Customer Reviews for SPRAYIT LVLP Gravity Feed Spray Gun Kit

Used it for a cost effective solution for some small projects. Painting cabinets and also using a fine spray coating. Product worked great with no leaks and no dripping.

Solid spray gun. Good flow

Nice spray gun for the price,have not sprayed paint but did run liquid through it and it atomized just fine

Nice for the money. Glad I had more filters and line couplers already as well as a line dryer (previously purchased from home depot). The regulator was also very nice though a second one would have been handy.

Perfect for small compressor

The Both guns in the Sprayit kit work amazingly well using the Dewalt 6 gal. Pancake air compressor. The larger 3300 will spray one side of an interior door without needing to stop for compressor recovery. Atomization is good using a high quality acrylic latex paint reduced with about 8 to 10%.

Very good Quality guns.

Rating provided by a verified purchaser

Took a fair bit of adjustment to get the settings dialed in but once I did it laid down a very nice finish. I did notice the trigger seems to have double pull and that may be part of the difficulty getting the settings right. I think the best part was how little material this gun used.

Worked really well laying on Varathane water based urethane on a cornhole game set. Puts on plenty of material using only a small portable pancake style compressor. Never had to wait for the compressor to catch up. The spray pressure stayed constant all the time, even when continually spraying. Adjustability of the gun worked flawlessly to dial-in a smooth finish with minimal overspray and no runs. I used the large gun with the 1.7 tip and the final finish turned out very smooth. I consider it a great value for the money and it works way, way, way better than a HVLP spray gun with my small compressor. The HVLP gun ran out of air within 10 seconds of spraying and I had to wait for the compressor to fill up for 30 seconds before continuing. This happened the whole time. The job took hours longer because of that problem and it nearly ruined the large door I was finishing. I will never use anything else but this LVLP gun from now on.

I used the smaller touch up gun to spray Emtech 6000 water based paint on a guitar. Water based paint can be a challenge since it is more viscous than thinned lacquer and will not atomize as well. This gun gave a smoother spray than numerous other spray guns I have.

Works great iuss a 6gallon compressor its a small compressor i have to stop at times to get the air built up but thats cause i have a small compressor, otbertban that the gun work great. And the tip of the gun is to hard to remove even with the wrenches so i just clean the guns with them on.

Spray gun worked wonderfully for what I needed it for, which was spraying a car door panel.

The tool is of good quality and worked well with my porter cable pancake compressor!

Good quality

It was my first time using lvlp gun used to spray over already painted cabinets .i sprayed water based polyurethane it worked just perfect.im not a handy man I’m a painter I spray a lot of staircases it seems it’s gonna work really good on my laquer works ( balusters hand rails etc )I’m very happy

I purchased this set mostly because it had a good selection of spray tips and thought I could use it to spray latex paint. After a few attempts I found it would not spray latex very well even using additives. It is very hard to clean and just spraying water though it doesn't work so you have to remove the tips to really get it clean. Overall I am extremely disappointed in part of the set I have used.

Parts were missing and there were wrong parts in the kit.

Rating provided by a verified purchaser

Now I can spray stains and polyurethanes without having overspray or uneven finish because I pressed too hard with the rag.

Great quality with amazing results! Works well with smaller compressors!

Excellent quality for the price.HVLP results with lower CFM requirements, and less overspray.A little bit of a learning curve.A little practice goes a long way.Best option if you’re using a lighter duty compressor.

I LOVE that this kit is so versatile. I can use it with my little Porter Cable 6 Gal 150 PSI compressor with no issues. It may be different if I was trying to paint a car in one go or something. But even if I was painting a car, it won't be all at once, so I'm not very concerned. You also get a lot with this kit. The large gun uses both of the included needles/nozzles, while the small gun only uses the one inside it (for any interested party hoping for multiple sizes with the small gun). There's minuscule wasted paint. I appreciate the inclusion of the regulator to install at the bottom of the gun. The only way I could think of to improve this kit would be to have regulators for both guns, or even better, regulators with dessicant air filters. Hardly an issue though, they cost about $5 each, so for $15, that can all be added after. I've also seen some special HVLP paint cups that pressurize the paint which looks convenient, but I can't tell if they're compatible. I'll still be giving it a shot though. All in all though, if I had to do it all over, I wouldn't hesitate to buy this kit again.

Use this only once so far. My first air sprayer so little to compare it to. The quality of the finish product was good and I had no problems. I used the largest nozzle as I was spraying latex paint (thinned and with Floetrol). Loved the included regulator and the multiple nozzle sizes. Documentation is not great and still unsure if the needles are supposed to be matched to the specific nozzles. No markings on them. I took apart all pieces (6 places to unscrew) when cleaning but I don't think this was necessary and possibly not recommended in at least one case where there was thread seal which made it near impossible to take apart. Again, better documentation could have helped. Need to be careful when removing the needle as there are many little washers, seals, etc. and the exploded view provided is not great. I bought this because I have a small air compressor and only small projects. On paper the air compressor should have been able to keep up but the sprayer consumed more gpm than the rating on the compressor at the lower pressure so eventually needed to pause between passes. A proper case (vs whimpy plastic tray) would be better.

Great sprayer kit. Has done just what I needed it to do. Sprayed interior doors and door jambs with latex semi-gloss paint. Once you have played with it a bit and learn how to keep it clean, it did a fantastic job.

The guns are well made, atomize product well and are a very good value. I purchased them several weeks ago and have used them to refinish our kitchen cabinet doors and drawer fronts (in process) with a tinted water borne finish. I have also used them to apply water borne clear coat finish to my wood turnings. They work well at 30-40 psi at the gun.

This is the second gun I ordered. The first one I use once to paint a car panel. The air adjuster nob broke the 2nd time when I go to use it. The second gun I order something was wrong with the adjustment and I had to return it back. I would order another one because I like the feel of it and I find it painted the panel good. Just hope that nothing is wrong with it this time. Thank You Steve

It's obviously not one of the high end paint guns, but you aren't paying the price of a high end paint gun. The machining on the threads is rough, actually cut my finger on a sharp edge. the large gun had been dropped during the manufacturing process, and that left a couple of gouges in the sealing area for the tip. I did have to do some work to get all the seals to work correctly. I have no idea what the wrenches are for, they don't fit any of the gun tips. The engineering though is solid, I've been getting good coverage and a balanced spray pattern from the full size gun. Overall decent price for the quality. Defiantly not a daily use gun, but for what I'm doing they work nicely.

Excellent product, I have several other top of the lines spray guns to spray cars but you need a at least 80 gallons air compressor to use them. These works very well with smaller tank like 10 gallons 2 horsepower air compressor. Great for do it yourself jobs

Small one is fine but the larger one leaks bad the paint drips out of the neddle