6 Amp Corded AC Biscuit Joiner Kit with Dust Collector and Bag

Hello, Jamesc - Thank you for your question. It sounds like you could benefit from some real time in depth troubleshooting with us, please reach out to us via chat/text/phone so we can assist. Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 6 Amp Corded AC Biscuit Joiner Kit with Dust Collector and Bag. - Jesse

I also found the scale confusing. I use a scrap piece of wood to center the jointer. That way I know I am centered on the edge of the wood.

Hi, Kevin. Thank you for your interest in the RYOBI 6 Amp AC Biscuit Joiner Kit with Dust Collector and Bag. If you are referring to the cutting depth it is 0-9/16 in. If you are inquiring about a different feature I would recommend contacting our Product Support Team. Thank you for asking, if you have further questions and would like to speak with a RYOBI Customer Experience Professional, all contact services are available Monday- Friday from 9am to 6pm (est) to contact us toll free please call or text 800.525.2579. Other methods of contact offered are email (24 hr response) or live chat, to speak with someone immediately at https://www.ryobitools.com/support/contact I hope this helps! - Jewel

Donald, thank you for your interest in the RYOBI 6 Amp AC Biscuit Joiner Kit with Dust Collector and Bag. The biscuit joiner has an 8-tooth carbide-tipped blade for cutting biscuit slots. Thank you for asking, if you have further questions and would like to speak with a RYOBI Customer Experience Professional, all contact services are available Monday- Friday from 9am to 6pm (est) to contact us toll free please call 800.525.2579. Other methods of contact offered are email (24 hr response) or live chat, to speak with someone immediately at https://www.ryobitools.com/support/contact I hope this helps! - Vini

Jackie, thank you for your interest in the RYOBI 6 Amp AC Biscuit Joiner Kit with Dust Collector and Bag. If you are having a hard time finding replacement blades for the product please speak with a RYOBI Customer Experience Professional, all contact services are available Monday- Friday from 9am to 6pm (est) to contact us toll free please call 800.525.2579. Other methods of contact offered are email (24 hr response) or live chat, to speak with someone immediately at https://www.ryobitools.com/support/contact We would be happy to help you locate new blades. Thank you for asking, I hope this helps! - Vini

There aren't a whole lot of differences, but yes, JM83K is an upgraded and revised version. You can check the label on the box, it would have a manufacturing date. They don't sell a ton of them, so it's not a surprise that the store has both models, but the older one should go back to 2018 if not further. The JM83K has a slightly faster motor (11000 RPM vs 10000) and a revised nose plate and motor housing. I found it to be a very good joiner. I had a chance to use DeWalt and Porter-Cable units and I certainly prefer the vertical handle and the beefier nose plate of the Ryobi (which you can hold down with your left hand).

Hi Jim, The JM83K is the latest model it has a design change, the bag was changed and the RPM we increased to 11,000. This is just a few differences. Thanks for asking. Greg

Hi Vicki, Yes you can use this tool to join 1-1/2” butcher block, but you will want to set it to the max edge distance and use 2 biscuits per horizontal location, one off each upper and lower edge. You will also want to space the pairs no more than 12” apart for a strong joint, especially if you are joining a long run.

Yes it does but remember that you need to reverse the growth rings of your boards

Yes, but although the edge distance is adjustable, you will still want to put the biscuits in rows of two, and use the largest size. You will also want to space them no more than 12” apart for good strength.

Hi Vicki, That is the type of task this was designed for. Thanks for asking. Greg

Hello, Steve! If you've checked to be sure you have the correct slot size and biscuits, you can make micro-adjustments to the slot depth setting. There is a troubleshooting guide in the operator manual, or feel free to call our customer service line for help. 1-800-525-2579

Yes. There’s going to be a little room particularly end to end. You’re right, the biscuit will swell and become snug when the glue dries. I’d also double check that your blade is tight.

It should fit snug. Easy in, and out if needed. Not tight enough to tap in. But mine has always been somewhat snug, as I applied it.

Yes.

It all depends on the biscuit you are using. Some biscuits will have a lot of play or fit tightly in the slot. I always sort the biscuits before using them so I know how each will fit. Usually 3 piles. Loose, just right & tight. Use your vice on the too tight ones and then they will be just right. Make sure you are using the correct biscuit for the size of slot you are cutting.

If you mean is it normal to have slight horizontal play of the biscuit in the slot, yes. Still performs a tight fit when glued and clamped,

Hello Rick, and thank you for your question! I am unsure what the "similar item" is without a provided make or model #. Also, this 6 Amp Biscuit Joiner is listed at a price of $99.97 itself. However, if you view the item page on the Home Depot's website, typically it shows comparable specs between similar items.

Can't "see" the similar item you mention so best to provide a make and model number. I like this model for it's easy setup and operation. The only fault is that the dust collector bag clogs easily but for the price, I am very happy with this choice.