Questions and Answers for ZEP 32 fl. oz. Grout Cleaner and Brightener

A:  Well if you have grout that needs cleaning, then I would guess you would need grout cleaner, I did not purchase this product.

A:  One bottle covers up to 250 square feet.

A:  No, Mike

A:  Yes, I have used it on this type.

A:  No, it is not advisable to use Zep Grout Cleaner & Brightener on shower walls as damage may occur. Try Zep Mold Stain & Mildew Stain Remover- a powerful cleaner and stain remover, formulated to” remove” tough mold and mildew stains on contact. Use on most bathroom surfaces, including, shower grout & tile, fiberglass, and porcelain. I hope this helps!

A:  Thank you for your inquiry. Zep Grout Cleaner & Brightener is specially formulated to clean floor grout only. Avoid use on tile and other sensitive surfaces as damage may occur. Try Zep Foaming Tub & Tile Cleaner- when used as directed, Zep Foaming Tub & Tile Cleaner quickly dissolves dirt, soap scum, calcium, and rust on acrylic, fiberglass, tile, and porcelain.

A:  I would just wait one day so you know the product is completely dry.

A:  Thank you for your inquiry. It is advisable to avoid the use on sensitive floor surfaces such as marble, granite, travertine, and "slate."

A:  Wipe and rinse quickly to prevent grout residue from redepositing on tile. A second application may be necessary to remove stubborn stains. It is advisable to reseal grout after cleaning to prevent contamination.

A:  Note: Before working with the product, wear chemical resistant gloves, safety goggles and long pants and a long sleeve shirt. We also suggest using painter's tape to protect baseboards and other sensitive surfaces. by | Jun 11, 2023

A:  To clean like a pro and achieve best results, apply Zep Grout Cleaner & Brightener to grout lines with a cotton swab, grout brush or toothbrush. Allow cleaner to work for 3 minutes, then scrub to remove embedded dirt and stains.

A:  This is not for whole floor use. Damage may result from use other than the instructions on the bottle. This product is for direct use on only the grout between the tiles.

A:  Great question. To clean like a pro and achieve best results, apply Zep Grout Cleaner & Brightener to grout lines with a cotton swab, grout brush or toothbrush. Allow cleaner to work for 3 minutes, then scrub to remove embedded dirt and stains. Wipe and rinse quickly to prevent grout residue from redepositing on tile. A second application may be necessary to remove stubborn stains. It is advisable to reseal grout after cleaning to prevent contamination. Note: Before working with the product, wear chemical resistant gloves, safety goggles and long pants and a long sleeve shirt. We also suggest using painter's tape to protect baseboards and other sensitive surfaces.