RYOBI presents the RYOBI Biscuit Joiner Kit. This biscuit joiner cuts slots for holding biscuits with precision. It has the capability of cutting angles from 0 degree to 135 degree with positive stops at 0 degree , 45 degree , 90 degree and 135 degree . It features a carbide tipped blade, accurate metal fences with rack and pinion adjustment and an ergonomic handle for comfort during prolonged use. This tool has a powerful 6 Amp motor that delivers up to 11,000 RPM which provides power for working in the hardest woods. To learn more about RYOBI tools, go to RYOBItools.com and check out RYOBI Nation.
Powerful and precise with a 6 Amp motor and 11,000 RPM, the Makita Plate Joiner cuts through a variety of wood quickly. The rack-and-pinion vertical fence system is engineered for accurate fence adjustments and the cast aluminum pivot fence has three positive stops at 0°, 45° and 90°. Easy to use with a ergonomic design for comfort, blade changes are quick and easy for less downtime. The blade diameter is 4 in. with a maximum cutting depth of 0.75 in. and there are six depth settings with 1-touch stops for the most common biscuit sizes including #0, #10 and #20.
This DW682K Heavy-Duty Plate Joiner Kit is powered by a 6.5 Amp 10,000 RPM motor for working with hard woods. This plate joiner features a dual rack and pinion fence that ensures blade and fence are always parallel for accurate joints every time. The integral one-piece fence is adjustable allowing the user to tilt it from 0-90°. With this DEWALT plate joiner, you can also make flush cuts at 0° without needing to remove the fence. The non-marring, heavy-duty aluminum shoe allows the user to clamp the plate joiner for stationary work.
The Zeta P2 is the profile biscuit joiner for the P-System which may be used to join components in solid wood, plywood, mdf, particleboard, plastics, solid surface and more without the use of clamps. The integrated Vertical Mechanical Drive (VMD) on the cutting spindle of the Zeta P2 is the centerpiece of this profile biscuit joiner. During the cutting process, the VMD automatically performs a vertical movement to create the profile groove. All P-System fittings are then manually inserted into this groove, ensuring a fast, form-locking anchorage. The Zeta P2 can cut P-System grooves for connectors with varying installation depths simply by turning the P-System depth adjuster, thus removing the need to change cutters.