
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
PC-Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134°F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time (20 minutes at 75°F), while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color (component a): White. Color (component B): Dark gray. Color (mixed): Concrete gray.
Product Size (oz.): 102 oz
Product Size (oz.) | 102 oz |
|---|
Application | Epoxy Kit |
|---|---|
Color/Finish | Brown |
Dry Color | Brown |
Dry to Touch (min.) | 30 min |
Formula | 2 Part |
Package Quantity | 1 |
Paint/Stain Clean Up | Mineral Spirits |
Paint/Stain Features | Moisture Resistant |
Product Form | Paste |
Recommended Surfaces | Brick, Cinderblock, Metal |
Returnable | 90-Day |
Set Time (Min.) | 20 |
Usage Location | General, Marine Environments, Masonry |
Manufacturer Warranty | Since mixing and use is beyond our control, Protective Coating Co accepts no liability other than refund or replacement due to product defect only |
|---|
No, it is not possible to extrude mixed or unmixed PC-Concrete 9 oz from the cartridge without a caulking gun. A high thrust (26:1 ratio) is preferred when extruding through the mix tube.
No, it is not possible to extrude mixed or unmixed PC-Concrete 9 oz from the cartridge without a caulking gun. A high thrust (26:1 ratio) caulking gun is preferred when extruding through the mix tube.
PC-Concrete Epoxy can fill cracks in brick. However, the 600 ml dual cartridge package requires a special dispensing gun to apply. Alternatively, PC-Concrete is packaged in a 9 oz package that can be dispensed from a standard size high thrust caulk gun. You may also want to consider the 1.4 oz syringe or the larger 102 oz. bulk package manual mix. PC-Concrete has the thick liquid consistency so filling large vertical cracks may experience slumping.
PC-Concrete Epoxy can fill cracks in brick. However, the 600 ml dual cartridge package requires a special dispensing gun to apply. Alternatively, PC-Concrete is packaged in a 9 oz package that can be dispensed from a standard size high thrust caulk gun. You may also want to consider the 1.4 oz syringe or the larger 102 oz. bulk package manual mix. PC-Concrete has the thick liquid consistency so filling large vertical cracks may experience slumping.
PC-Concrete will bond concrete to concrete.
PC-Concrete will bond concrete to concrete.
PC-Concrete can be applied at temperatures of 35F and above.
PC-Concrete can be applied at temperatures of 35F and above.
PC-Concrete would glue the Hardie board but the 2.8 oz. size needs a dispensing gun.
PC-Concrete would glue the Hardie board but the 2.8 oz. size needs a dispensing gun.
PC-Concrete is used to fill cracks and cavities in concrete driveways.
PC-Concrete 2.8 oz. can be used to fill the hole and redrill but requires an applicator gun to dispense it through the mix nozzle.
PC-Concrete 2.8 oz. can be used to fill the hole and redrill but requires an applicator gun to dispense it through the mix nozzle.
PC-Concrete can be applied thick or thin. It sticks to itself and can be applied in layers.
Viewing 1-8 of 153
4.4 out of 5