#1 Home Improvement Retailer

Internet # 207004202

Model # 3752

Product Images

Exclusive

1/2 in. x 2 ft. x 4 ft. Europly Walnut Plywood Project Panel (Free Custom Cut Available)

$62.32
Apply Now
Pay $37.32 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Free custom cut available - See details below
  • Walnut plywood strength, performance and durability
  • 11 ply walnut hardwood plywood with eurostyle edge
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

Columbia Forest Products Europly plywood is a premium veneer core panel with a visually striking euro style edge. Use the decorative veneer of your choice and from any angle, the look is visually striking. A premium panel where the edge competes with the face for beauty. Featuring urea formaldehyde-free technology, Europly is perfect for any furniture, millwork or cabinetry project. Extremely uniform and practically void free, this all-birch hardwood core provides excellent physical properties for superior machinability and an exposed-edge detail favored in modern, green design. Multiple plies of birch veneer render an aesthetically beautiful edge appearance. Europly is smart, visual and responsible.

Highlights

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Note: The form is not available on mobile devices.
  • Multi-layer hardwood core panel composed of 100% birch construction with an exposed eurostyle edge finish
  • Urea formaldehyde-free technology
  • Decorative top and bottom veneers, measuring approximately 1/50 in. thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/2 in. x 2 ft. x 4 ft.; actual: 0.453 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 12 lbs.
  • Grade: B-2
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 207004202

Model # 3752

Specifications

Dimensions

Actual Product Length (in.)

48.000 in

Actual Product Thickness (in.)

0.453 in

Actual Product Width (in.)

24 in

Nominal Product Length (ft.)

4

Nominal Product Thickness (in.)

1/2

Nominal Product Width (ft.)

2

Details

Exposure Durability

Interior

Pack Size

1

Plywood Features

Paintable, Sanded, Stainable

Plywood Product Type

Project Panels

Project Panel Type

Hardwood Plywood

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

Product warranted against glue or bond failure. Product replacement provided.

Questions & Answers

Do you recommend sealing or varnishing walnut vener product? If so what kind?
BySep 19, 2025
1 Answer | 
Answer This Question

We typically recommend you consult a finishing expert with questions related to this, because they will be much more familiar with what products are available and the different outcomes they can achieve. I recommend asking your local HD pro in that department, however, you are welcome to call us if you want to talk it through as well. 800-637-1609. Thanks - Michael

By|Sep 22, 2025


    Is this a product 100% made in the USA?
    ByJan 13, 2025
    1 Answer | 
    Answer This Question

    Hi, This core will come from Poland, but the walnut and assembly are in the US.

    By|Jan 13, 2025


      Do they offer a 3/4 inch edge band in walnut to cover up the laminated core?
      ByJan 5, 2024
      1 Answer | 
      Answer This Question

      Hi, For edge banding, i would speak with someone at your local Home Depot. They will know what will work best for that! If you do have more questions, you can reach me at alec.neugent@cfpwood.com.

      By|Jan 6, 2024


        Picture shows 10 or 11 plies, but the description says 7 ply. Which is it?
        BySep 4, 2023
        1 Answer | 
        Answer This Question

        Hi, I'm not sure where the description says 7 ply, but our 1/2" is going to be 5 ply. 3/4"-7 ply, 1/2"-5 ply.

        By|Sep 6, 2023


          I've seen a lot of plywood at the store that has less than 1/32" veneer. I need to edge join two pieces to make a 29" deep top, and will probably need to sand-out the joined edge, so I'd like to make sure there's enough veneer to sand with 120/220.
          BySep 4, 2023
          1 Answer | 
          Answer This Question

          Hi, We do sand to 180 grit before we ship, but you should be okay to sand lightly with 220 grit if you still need to once you receive it.

          By|Sep 6, 2023


            The Home Depot website says veneer on both sides. A review says one side is Walnut veneer the other side is Baltic Birch. Which is it? I need Walnut veneer on both sides TIA.
            ByAug 20, 2023
            1 Answer | 
            Answer This Question

            Hi, Yes, both sides should be the walnut veneer.

            By|Aug 23, 2023


              I do not see where tomout in my custom cur specifications. Where do i do put in the app
              ByJun 20, 2022
              1 Answer | 
              Answer This Question

              Hello, the custom cut form does not work well on the app, best if you use the website to enter your custom cut information.

              By|Jun 27, 2022


                Has grain filler already been applied to this panel or will I have to do it myself?
                ByApr 7, 2022
                1 Answer | 
                Answer This Question

                Hello, There is no filler applied to the panel. It is unfinished raw wood.

                By|Apr 8, 2022


                  Viewing 1-8 of 15

                  Customer Reviews

                  4.5 out of 5

                  • 4.5 out of 37 reviews
                  • 83% recommend this product
                  Filter by:
                  Showing 1-10 of 37 reviews
                  Very nice walnut ply and a good value
                  I bought six 1/2" 2' x 8 unfinished sheets and had them delivered to my lake home in the woods of northern MI to build a slat wall in our kitchen and a surround for a refrigerator.. I was very pleasantly surprised by the quality of the wood and the incredible convenience of having it delivered. I am going to order more to cover walls in a large upstairs bedroom. To me the delivery makes this is very good value given I don't have to handle except to finish it and put it up on the walls.
                  by
                    • Recommended
                    2 found this review helpful
                    Nice Walnut Plywood
                    I ordered 1 sheet of the 1/2 in. x 2 ft. x 4 ft. Europly Walnut Plywood. The plywood was packaged and shipped to my doorstep without any damage. This is high quality hardwood and heavier than expected. This came with with no voids on the exposed edges. I cut this in half without any chipping. Not sure I'm liking the wood grain on the one side of the panel, big light and dark spaces compared to the smooth side. I'm making shelves out of this. I'm cutting out cats on this wood for shelves for my cats. You can see where I drew them on the back side of the wood.
                    by
                    • Recommended
                    2 found this review helpful
                    High quality clear ply
                    The 1/2 in. x 2 ft. x 4 ft. Europly Walnut Plywood Project Panel is a cabinet grade / furniture grade plywood with clean and consistent laminations. This plywood is sanded smooth on the face and has veneer laminated edges that are visually striking due to the uniformity. Each layer of veneer is clear with very few minor voids around the edge. The plywood was adequately packaged and shipped to my doorstep without issue. It is also urea formaldehyde-free.
                    by
                    • Recommended
                    Outstanding Quality in Hard-to-Find style!
                    I build a lot of small, custom cabinets and furniture, but finding quality hardwood in our rural area is a huge challenge. There are no fine hardwood stores nearby, so to find plywood project panels via Home Depot is a tremendous benefit. These aren't typical “big box” project panels though: they are fashioned with hardwood veneer on one side (walnut in this case) and birch veneer on the other – perfect for boxes/cabinets where the inside needs to be light-colored. Built on many plys of birch as the core, with no voids inside, exposed edges can be left uncovered for a decorative touch (see photo). The plain-sliced walnut veneer is 1/50” thick, more than enough to cut without chipping and sand lightly for final finishing. It's beautiful walnut too, with great contrast and good figure. Since it's mail-order and ship-to-home, I don't get to pick the grain I want and shipping fees add up, but it's worth the convenience for small projects. It's like finding a hidden treasure! I'll be buying some of the other hardwood Europly panels in short order!
                    by
                    • Recommended
                    2 found this review helpful
                    Lots of damge in shipping and handling. Veneer patterns are not great either.
                    Packing was terrible. Both 4'x4' sheets were damaged on edges and had deep scratches in the veneer up to about 5" inches from the edge making about 11% waste. The veneer pattern on one side was unusable. the actual ply portion looks great though.
                    by
                    Response from CFP Customer ServiceSep 16, 2026
                    I apologize for the condition this panel arrived to you in. That is an excellent piece of material so I can understand the frustration. If you want to discuss in more detail, please call me at 800-637-1609. Thanks - Michael
                      Do you even know what a good veneer looks like?
                      I'm amazed by the 5-star reviews alongside pictures of B-grade (or worse) veneer patterns. It's clear that commenters aren't used to looking at top-quality veneered plywood. This is a premium product, but what they're shipping is not even project-grade. It's sad that Columbia is laying down such terrible veneer on these planks. My last two orders have had grain patterns that were unusable even on the A-side... and almost trash-walnut on the back-side. The good news is (1) it's easy to order (2) shipping is free and (3) returns are easy, so I'll keep ordering planks until a good one arrives... which DOES happen, just not at the frequency it should given the nature of this product.
                      by
                      Response from CFP Customer ServiceSep 16, 2026
                      I am sorry to hear this type of feedback. You make several good points, and I would like the opportunity to discuss in more detail. Keep in mind that veneers are held to very specific standards for both face and back that have been set forth by the Decorative Hardwoods Association (HPVA) and we will stand behind the product if it falls outside of the advertised parameters. It is a natural product so no two panels have the same grain patterns and some are more appealing than others based on personal preference. If you would like to discuss, call us at 800-637-1609 Thanks - Michael
                        Material as described. Veneer is extremely thin, but is as described.
                        by
                        • Verified Purchase
                        Use to assemble cabinet doors plywood matched solid walnut stock perfectly! Thanks for a great product!
                        by
                        This customer chose to rate the product and not provide text.
                        by
                        • Verified Purchase
                        This customer chose to rate the product and not provide text.
                        by
                        • Verified Purchase
                        Showing 1-10 of 37 reviews

                        Compare Key Features

                        current item

                        Product Snapshot

                        Perfect for furniture, millwork, or cabinetry projects, this plywood panel offers a visually striking Euro style edge and is suitable for painting or staining.
                        Ideal for DIY projects or professional use, this plywood offers paintable and stainable surfaces for a customized look.
                        Ideal for environmentally conscious DIYers, this plywood offers water-resistance and formaldehyde-free construction for a healthier home.
                        Perfect for furniture, millwork, or cabinetry projects, this panel features a visually striking euro style edge. A premium panel where the edge competes with the face for beauty.

                        Panel Dimensions

                        0.45 in. x 24 in. x 48 in.
                        0.2 in. H x 12 in. W x 19.1 in. L
                        0.453 in. x 24 in. x 96 in.
                        0.453 in. x 48 in. x 48 in.

                        Material Type

                        Birch
                        Mahogany
                        Hardwood Plywood
                        Birch

                        Surface Finish

                        Eurostyle Edge
                        Decorative Veneer
                        Smooth
                        Walnut

                        Moisture Resistance

                        Pre-sanded Surface