn't try to use it for going through 2 x 4's

A:  Yes, you can cut through a door jamb with this tool.

A:  I have not

A:  Thank you for your question. Please contact our Customer Care Team at 866-354-9679 Monday through Friday from 9 am until 6 pm EST and on Saturday from 8 am until 4 pm EST. We'd be more than happy to assist you. Thank you for choosing Worx!