- Nothing stronger for anchoring applications
- The epoxy chosen to repair cracks in warehouse and factory floors
- Non-shrinking formula
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
PC Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134 degree F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component 1:1 ratio, 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time 20 minutes at 75 degree F, while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal all types, glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations.
Highlights
- Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry
- 3 times stronger than concrete
- Low VOC formula
- 600 ml dispensing gun required (not included)
- Includes 2 mixing nozzles
- High-tack paste resists moisture for application in damp environments and can be used in vertical applications
- Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F
- Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)
- Meets ASTM C881-99
- Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry.
- PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements.
- Return Policy
Product Information
Specifications
Product Size (oz.): 21.2 oz
Dimensions
Product Size (oz.) | 21.2 oz |
|---|
Details
Application | Epoxy Kit |
|---|---|
Color/Finish | Grey |
Dry Color | Gray |
Dry to Touch (min.) | 30 min |
Formula | 2 Part |
Package Quantity | 1 |
Paint/Stain Clean Up | Mineral Spirits |
Paint/Stain Features | Moisture Resistant |
Product Form | Paste |
Recommended Surfaces | Brick, Concrete |
Returnable | 90-Day |
Set Time (Min.) | 20 |
Usage Location | Masonry |
Warranty / Certifications
Manufacturer Warranty | Since mixing and use is beyond our control, Protective Coating Co accepts no liability other than refund or replacement due to product defect only |
|---|
Questions & Answers
what is the lowest temp that it can be used in
PC-Concrete can be applied at temperatures of 35F and above.
PC-Concrete can be applied at temperatures of 35F and above.
Can this be used to reattach a small broken piece in Hardie board cement siding ?
PC-Concrete would glue the Hardie board but the 2.8 oz. size needs a dispensing gun.
PC-Concrete would glue the Hardie board but the 2.8 oz. size needs a dispensing gun.
Does this product cover cement surface, that seal cracks in drive ways?
PC-Concrete is used to fill cracks and cavities in concrete driveways.
I have a hole in a stucco wall that is slightly too large for a bolt I need to put in. Can I use this product to fill the hole in and redrill it?
PC-Concrete 2.8 oz. can be used to fill the hole and redrill but requires an applicator gun to dispense it through the mix nozzle.
PC-Concrete 2.8 oz. can be used to fill the hole and redrill but requires an applicator gun to dispense it through the mix nozzle.
What depth can this be applied to
PC-Concrete can be applied thick or thin. It sticks to itself and can be applied in layers.
Can this be used for filling cracks in a concrete floor that forklifts will be driving over all day?
PC-Concrete is used to repair concrete floors that have cavities and cracks that heavy fork trucks drive over.
PC-Concrete is used to repair concrete floors that have cavities and cracks that heavy fork trucks drive over.
Can it be used for lag sleeves
PC-Concrete can be used with Lag Sleeves.
PC-Concrete can be used with Lag Sleeves.
How do you remove the plug?
Use a pair of pliers to pry the plug off.
Use a pair of pliers to pry the plug off.
Viewing 1-8 of 150
Customer Reviews
4.5 out of 5
