Exclusive
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Bring timeless grace and everyday reliability to your bath space with the Builders Towel Bar, a classic fixture designed for easy coordination. Characterized by smooth, curved post details, this wall-mounted bar is constructed from durable, high-strength metal, and is built to resist daily moisture and hold up under frequent family use. Concealed hardware delivers a sleek, seamless look, while the included mounting kit makes installation quick and simple. A staple of the trusted Builders collection, this versatile towel bar adds a polished, coordinated addition to any guest or primary bath update.
Bar Length (in.) | 18 in |
|---|---|
Product Depth (in.) | 3.54 in |
Product Height (in.) | 1.84 in |
Product Length (in.) | 19.84 in |
Bath Accessory Type | Towel Bar |
|---|---|
Color Family | Silver |
Color/Finish | Spot resistant brushed nickel |
Features | No Additional Features |
Finish Family | Brushed |
Included | Mounting Hardware |
Installation Type | Screw-In |
Mount Post Shape | Round |
Mount Type | Wall Mounted |
Number of Towel Holders | Single |
Number of Towel Holders | Single |
Pack Size | 1 |
Returnable | 90-Day |
Style | Industrial |
Weight Capacity (lb.) | 15 lb |
Dear Jimmy, the diameter is 16mm or 5/8” thank you!
Dear Jamhag, please note that the screws are included in the mounting hardware kit.
Dear Shono, Please note that if you mean it will get wet all the time, it is not recommended but I cannot imagine putting a towel on a bar where it will get wet all the time. The product is made from zinc alloy and stainless steel 201. Hope this helps!
Dear Chris, Please note the best way is to loosen the set screw on the bottom of the towel bar post until you can lift up the post. Then you can unscrew the wall mount screws on the wall mounting plate. Re center and install the wall mounting plate and then the towel bar post. If the off center is not big, you can just loosen the set screw and slightly adjust it sideways or up down and then tighten it. - Tiffany
Dear, thank you for your request, please note that Home Depot.com offers an internet # 204801234 that should be the set screw you are looking for. - Tiffany
Sorry, I do not know the answer to that question. But you could also check in the hardware department of the store, and I would take the part that needs the screw so you can match it up with the right size so you are not making extra trips! Good luck
My caliper gives me different readings along the bar in the range of 0.63xx inches.
Dear TJens, the diameter of the bar itself is 15.9mm-16mm. - Tiffany
Dear Sam, if your wall studs are 16" apart measuring from the inside edge of one to the inside edge of another, then you probably need a 18" TB. Please note if your previous wall studs are not Glacier Bay Builders then this info may not be relevant but should serve as a good guide for bar length. - Tiffany
Use the standard bar and cut to fit. Use something to cover the bar to prevent damage from Clamping while you cut it. The rough end will be hidden.
Dear Marissa, please send me your email address so I can send you the measurement of the bracket. - Tiffany
Viewing 1-8 of 17
4.5 out of 5
Sign up for emails & save 10% on select home decor. Valid on select items.
