Customer Reviews for Milwaukee SHOCKWAVE 3/8 in. Drive Deep Well 6 Point Impact Socket Set (12-Piece)

This set is a nice pick up for the price that I paid for. I haven’t got a chance to test the sockets yet. I did get a paper cut for touching the edge of the paper cardboard that wraps around the plastic hard case. Be careful!

I received this as a Father's Day present! Customer service went out of their way to make sure this was delivered on time and took extra effort in helping my mother (as she bought it). They were very patient and delivered world class customer service. Upon receiving it, I adjusted our side fence gate. The sockets gripped tightly with zero slippage! I broke my last set - the quality of these is much higher! 5* recommendation

Perfect set for daily use. Sockets do come soaked in oil

Says it comes with a15/16 short and deep wall but it doesn’t. Only goes up to 3/4. They have a misprint it’s supposed to be 5/16 not 15/16. Still a good price if u get it on sale.

For the price, these are excellent sockets, build is good, quality is great. If you’re older and have trouble seeing, the painted stamped sizing is great on the eyes, especially working in low light conditions. I have both 3/8 and 1/4 metric sets and have enjoyed using them. Side note those magnetic style socket holders where the sockets insert a drilled hole, these won’t fit, they are a bit thicker

While working on our race car, it occurred to me just how lacking my tool collection was in 6-pointed sockets. A 12-point one just wanted to strip the bolt head when you applied enough pressure to turn the crank. I wanted some strong ones. I wanted them to be easily identified as to size. I wanted most sizes that would be the ones you'd use a 3/8 drive for. I wanted SAE and Metric. This is it!

They’re incredible. I use them all the time and the deep sockets are great for all-thread. I had to do an annoying job and use 2 of them in wet fire-caulking and they got fire caulk all over them. Most of it came off but now so many of my toolls are kinda nasty sad.

This socket set is a beast. Each one is a good weight in hand and altogether hold up well. I had the case sitting on the front seat in my truck and the vehicle thought a passenger was present and not wearing a seatbelt! Attaching and detaching the sockets from an impact driver is quick and painless. Besides the well molded inner well to allow for a deep reach, the best feature is the stamped labeling that will hold up to wear so you can always tell what size each one is.

Nice rail for the sockets. Large numbers to see what size you need. 6 point is great for old rusty bolts. I just got done with my son's car, new struts, new backing plate, rotors and pads. I had to pull the rear hubs. The sockets worked great and didn't slip on any of of the hex heads. That made a difference in a job of not becoming a nightmare because of rounded heads on bolts.

This metric set of Milwaukee impact sockets is half inch drive and six point contact with a deep well. For those using a pin detent style impact wrench, these sockets have two holes to simplify attachment. One of the features of this set is the large stamped markings for socket size and the bright white ink used to fill the markings. The sockets are manufactured from forged high torque impact steel for durability and they include a non-slip hex geometry to reduce damage to the socket and rounding of the fastener. The sockets come in a blow mold style case that has a space for each socket that is labeled with the corresponding socket size. Not only does this make it easy to put sockets back in the correct locations but it also makes it easier to identify a socket to select if they have turned and the socket markings are not visible. The case is designed to nest when stacked which will help with storage. In my testing, the sockets held well on an impact wrench with friction ring connection. They also fit well on fasteners with no slipping or rounding of the fastener. Overall this is a great product that I absolutely recommend. My only thoughts or concerns which are minor and do not detract from the value of the product: 1) Once the retail wrap is removed, one has no way to differentiate between different cases of impact sockets from the outside (i.e.: metric vs. standard) as the blow mold case does not have any part numbers, words, etc. on it other than the Milwaukee logo (note: inside there is a sticker identifying each socket size and its corresponding individual part number); 2) Some of the red ink/paint drizzled or dripped onto other areas of the sockets during manufacturing. Socket sizes included in this set: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, 27

SUMMARY: A GOOD LARGER DEEP WELL SOCKET SET FOR THE MONEY BACKGROUND: I got a smaller Milwaukee Model 49-66-7021 deep well socket set a short time ago, but it didn’t have several sizes I use. The chance to evaluate the larger 49-66-7008 set was too good to pass up. FIT AND FINISH: Same sturdy construction of my other Milwaukee socket sets. FEATURES: From the Home Depot page, with my comments as appropriate. • Kit includes 14 deep metric sockets, the following sizes are included: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21mm. o My first set did not include the 11, 12, 16, 18, and 20mm sockets. This does include all but the 20mm, which I have in other sets. • Boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables users to select the right socket every time throughout the life of the socket. o The markings are easy to see when new. Time will tell if dirt and grease makes it difficult. Size is only marked on one side. It would be nice if the size was marked around each socket. • Laser etched part numbers. o Handy if I ever need to replace one. • Engineered with high strength forged steel for optimized performance in heavy-duty applications. o I contacted Milwaukee technical support and asked: “What alloy is used for your impact rated sockets?” They replied: “this would be considered proprietary information, so not appropriate to share.” I find that a disappointing answer as I have been able to get alloy composition from other manufacturers in the past. • Non-slip hex geometry to prevent socket and fastener rounding. o The radius relieved corners seem to be a common construction configuration now. o I did a test of the non-slip feature (see photos) and found that the socket will deform (crease) a lower grade nut to such an extent that a standard socket will be slightly difficult to use. But it didn’t round it over. I believe this is because the radius relieved corners appear to be simple circular sections, leaving an edge between the flats and the reliefs. I seem to recall in years past that at least one other manufacturer had a slight blending between the two surfaces to avoid concentrating the force along an edge. The socket did not appear to suffer any damage. • Dual-hole design and ring groove allow for easy socket attachment and removal. o The dual-hole design is slightly harder to remove than the internal recesses in some of my other sockets. But I’d rather have them a little harder to remove than too easy. • Customizable Socket Rail comes with removeable end caps to add or take off socket clips for optimal storage. o You can do it, but there isn’t room to add any sockets to the rail. • Backed by a Lifetime Guarantee. • Meets ASME industry standards. o There are tons of standards, but Milwaukee doesn’t say which ones on the package or the product information page. SUMMARY: Worth the money to complete my metric deep well socket collection. PROS: Heavy duty. Easy to use CONS: Not marked with the size on all sides. Non-slip design can deform softer grade nuts and bolts

SUMMARY: A NICE MEDIUM-SIZED IMPACT SOCKET SET BACKGROUND: I wanted a deep well impact socket set, and the Milwaukee 49-66-7022 looked like it would do the job. FIT AND FINISH: My first socket set from Milwaukee. Very heavy duty, with a nice solid feel. FEATURES: From the Home Depot page, with my comments as appropriate. • Boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables users to select the right socket every time throughout the life of the socket. o Very visible, but only marked on one side. • Laser etched part number. o Handy if you need to know. • Engineered with high strength forged steel for optimized performance in heavy-duty applications. • Non-slip hex geometry prevents socket and fastener rounding. o The radius relieved corners seem to be a common construction configuration now. • Dual-hole design and ring groove allow for easy socket attachment and removal. o The dual-hole design is actually slightly harder to remove than the internal recesses in some of my other sockets. But I’d rather have them a little harder to remove than too easy. • Customizable Socket Rail comes with interchangeable clips and removeable end caps to add or take off socket clips for optimal storage. o You can do it, but there isn’t room to add any sockets to the rail. • Lifetime Guarantee covers impact sockets and extensions only. • Meets ASME industry standards. • Kit includes 9 Deep SAE Sockets. The following sizes are included: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1. o These sizes cover 95% of my deep impact requirements. • Optimized for use with 1/2" drive impact wrenches, drivers, ratchets, and adapters. OPERATION: The sockets slip on and off my ratchets with minimal effort. I ran a nut on a piece of all-thread until I split the 4x4 test piece with no problems. I also tried it removing wheel lug nuts with no issues. SUMMARY: A good deal for the money and a welcome addition to my socket collection.

This impact socket set came in very well packaged and very well protected. It has helped my husband take his motor apart to repair the motor and put it back together with ease. He said they were great to work with and he said they were all sturdy and very well balanced in his hands. He said they will be of great help in his hobby of re-building his old truck and the motor.

Milwaukee yet again has another winner! This socket set is perfect for my needs. At work I'm constantly on the go from building to building. I needed some deep impact sockets for those tough jobs for heavy use for my impact drill. I love that everything is in one case that's easy to carry. Everything is labeled and easy to read. sockets are laser printed and the number stands out so that its easy to locate what you need. The best part is that these are built to last and built to take a beating which is exactly what I need. Overall, you get the best and you know that they will last.

Milwaukee SHOCKWAVE 1/2 in. Drive SAE Deep Well Impact Socket Set (12-Piece) review: Well, here is another shining example of an excellent Milwaukee product! First, the socket set is contained in a strong case - excellent! Each socket has its size both indented and colored white on black - yeah! They are heavy and durable and built to last. I like using them on my small Milwaukee stubby impact wrench. Of course they work well on the big boy impact wrenches! Built tough, easy to see the size, and all stored in an easy and durable case. Milwaukee rocks! Love it! There ya go!

A very nice set of 1/4" metric impact sockets. They come on a nice handy rail to help keep them organized in your box. I really like how the sizes are clearly marked and how the white really stands out against the black of the socket. I've used them just a couple of times so far and haven't had any problems, they have a good hold on the impact but are still easy enough to remove/ switch out.

This SAE set of Milwaukee impact sockets is half inch drive and six point contact with a deep well. For those using a pin detent style impact wrench, these sockets have two holes to simplify attachment. One of the features of this set is the large stamped markings for socket size and the bright white ink used to fill the markings. The sockets are manufactured from forged high torque impact steel for durability and they include a non-slip hex geometry to reduce damage to the socket and rounding of the fastener. The sockets come in a blow mold style case that has a space for each socket that is labeled with the corresponding socket size. Not only does this make it easy to put sockets back in the correct locations but it also makes it easier to identify a socket to select if they have turned and the socket markings are not visible. The case is designed to nest when stacked which will help with storage. In my testing, the sockets held well on an impact wrench with friction ring connection. They also fit well on fasteners with no slipping or rounding of the fastener. Overall this is a great product that I absolutely recommend. My only thoughts or concerns which are minor and do not detract from the value of the product: 1) Once the retail wrap is removed, one has no way to differentiate between different cases of impact sockets from the outside (i.e.: metric vs. standard) as the blow mold case does not have any part numbers, words, etc. on it other than the Milwaukee logo (note: inside there is a sticker identifying each socket size and its corresponding individual part number); 2) Some of the red ink/paint drizzled or dripped onto other areas of the sockets during manufacturing. Socket sizes included in this set: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16

The socket set has what you need for all the tough jobs that they're needed for. I got these to have as a precautionary measure for changing out tires during a roadside emergency. I have the 1/2 inch Milwaukee Impact Wrench and needed these to complete my goal of having a quick go to for changing out tires. The added bonus for me is that these sockets can be used for many other mechanical tasks that may arise. I enjoy that they come in a quick grab and go case. Perfect for storing in the trunk of a car or in any garage or took cabinet. These are made of quality steel and are laser etched for easy distinction. These are going to last me a lifetime and are definitely adding a little peace of mind to my travels. SIMPLE! QUICK! NO BRAINER! RECOMMENDED!

I am really enjoying my new Milwaukee Shockwave Sockets. I like the bright white sizes engraved on each one. These deepwell sockets also have two holes in them so they stay on the impact gun or ratchet without slipping off. The hard plastic waterproof case is great for storage. The set includes all the basic sizes that you will need. I often have the need for sockets that are strong forged steel and can withstand the torque of an impact gun. We use them for building decks and outdoor sheds, driving bolts into concrete.Definitely recommend these Shockwave sockets.

What a great impact socket set. Comes in 12 piece with carrying molded case. Sockets sizes from 3/8":through 1 1/16" sizes. The individual sockets have the sizes imbedded into the socket and then have been painted white in the imbed sizes. The sockets are designed in 1/2" drive for use with impact drills and are manufactured in the 6 point deep socket, "NON-SLIP HEX GEOMETRY" style. These are a very heavy duty socket that will take a lot of abuse during it's lifetime.

Most of my work I typically use standard "thin" wall sockets even for impact or high torque. Now that I use powered drivers more than hand ratchets I felt it time to move to the appropriate socket for powered driver/impact applications. I went with the Milwaukee 3/8" SHOCKWAVE set because of the engraved, white stenciled markings on the socket wall. Each socket size is easily identified thanks to the bold marking. I also like the included case to keep this set together in. The real bonus is the socket collection in this set; 12 pieces of the most common socket size most folks use 5/16" through 1" in 1/16" increments! The deep socket design is perfect for the longer fastener work and the 6 point socket well leaves less chance of rounding out the bolt/fastener in high torque application.

Milwaukee 14 Piece 3/8 Inch Metric Drive Deep Well Impact Socket Set The Milwaukee 14 piece 3/8 inch drive metric socket set has everything you could want in a set. This socket set meets my requirements by having both permanent embossed size markings, and then Milwaukee included painting those markings, enhancing those markings so you can easily identify the socket you need. Being 6-point sockets you will not have to worry about rounding out the fasteners, as long as you seat the socket. The black oxide coating easily identifies these as impact capable sockets. The black oxide coating also cuts the chances of the sockets rusting before your next use. Milwaukee has made it easier to store these sockets where they are easier to locate, by including a socket rail to keep your sockets in order and easier to store together. With all of the boxes checked this set should fit your needs.

These sockets from Milwaukee are ¾” drive heavy duty deep impact sockets. This particular set is an 8 piece Metric 6 point set. The set consist of 26mm, 27mm, 29mm, 30mm, 32mm, 35mm, 36mm and a 38mm size socket. The sockets come packaged in a nice blow molded storage case. Unique feature of these sockets are the size markings. They have deep stamped size markings that are white ink filled for exceptional visibility. Socket markings and depth of bolt/nut clearances are superior compared to Snap On as shown in the photos. Sockets come with a lifetime guarantee.

Milwaukee 9 Piece ½ Inch Drive Deep Well Impact Socket Set The Milwaukee 9 piece ½ drive SAE piece socket set has everything you could want in a set. This socket set meets my requirements by both permanent embossed size markings, and then Milwaukee included painting those markings enhancing those markings, you can easily identify the socket you need. Being 6-point sockets you will not have to worry about rounding out the fasteners as long as you seat the socket. The black oxide coating easily identifies these as impact capable sockets. The black oxide coating also cuts the chances of the sockets rusting before your next use. Milwaukee has made it easier to store these sockets where they are easier to locate, by including a socket rail to keep your sockets in order and easier to store together. With all of the boxes checked this set should fit your needs.

I have to say one thing about these SAE deep well sockets The sizes are so easy to read even in dim light. They even come with a rack to keep your sockets on which helps to keep them organized. These sockets even come with a lifetime warranty. My favorite thing about these sockets is that after years working with sockets with the sizes etch on them and now I have a set where the sizes is in white and so easy to read and I have used them numerous of times and so far have not wore the sizes off. Where I build decks and wooden fences I use a impact drill to drive in lag bolts and these sockets are really holding up very good.. This is a great set to have in your tool box and I have to highly recommend the set.

When you use these sockets, one thing comes to mind... quality. Each socket is is supremely solid and it feels like it would last a lifetime. The sockets are coated in a black finish which feels like it would be anti-scratch protective. The set of eight oversized sockets are for large jobs and they are designed to take a beating. The drive size is larger than normal, so you will need a driver to be able to handle these large sockets.

14 piece Impact Duty 1/2” drive Metric 6 point deep socket set with case. Sizes from 10 to 22 in 1 mm increments skipping 20 mm plus size 26 & 27. These sockets are high strength forged steel and have a lifetime warranty. 6 point sockets fit hex heads/nuts like a glove – not much danger of rounding corners. Each socket has it’s size stamped on the side filled with white ink for easy visibility. The retaining ring groove is painted bright red with two holes for the pin. All sockets are about 3-1/16 long, the depth of the sockets vary from 7/8” for the 10mm socket to 1-3/4” for the 27mm socket. These are housed in a sturdy blow molded case – these cases are stackable – 11” wide x 11-1/8” tall x 2-15/16” thick.

A very nice set of impact sockets from Milwaukee. Here are the basics you need to know about this set you are getting 20 deep sockets and 20 standard sockets. Both the deep and standard sockets have the 6 points to help prevent slippage. The set is both metric and SAE. SAE you are getting standard and deep sockets in the sizes of 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4. The metric for both deep and standard sockets is 8 through 19mm. The set also comes with 3/8” socket adapter, 3” impact extension, and a universal joint socket. The set also comes with Milwaukee’s lifetime guarantee. The set also comes with a nice carrying case that holds the sockets enough that they won’t move around in transport but are easy to remove when ready to use. The one thing I wish Milwaukee had done with the case was make the socket tray removable. The Milwaukee storage case does have a nice latch locking system that is easy to open but still holds the case close. The nice thing about the sockets are they stamped and white inked filled so you can really see the size. Also the sockets have a red rim so you can clearly tell which side goes on your anvil. The sockets go on easy on both friction ring and detent pin tools. I enjoyed using the sockets on my M12 Stubby Wrench, my non impact racket, and my M12 Surge. The sockets held up well on all 3 tools and were very easy to use and change. I never had an issue with the sockets slipping or getting stuck on the bolts. Overall I would recommend this set of sockets. The set is high quality plus it is backed by Milwaukee’s lifetime guarantee.

The Milwaukee Shockwave 1/4 inch-drive, deep-well, 6 point, impact duty socket set is a well-designed tool set. This set includes 14 Metric sockets ranging from 4mm up to 15mm that are finished in the typical black-phosphate and the size markings are white and very bold. They are very easy to see. The deep-well design allows use on longer fasteners while the 6 point feature grips the nut more securely than 12 point sockets. This prevents you from rounding off the nuts when using an impact driver. Even though these sockets are impact rated they work just as well with any other 1/4 inch-drive tools. They come with a nice metal/plastic storage rail that can be screwed into/onto any flat surface. This set has a lifetime guarantee against breakage. This is an excellent socket set and Milwaukee does make these sets in SAE and other drive sizes. It will make a nice addition to your tool box.