#1 Home Improvement Retailer

Internet # 325997291

Model # UR24983A

Store SKU # 1001878047

Product Images

Max 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee

$27.72
Apply Now
Pay $2.72 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Fastest way to connect PEX, copper, CPVC, or PE-RT pipe
  • Half the insertion force with double the burst pressure
  • Can be installed on wet lines and pressure tested immediately
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

SharkBite Max push-to-connect stop valves are the fastest and easiest way to connect to PEX, copper, CPVC or PE-RT stub-outs, which control and shut off water flow to fixtures or appliances. This newly designed fitting features a stainless-steel collet retainer which delivers additional strength and durability. SharkBite Max fittings and valves don't require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. The single lever quarter turn handle allows for quick control over water flow, especially in tight spaces. No soldering, clamps, unions, glue or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The valve can be rotated after installation for quick adjustments and removing the valve is just as fast with a disconnect tool, allowing them to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.

Highlights

  • Compatible with PEX, copper, CPVC PE-RT or HDPE pipe
  • Stainless steel retainer adds strength and durability
  • High-performance DZR lead-free brass body
  • No special tools, crimping, soldering or glue required
  • Can be rotated after installation
  • No PEX tube liner required
  • Approved for behind-the-wall applications with no access panels
  • Approved for underground applications (wrap required for burial)
  • Rated to 160°F and 125 psi
  • Third-party Listed, compliant with applicable U.S. and Canadian plumbing codes
  • 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT
  • 5-year warranty when properly installed with HDPE SDR-9
  • Patented technology
  • Shop SharkBite for all you Supply plumbing needs
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 325997291

Model # UR24983A

Store SKU # 1001878047

Additional Resources

Shop All SharkBite

Specifications

Dimensions

Inlet Diameter (In.)

1/2

Outlet Diameter (In.)

1/4

Product Length (in.)

2.874 in

Details

Application

Potable Water

Color/Finish

Silver

Compatible Pipe Material

Multi-Purpose

Compatible Product

Faucet, Toilet

Connection

PTC x Comp

Features

Removable

Indoor/Outdoor

Indoor

Material

Brass

Maximum Pressure (PSI)

125 PSI

Maximum Working Temperature (F)

160

Pack Size

1

Returnable

90-Day

Valve Configuration

Straight

Warranty / Certifications

Manufacturer Warranty

25-year warranty when properly installed on PEX, copper, CPVC and PE-RT

Questions & Answers

Is the valve considered on when the handle is parallel with the copper tubing, passing water to both the tubing and pass through of the shark bite (pipe) and off when the handle is parallel with the main pipe?
ByJan 17, 2026
1 Answer | 
Answer This Question

Yes, When the handle is parallel with the 1/2" pipe, it is off. When it pointed towards the 1/4" pipe, the valve is open/on.

By|Jan 19, 2026


    my copper pipe is 5/8 outside diameter 1/2 inch inside is this the right shutoff for that application
    BySep 14, 2025
    1 Answer | 
    Answer This Question

    Model UR24983A is designed for 1/2" copper tubing with a 5/8" OD.

    By|Dec 8, 2025


      Is this valve compatible with 1/4" clear plastic refrigerator ice maker / water line?
      ByJun 24, 2025
      1 Answer | 
      Answer This Question

      Hello Fred, Thank you for contacting Tech Support. This product is designed for adding supply lines to fixtures and appliances such as dishwashers, humidifiers and ice makers( 1/4 in. Compression) If you have further questions, please call us at 1-877-700-4242. Thank you

      By|Jun 30, 2025


        Can the 1/4 compression connection work with 1/4 pex tubing
        ByFeb 25, 2025
        1 Answer | 
        Answer This Question

        ​Yes, the SharkBite UR24983A features a 1/4-inch OD compression outlet that is compatible with 1/4-inch PEX tubing.

        By|Mar 14, 2025


          Is this the correct valve to connect a supply line for an Aprilaire Humidifier?
          ByNov 15, 2024
          1 Answer | 
          Answer This Question

          Hi John, The Max 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee can be used with your Aprilaire Humidifier. You will need to verify the size of the connector on your humidifier to verify it's compatible with the Tee Stop. If you have any questions or if we can be of assistance, please call tech support at 1-877-700-4242. Kind regards,

          By|Nov 19, 2024


            Will 1/4 ice maker line screw into it
            ByJun 22, 2024
            1 Answer | 
            Answer This Question

            Hi Doug, Thank you for contacting SharkBite. The Max 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee will screw on to a 1/4" compression thread ice maker water line. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

            By|Jan 7, 2025

              (1)

              How much pipe do you cut out to install?
              ByMar 26, 2024
              1 Answer | 
              Answer This Question

              Hi Michael, Thank you for contacting SharkBite. When installing the Max 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 1/4 in. Compression Chrome-Plated Brass Service Stop Tee you will need to remove .90" or 7/8". I've attached a link to the Tee Stop spec sheet. You will subtract the insertion depth (1" on each side) from the length (2.9") of the Tee Stop and that is how much pipe you would need to remove. If you have any more questions you can call tech support at 877-700-4242. (https://www.sharkbite.com/sites/default/files/files/sharkbite-max-service-stop-spec-sheet-2023.pdf) Kind regards,

              By|Oct 18, 2026

                (5)

                If you have a rigid copper pipe above and below the saddle valve going into the water heater, how do you install this shut off T to replace saddle valve?
                ByJan 15, 2024
                1 Answer | 
                Answer This Question

                Hi Edward, Thank you for contacting SharkBite. If you a e still in need of installation assistance please call tech support at 877-700-4242. Kind regards,

                By|Jan 4, 2025

                  (2)

                  Viewing 1-8 of 8

                  Customer Reviews

                  4.8 out of 5

                  • 4.8 out of 350 reviews
                  • 100% recommend this product
                  Filter by:
                  Showing 1-10 of 350 reviews
                  Fits and works perfectly as intended.
                  by
                  • Verified Purchase
                  This part works great. Easy to install and the quarter turn on off is perfect. I inherited 2 old style refrigerator 1/4" water sources that would not shut off so I could move the fridge. Removed both and replaced those with the sharkbite, done.
                  by
                  • Verified Purchase
                  Works Great Easy Install
                  Typical Shark Bite. Easy to use, no soldering required. Perfect if you don't know how to solder or don't have the equipment. Just make sure ro deburr the pipe prior to installation or you risk damaging the inside gasket. Good for fridge water or humidifier.
                  by
                    • Recommended
                    Worked great. Just as expected....
                    Worked great. Just as expected.
                    by
                    • Verified Purchase
                    1 found this review helpful
                    A great, and very easy solution to connecting my fridge water line to the 1/2 main. It's also muc...
                    A great, and very easy solution to connecting my fridge water line to the 1/2 main. It's also much cleaner and I believe less likely to leak than using the saddle valve connector. I have nominal experience in these matters too but my best friend has been the mini pipe cutter.
                    by
                    • Verified Purchase
                    • Recommended
                    1 found this review helpful
                    Quick and easy beats soldering any day
                    Quick and easy beats soldering any day
                    by
                    • Verified Purchase
                    • Recommended
                    Just as easy to install as can be. So nice to be able to address a leak in just a matter of minutes.
                    Just as easy to install as can be. So nice to be able to address a leak in just a matter of minutes.
                    by
                    • Verified Purchase
                    • Recommended
                    Product went onto the 1/2 pipes rather easily, however the 1/4 inch compression nut cracked upon ...
                    Product went onto the 1/2 pipes rather easily, however the 1/4 inch compression nut cracked upon installation, luckily I had another handy from a different project. It would have been a real pain to have to drive all the way back to home depot to get replacement.
                    by
                      So far so good I’ve used sharkbite fittings before they seem to do a good job. I’ve had some for literally years haven’t leaked yet. and are so easy to use.
                      by
                      Worked as advertised and was easy to install.
                      by
                      • Verified Purchase
                      Showing 1-10 of 350 reviews

                      Compare Key Features

                      current item

                      Product Snapshot

                      Ideal for easy plumbing connections to PEX, copper, CPVC, or PE-RT, ensuring quick and reliable water shut-off.
                      Ideal for easy plumbing connections to PEX, copper, CPVC, or PE-RT, ensuring quick and reliable water control.
                      Ideal for quick and easy plumbing connections to PEX, copper, CPVC, or PE-RT, ensuring a secure, leak-free seal.

                      Valve Type

                      Stop
                      Stop
                      Stop

                      Material

                      Brass
                      Brass
                      Brass

                      Size Compatibility

                      1/2 in., 1/4 in.
                      Fits standard pipe sizes
                      1/2 in.

                      Maximum Pressure Rating

                      125 psi
                      125 psi
                      125 psi

                      Corrosion Resistance