Product Images
- Ideal for residences, schools, offices, hotels, motels, and more
- Notifies you upon moisture detection to prevent leak damage
- Fully automatic design: needs no wiring or electricity
- View More Details
Free & Easy Returns In Store
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
When moisture is detected, the Zircon Leak Alert Wi-Fi will sound a 105 dB alarm, emit a visual warning by flashing an SOS, and will send an email via your Wi-Fi connection to up to 5 addresses; warning you of the water leak and potentially saving you thousands of dollars in water damage repairs. The Zircon Leak Alert Wi-Fi eliminates the need for all the expensive accessory equipment by operating on a hubless platform. Each unit operates independently of each other and can be individually named- allowing for an infinite number on units to be on guard protecting your space from water damage. Should a flood occur, the Leak Alert unit will float and continue to sound the alarm until the problem is resolved, or the battery is exhausted. Each Leak Alert Wi-Fi unit requires a standard 3v lithium battery (included). To keep your unit running optimally, Zircon designed the Leak Alert Wi-Fi to chirp and send an email notification when the battery is running low and needs to be replaced. To configure the Leak Alert Wi-Fi , youll need an established Wi-Fi connection and password (if applicable) and a Smart Phone, tablet, or Computer thats also connected to the Wi-Fi ne2rk. Then, simply follow the directions provided to connect to the Leak Alert Wi-Fi Unit, name the unit, and provide the emergency email address youd like to have notified when the alarm is sounded. Protect your home and work space by placing a Zircon Leak Alert Wi-Fi unit anywhere water leaks may occur.
Highlights
- Fully automatic no wiring or electricity required. includes a 3-Volt lithium battery; fully automatic no wiring or electricity required; includes a 3-Volt lithium battery; fully automatic no wiring or electricity required; includes a 3-Volt lithium battery; fully automatic no wiring or electricity required; includes a 3-Volt lithium battery
- Name each device with it's location during Wi-Fi set up and email alerts will direct you immediately to the source of the alarm
- Continuously monitors for leaks around sinks, dishwashers, appliances, refrigerators, washing machines, sump pumps, water heaters, hot tubs, water filtration units, and more
- Independent and hubless system allows unlimited number of leak alert Wi-Fi units to be set up and running at any given time; perfect for personal residences, schools, offices, hotels, motels, property management, commercial buildings and more
- Sends email notification and chirps when battery is low, so units can be maintained for optimal performance
- Loud 105 dB alarm and flashing SOS alarm still sound even when Wi-Fi isn't available (email alert is dependent on Wi-Fi availability)
- Click here for more information on Electronic Recycling Programs
- Return Policy
Product Information
Specifications
Dimensions: H 2 in, W 5.5 in, D 11.5 in
Dimensions
Product Depth (in.) | 11.5 in |
|---|---|
Product Height (in.) | 2 in |
Product Width (in.) | 5.5 in |
Details
Battery Size | 3-volt |
|---|---|
Features | Audio Alert/Siren, Low Battery Indicator |
Included | Batteries |
Indoor/Outdoor | Indoor |
Number of Sensors Included | 1 |
Pack Size | 1 |
Power Options | Battery |
Range (ft.) | 0 ft |
Remote Access | No Remote Access |
Requires Hub? | No Hub Required |
Returnable | 90-Day |
Sensor Location | Water Leak |
Smart Home | Smart Home Enabled |
Smart Home Protocol | Wi-Fi |
Voice Control Hub Required | No Voice Control |
Works With | No additional compatibility |
Warranty / Certifications
Manufacturer Warranty | Zircon Corporation ("Zircon") warrants to the original purchaser (or original user by gift) that this product will be free from defects in materials and workmanship for its useful life (not to exceed twenty years from date of purchase). |
|---|
Questions & Answers
How do you test the alarm to see if the battery is good?
Hi Kathy - 4. TESTING Wet your finger and touch the two metal sensing contacts on The Detector. A loud, repetitive series of beeps will sound and the LEDs will flash red. Dry the contacts to stop the alarm. Check all email addresses to confirm successful receipt of test notifications. If a notification is not received, check your Wi-Fi connection and repeat the steps in Sections 2 and 3. Ensure all user information was entered correctly, then perform the test again. If notifications still are not received, visit http://zircon.com/how-to/tips-and-tricks/ leak-alert-wifi-setup for the latest product information/updates. Give us a call Toll Free, Monday through Friday, 8am to 5pm, Pacific Time. Our California Based Technical Support Team is happy to help, and can troubleshoot most user-error issues and provide solutions in just a few minutes time.
How can I recognize the entry in my router's list of connected devices? Does anyone know the MAC address prefix and/or chipset name? Thanks
Hello Pickngrin - Please review the Leak Alert WiFi Update in the provided link. https://www.zircon.com/wp-content/uploads/2018/08/2974B-LA-WiFi-Update-Inst.pdf If you require further assistance give us a call, toll free Monday through Friday 8am to 5pm, Pacific Time.
Is this 5g compatible
Thank you for your recent inquiry with The Home Depot. No, the Leak Alert Wi-Fi Electronic Water Detector is not compatible with 5 GHz Wi-Fi networks. It is designed to connect to a 2.4 GHz Wi-Fi network. We appreciate your business and look forward to serving you in the future.
Hi Janet, The Zircon Leak Alert Wi-Fi Electronic Water Detector is designed to connect to a 2.4 GHz Wi-Fi network. It is not compatible with 5 GHz Wi-Fi networks, which is common among many smart home devices. If you need further assistance, feel free to call us toll-free, Monday through Friday, 8am to 5pm Pacific Time. Our California-based Technical Support Team will be happy to help
Can the water contacts be placed in direct contact with the ground, or is there a slight gap between the water contacts and the ground?
The unit will sit on the floor. But if it gets 'damp' the alarm will trigger. I found I had to a slight shim [ several layers of duct-tape ] to lift it ~ 1/8th inch above a concrete floor.. [ or the metal surface if that's what it is on. ]
We own seven of these devices and they lie flat with the sensor wires on either bottom or side positions. No gap. One of our tile floors is somewhat conductive and caused false alarms The solution was to place the senor on a piece of toilet paper.
Hello Gld33. The contacts can be in direct contact with the floor. Thank you.
How many sensors in a package
Hello Efren - The particular package you may be asking about is for one (1) unit. Thanks for the question. - Zircon Technical Support
How long will the alarm sound for and what ways can it be turned off?
The Leak Alert WiFi will sound as long as the contacts are wet and for as long as the battery has power. The best way to turn the alarm off is to remove the battery and dry the contacts off. If you have any further questions please contact our customer service through the Zircon website. Thank you.
Does this support 5 ghz wifi?
Hello. Currently the Leak Alert WiFi does not support 5gh wifi. Thank you
So I would connect to this unit via its wifi, and then I would access a webpage within the unit to configure my wifi information & email address? Or does it require loading spyware on your phone or computer first? thanks
First question: yes, exactly Second question: no Works great. I have one behind my solid gold toilet at the kremlin
Sets up a temporary SSID and WiFi access point. You then log into the device using a particular IP address using common browsers and allow it access to your local WiFi network. No funny business apps to install but it will send emails through Zircon.
Viewing 1-8 of 16
Customer Reviews
4.1 out of 5
5
38
4
7
3
5
2
2
1
8
Loading Recommendations
Compare Key Features
Product Snapshot | |
|---|---|
Ideal for homeowners wanting leak detection, offering real-time alerts and battery backup for peace of mind. | Ideal for homeowners looking for leak detection, ensuring 24/7 monitoring and peace of mind. |
Battery Backup | |
Smart Connectivity | |
Interconnectivity | |
Voice Alerts | |
Detection Range | |
4 ft |
Related Products
Flo Detector, WiFi Enabled Water and Moisture Sensor, 1-Piece
The Moen Flo Shutoff installs on your home's main water line to monitor flow, pressure, and temperature 24/7, and automatically shuts off your water if it detects a leak, before it causes serious damage. Most water devices wait for a leak to happen, then send you an alert. The Flo Shutoff works differently. It proactively runs daily MicroLeak tests to find small drips, high pressure, and freezing conditions before they cause damage. When something is seriously wrong, it doesn’t just notify you, it automatically shuts off your water. A third-party LexisNexis study found homes with a Flo Shutoff saw up to a 96% reduction in water damage claim events. Stay in control from anywhere with the Moen Flo App, and add a FloProtect plan for extended warranty coverage and insurance deductible support. Because the Flo Shutoff installs in-line on your main water supply, professional installation is recommended. Water damage is the most underestimated threat inside a home; more common than fire and more costly than theft. Moen Flo exists to change that. We prevent loss, one drip at a time.
Smart Indoor Water Sensor, Wi-Fi Connected, Wireless (Battery) - White (1-Pack)
The SimpliSafe Water Sensor sounds the alarm whenever it comes into contact with water. Place it near common household water sources like a dishwasher, hot water heater or washing machine. With professional monitoring, we are notified and will alert you if your home is in danger.
Battery-Powered Smart Home Wi-Fi Connected Wireless Water Sensor, No Hub Required (3-Pack)
Protect your home against sudden leaks and water damage with the Feit Electric H20/WIFI smart water sensor. This compact battery-operated sensor mounts anywhere inside the home and uses the Feit Electric app to notify your smart device whenever water is detected. Get an audible alarm in the location of the moisture and smartphone alerts from anywhere in the world and stop leaks, overflows, and pipe bursts as soon as they happen. This sensor is perfect for homeowners with vacation properties, residential and commercial management companies, and short-term rental property owners who can't always be onsite but want to make sure their property is protected from flooding. Place it in bathrooms, laundry rooms, and in homes in flood zones to get peace of mind all year round. The sensor can be installed with mounting screws or with double-sided tape, for use in any space. Combine this sensor with other Feit Electric smart cameras and sensors for full home protection. A 2.4GHz network is required for Wi-Fi setup. Save on your water bill and get peace of mind with 24/7 protection, even when you're far from home.
