A: Hi, The John Guest 1/4 in. Push-To-Connect Polypropylene Tee is not suitable for pneumatic applications. We do make a tee that is suitable for pneumatic applications. The part number is (PI0216S). If you have any more questions you can call tech support at 877-700-4242. (Kind regards,)
A: This 1/4 in. Push-To-Connect Polypropylene Tee Fitting is rated to 150 psi at 70f and 60 psi at 140f. Please make sure to not exceed the pressures listed.
A: Yes, this fitting can be used with pex tubing that is ¼” outside diameter. Please verify actual dimensions with tubing manufacture.
A: Hi, The John Guest 1/4 in. Push-To-Connect Polypropylene Tee will work with PEX pipe. If you need help selecting the correct size PEX or questions about your application you can call tech support at 877-700-4242. (Kind regards,)
A: The 1/2 in. Push-To-Connect Polypropylene Tee Fitting can be used for in ground applications but it is recommended to wrap the fitting with silicone tape to prevent damage to the seals in the fitting. Failure to keep the fitting free of contamination can result in a shorter lifespan. Please consult with a local licensed plumber to verify code compliance.
A: John Guest model is for 1/2" CTS.
A: This 1/2 in. Push-To-Connect Polypropylene Tee Fitting will work with tubing that is 1/2” outer diameter. Please verify the OD of the tubing with the tubing manufacturer.
|Name||1/4 in. Push-To-Connect Polypropylene Tee Fitting||1/4 in. (3/8 in. O.D.) Push-to-Connect Brass Coupling Fitting||3/8 in. x 3/8 in. x 3/8 in. Compression x Compression Brass T-Fitting||1/2 in. Push-To-Connect Polypropylene Tee Fitting|
|Fitting 1 size||1/4"||1/4"||3/8"||1/2"|
|Fitting or Connector Type||Tee||Coupling||Tee||Tee|
|Connectivity||Push Fit||Push Fit||Compression||Push Fit|
|Application||Air||Potable Water||Potable Water||Air|
|Features||Corrosion Resistant, Lead Free, Removable||Removable||Lead Free||Corrosion Resistant, Lead Free, Removable|
|THD SO SKU||1000405233|
|View Product||View Product||View Product||View Product|