Best Seller
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Professional results that a DIYer can be proud of begins with 322 Multi-Purpose HVAC Foil Tape by Nashua. Specially designed for joining and seaming connections in flexible and sheet metal duct work where UL 181 listing is not required. Its extreme high tack, aggressive adhesive provides an instantaneous and durable bond to surfaces. Nashua Tape. Trusted by professionals. DIY approved. Count on Nashua to get the job done right.
Tape Length (yds.) | 50 |
|---|---|
Tape Width (in.) | 1.89 in |
Thickness (mm) | 0.0889 mm |
Color Family | Metallic |
|---|---|
Features | Peel Back Design |
Material | Aluminum |
Maximum application temperature (F) | 200 |
Maximum hold temperature (F) | 200 |
Minimum application temperature (F) | 40 |
Minimum hold temperature (F) | 40 |
Number of Rolls Included | 1 |
Pack Size | 1 |
Returnable | 90-Day |
Hi there! Yes, Nashua 322 can be used to attach, seam, seal, and patch foil/fiberglass insulation around HVAC ducts. However, we recommend referring to code compliance to verify UL 181 requirements if necessary, for this application.
HI there! Yes, Nashua 322 Multi-Purpose Foil Tape may be suitable for patching or covering small chew holes in HVAC ductwork. The tape is specifically designed for sealing ductwork in HVAC systems and is commonly used for duct sealing, insulation patching, and seaming applications. It features a conformable aluminum foil backing and a high-tack adhesive that provides strong adhesion. For best results, the damaged area should be clean, dry, and free of loose material before applying the tape. However, if the raccoon damage is extensive or the duct has large tears, crushed sections, or structural damage, the affected section of ductwork may need to be repaired or replaced rather than simply patched. Best of luck!
Hi there! Nashua 322 Multi-Purpose Foil Tape is designed and tested for HVAC applications such as sealing ductwork, insulation seaming, and patching. We do not test or recommend Nashua 322 for use in fireworks assembly, fuse securing, or other pyrotechnic applications. Best of luck!
Hi there! Thank you for your question. Nashua 322 Multi-Purpose HVAC Foil Tape is designed for sealing ductwork in HVAC systems and features a conformable foil backing with strong adhesion. It is commonly used for duct sealing, insulation seaming, patching, and general HVAC maintenance applications. While the tape is often used in applications where an air-tight seal is needed, the available product documentation does not specifically state that it is waterproof, so we cannot make that claim. Regarding silicone, we do a significant amount of testing on product performance, adhesion, and HVAC applications; however, we do not specifically test Nashua 322 for compatibility with silicone sealants applied underneath the tape or around its edges. Because of that, we cannot confirm how the tape will perform in combination with silicone. We would recommend testing the combination in a small area first to ensure proper adhesion and performance for your application
Hi there! Our 322 product will work for interior duct work and features low VOC content. We hope this helps!
This tape is not designed to stop radon. Mike
Hi there! This product is meant to be a permanent foil tape, so while you can remove it, it will likely leave some residue behind. For the easiest removal, peel it back slowly, and in addition to a mild adhesive remover, to clean up any adhesive that may be left behind. Best of luck!
Hi there! This product is meant to be a permanent foil tape, so while you can remove it, it will likely leave some residue behind. For the easiest removal, peel it back slowly, and in addition to a mild adhesive remover, to clean up any adhesive that may be left behind. Best of luck!
Viewing 1-8 of 98
4.6 out of 5