Customer Reviews for Dremel 1/8 in. Rotary Tool Multi-Purpose Cutting Bit for Wood, Plastic, Fiberglass, Drywall, Aluminum, and Vinyl Siding

I used this bit to cut holes into my Home Depot 5gal buckets for an aquaponic system that I am setting up. It cut though the material like a hot knife through butter, and I could not be happier with the results.

I used 2 of these brand new bits to try and cut through 3/4" (1/2"+1/4") of old drywal a 12"x12" square holel. I set my Dremel to 15k RPM. One bit snapped off after the first 12" and the other bit it are the bit down to half its thickness. There were no nails or anything I was hitting either.

Needed to cut through a part made of pot metal. I had very little room to work and this cutter performed top notch.

Works as expected on drywall.

Good product. Cuts through 1/4” aluminum without any problems.

This works magic with plastic I was able to cut out 8” and 3.5” holes in some door panels with ease I will be buying the entire stock of these little guys

Used once, to widen a door latch jamb. Worked great.

Cuts, easy to control and cheep

Performs as expected.

the tool is too long for what I wanted to do,and would wobble at the outer end. I will try to cut it down and see if that helps.

Worked as advertised

Breaks under moderate pressure

Excellent product. I Have used many of these and never disappointed.

Works well but dulls quickly. I was making photo boards for vacation bible school and it took 3 of these to cut out 3 faces in the photo boards. They would get extremely hot and stop cutting through the thin hardboard.

This did exactly what I bought it for and saved me a lot of time.

Perfect for cutting drywall holes

It was not good and cutting would damage my drywall more than was worth it. I read this below poor