Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Protect your family with the Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm. The hardwired, ionization Kidde Firex Smoke Detector, Hardwired with Battery Backup, Smoke Alarm operates on a 120-Volt power source with a 9-volt alkaline battery backup. Using ionization sensor technology, the Kidde Firex Smoke Detector alerts to invisible fire particles, even during power outages. The Kidde Firex Smoke Detector, Hardwired with Battery Backup has green, constant LED light that indicates AC power is connected. Red LED blinking lights flash for standby, if the alarm senses combustion, fire, or smoke, alarm memory if the alarm is activated, and hush mode. UL Certified with a 10-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, & HUD.
Product Depth (in.) | 1.8 in |
|---|---|
Product Width (in.) | 5.6 in |
Alarm Sensor Type | Ionization |
|---|---|
Alarm/Detector Features | Battery Back-Up, Hush Button |
Alert Type | Siren |
Commercial/Residential | Commercial, Home |
Included | Batteries |
Pack Size | 1 |
Power Source | Hardwired |
Returnable | 90-Day |
Voltage (V) | 120 |
Certifications and Listings | UL Listed |
|---|
Hello. No. There is no adaptor for your current wiring harness that will work with our current alarms. It is important that all of the old alarms are taken down before putting up any new alarms. The existing wiring harnesses will need to be removed and rewired at each location, and the mounting brackets will also need to be replaced. Because current Kidde alarms are not compatible with that older FireX interconnected system, all of the older alarms should be replaced at the same time. We recommend that all connections be made by a qualified electrician and that all wiring used shall be in accordance with applicable electrical and fire codes.
Hello. Possibly. Smoke alarms should be replaced every 10 years. However, whether this alarm is a suitable replacement depends on the type of alarms currently installed and the requirements in your area. We recommend checking with your local authority requiring smoke alarms, usually your local fire department, to determine exactly what type of smoke alarms are required, where they are required, and whether they are required to be interconnected. Once you know what type of alarms you are required to have, please contact Kidde Product Support at 1-800-880-6788 with your existing alarms available and we will be happy to help identify replacement alarms that meet those requirements.
Hello. This is the I4618AC so not quite but close. There is no direct replacement for your alarms. That being said, you can use any of our current alarms to replace your older alarms. You will have to take down all of the older alarms before putting up any new alarms. You will have to change out the mounting brackets at each location but that will just take a screwdriver to change out. You will either have to change out and rewire the wiring harness plugs at each location or you can choose to use the KA-F2 adaptors to adapt the old plugs to this model of alarms The adaptors would plug into the old plugs and the new alarms would plug into the adaptors. Note that the adaptors will not work with our new Detect line of smoke alarms. The model for the adaptor pack is the 21028461 which includes the KA-F2 and the KA-B2 for some of the older BRK/First Alert plugs. Note that the adaptors will not work with our current line of alarms.
Hello. This alarm doesn't have an end of life beep. However, the alarm does only have a 10 year life from first use. It should be replaced after 10 years. It may be beeping for low battery or because the smoke chamber need to be blown out with compressed air. Try cleaning out the alarm with compressed air around the side edges and changing the battery. If that doesn't resolve the issue or if this I4618AC isn't the alarm you actually have, please call us at 1-800-880-6788 with the alarm in hand.
Ten is not too many. This alarm should work with the I4618A. If they are not connecting together, that sounds like there is a loose wire somewhere and a wire has come out of a wire cap holding the wiring harness plug to the wires in your house. If that doesn't resolve the issue, call us with the alarms in hand on location at 1-800-880-6788 and we can troubleshoot more and figure out what is going on.
Hello. There is no direct replacement for your alarms. That being said, you can use any of our current alarms to replace your older alarms. You will have to take down all of the older alarms before putting up any new alarms. You will have to change out the mounting brackets at each location but that will just take a screwdriver to change out. You will either have to change out and rewire the wiring harness plugs at each location or you can choose to use the KA-F2 adaptors to adapt the old plugs to this model of alarms The adaptors would plug into the old plugs and the new alarms would plug into the adaptors. Note that the adaptors will not work with our new Detect line of smoke alarms. The model for the adaptor pack is the 21028461 which includes the KA-F2 and the KA-B2 for some of the older BRK/First Alert plugs.
Hello. This alarm uses the older Kidde wiring harness and connects to a standard three‑wire household circuit: a black 120‑volt hot wire, a white neutral wire, and an optional red interconnect wire. The red wire is only used to link multiple alarms together so they can communicate with each other. For the exact wiring diagram, please refer to the I4618AC owner’s manual available on the Kidde website.
Hello. Yes. This is the I4618AC, with the same wiring harness and the same mounting bracket.
Viewing 1-8 of 628
4.4 out of 5