
Return this item within 7 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Wayne's CDU800 features a durable cast iron base and epoxy-coated housing for long life and quiet operation. This submersible pump is designed for small sump pits, as small as 11 in., the CDU series is one of the most popular replacement sump pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1-1/2 in. discharge allows easy installation. This powerful 1/2 HP sump, pumps up to 5100 GPH.
Dimensions: H 14 in, W 10 in, D 10 in
Product Depth (in.) | 10 in |
|---|---|
Product Height (in.) | 14 in |
Product Width (in.) | 10 in |
Amperage (A) | 3.8 A |
|---|---|
Cord Length (ft.) | 8 |
Discharge Flow @ 0 ft. (gallons/hour) | 5100 |
Discharge Flow @ 0 ft. (gallons/min) | 85 |
Discharge Flow @ 10 ft. (gallons/hour) | 3840 |
Discharge Flow @ 10 ft. (gallons/min) | 64 |
Discharge Flow @ 15 ft. (gallons/min) | 51 |
Features | Non-Clogging |
Housing Material | Steel |
Impeller Material | Plastic |
Maximum Horsepower (hp) | 1/2 |
Maximum Pressure (PSI) | 11.03896104 |
Maximum Working Temperature (F) | 120 |
Minimum Sump Basin Diameter | 11 to 14 |
Minimum working temperature (F) | 40 |
Outlet Diameter Connection (in.) | 1-1/2 FPT |
Pack Size | 1 |
Product Weight (lb.) | 18.5 lb |
Pump Switch Type | Vertical |
Returnable | 7-Day |
Switch-On Height (in.) | Medium (8-11 in.) |
Vertical Lift (ft.) | 10 |
Voltage | 120v |
Certifications and Listings | cUL Listed |
|---|---|
Manufacturer Warranty | 3 |
1-1/2 In. NPT Discharge for compliance with building codes
Hello Scott Please Contact us at 8002370987. Your plumb does not have a teether float but we do recommend changing out the float switch about every to years as it is a wear and tare item.
Hello Brasiel, The recommend depth is 22 inches in depth.
Hello, Thank you for your inquiry. This unit has been rated for safety standards for indoor use only.
Good afternoon, Check valves are required when installing a sump pump. Our discharge thread is 1 1/2 NPT. If you ever have any questions, or need assistance with anything, we’re here to help!
Hello thank you for your inquiry, the smallest pipe size for this unit is 1 1/4 pipe.
Hello thank you for your inquiry. As long as the pump is protected from the outside elements such as freezing temperatures, or debris going into the pit. This pump will be fine.
Hello no they are not the SPF50 is made with thermal Plastic where the CDU800 is made out of coated steel.
Viewing 1-8 of 121
4.8 out of 5