Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
Specifications
Questions & Answers
Can you hang this vertically? You wouldn't be able to use the slots but is there a reason you couldn't use the peg holes?
Thanks for the question Dede! Yes, the panels could be used vertically as ONLY round hole pegboard. This means the accessories included, which are slotted, would not work if you turned these panels vertically. If you were looking to use these as simply traditional round hole pegboard, we would recommend purchasing just the panels, versus a "kit". Again, the accessories included in this kit will only work if the panels are installed horizontally as intended.
What is the weight capacity of this?
Hello and thank you for your question! We typically do not advertise load ratings because too much depends on the quality of installation, how weight is distributed both on the panels and on the hooks and shelves, as well as the age and quality of the substrate the panels are installed in to. Due to all of the variables involved in any given installation, we have found it potentially misleading to suggest proper “load ratings” that are generally formulated in laboratories under ideal conditions, specifications, and protocols that do not accurately reflect the actual real world applications that these products are used in. The point of failure is usually in the quality of installation. To that end, we would recommend being leery of any product in this category that boldly promotes a firm weight capacity. The panels and accessories can hold a lot, but what you are installing into needs to be solid and secure as well. That all being said, if you are installing into traditional drywall and using the included drywall anchors, our “recommendation” would be no more than 100 LBS per panel (200 LBS per panel into studs or similar), no more than 10-20 LBS per shelf assembly, no more than 10-15 LBS per hook that engages in 2 slots, and no more than 5-10 LBS per hook that engages in a single slot. All recommendations assume properly installed panels, weight relatively evenly distributed across the panel face, as well as weight situated at the base of each hook or shelf as opposed to the tip.
Would this install ok inside metal shed? Picture is of shed I?m purchasing
We cannot recommend it without seeing the actual shed and method of installation but we can say that, if installed to metal studs with the proper mounting hardware, these do perform very well in this environment.
What's the best, safest way to install this pegboard inside a resin shed?
Thanks for the question! Unfortunately we cannot recommend installation into plastic resin as load testing has not been performed into this substrate. Additionally, resin shed quality varies by manufacturer, some walls are more dense/less hallow than others. This is not to say it cannot be done, we just cannot speak to the safety of such a specific installation into an unknown construction. It might be helpful to reach out to the resin shed manufacturer to get their input on how best to mount to their walls. If you know what load and anchors they suggest, you can simply apply those capacities to this system and mount as instructed by the shed manufacturer.
How would you mount the system on an outside stucco wall?
Thanks for the question! You would need to purchase Stucco Anchors (wall anchors designed specifically for stucco applications) which you can find directly from Home Depot. Just be sure to identify the weight capacity of the anchors and don't put more weight on the panels than the anchors can support. Hope this helps!
Viewing 1-5 of 5
Customer Reviews
4.6 out of 5
Loading Recommendations
Compare Key Features
Product Snapshot | |||
|---|---|---|---|
Ideal for heavy-duty garage storage, this metal pegboard system (64 in. W) holds up to 200 lbs. and is easily expandable. | Built for heavy-duty tool storage, this metal pegboard kit offers versatile organization with a 200 lb. capacity. | Built for heavy-duty tool storage, this metal pegboard kit offers versatile organization with a durable, high-capacity design. Ideal for professionals and DIYers. | Built for heavy-duty tool storage, this metal pegboard kit offers versatile organization with a durable, high-capacity design. Ideal for professionals and DIYers. |
Weight Capacity | |||
200 lbs. | 200 lb. | 200 lbs. | 200 lbs. |
Size/Dimensions | |||
32 in. W x 8 in. H (each pegboard); 64 in. W total | 48 in. W x 32 in. H | 48 in. W x 32 in. H (three 32 in. x 16 in. panels) | 48 in. W x 32 in. H (three 32 in. H x 16 in. W panels) |
Material | |||
Metal | Metal | Metal | Metal |
Hole Spacing | |||
1/4 in. | 1/4 in. | 1/4 in. | 1/4 in. |
Weather Resistant | |||
Related Products
8 in. H x 64 in. W Garage Tool Storage Lawn and Garden Tool Organization Rack with Colorful Pink Pegboard and Black Hook
The Wall Control Garage Storage Lawn and Garden Tool Wall Organizer Rack is easy to install, attractive and ideal for storing ladders, rakes, brooms, weed eaters, trimmers, edgers, shovels, pitch forks, hedge clippers, saws, extension cords, rope, sledge hammers, axes, mops, garden spades, lawn and gardening hand tools, long handled lawn garden tools and folding chair storage. Metal Pegboards are over 10X stronger than conventional wooden pegboard, guaranteed to last a lifetime and will not warp or fray over time like traditional pegboard. The wall boards can even be wiped clean with a damp rag. Wall Control Garage Tool Storage Systems are attractive, adding a WOW factor to any garage, shed or tool wall. The Garage Tool Rack Lawn and Garden Wall Organizer includes 2 Wall Control 8 in. T x 32 in. W Pink Metal Pegboards with Black Hooks that can be used side by side to create a total tool storage area that is 8 in. T x 64 in. W or the Pegboard Rails can be used in separate locations for 2 separate wall-mounted tool organization areas. The Tool Storage Wall Rack includes an assortment of over a dozen of Wall Control's most popular black metal pegboard hooks and brackets to tackle any tool storage need. Wall Control Hooks have adjustable stabilizing tabs for added stability. The Wall Control Garage Wall Storage and Gardening Tool Organizer Rack Set works with any Wall Control pegboard hooks, brackets, shelves and attachments so expanding is easy. Mounting hardware is included.
8 in. H x 64 in. W Garage Tool Storage Lawn and Garden Tool Organization Rack w/ Grey Metal Pegboard and Black Hook Set
The Wall Control Garage Storage Lawn and Garden Tool Wall Organizer Rack is easy to install, attractive and ideal for storing ladders, rakes, brooms, weed eaters, trimmers, edgers, shovels, pitch forks, hedge clippers, saws, extension cords, rope, sledge hammers, axes, mops, garden spades, lawn and gardening hand tools, long handled lawn garden tools and folding chair storage. Metal Pegboards are over 10X stronger than conventional wooden pegboard, guaranteed to last a lifetime and will not warp or fray over time like traditional pegboard. The wall boards can even be wiped clean with a damp rag. Wall Control Garage Tool Storage Systems are attractive, adding a WOW factor to any garage, shed or tool wall. The Garage Tool Rack Lawn and Garden Wall Organizer includes 2 Wall Control 8 in. T x 32 in. W Grey Metal Pegboards with Black Hooks that can be used side by side to create a total tool storage area that is 8 in. T x 64 in. W or the Pegboard Rails can be used in separate locations for 2 separate wall-mounted tool organization areas. The Tool Storage Wall Rack includes an assortment of over a dozen of Wall Control's most popular black metal pegboard hooks and brackets to tackle any tool storage need. Wall Control Hooks have adjustable stabilizing tabs for added stability. The Wall Control Garage Wall Storage and Gardening Tool Organizer Rack Set works with any Wall Control pegboard hooks, brackets, shelves and attachments so expanding is easy. Mounting hardware is included.
8 in. H x 64 in. W Garage Tool Storage Lawn and Garden Tool Organizer Rack with White Metal Pegboards and Black Hook Set
The Wall Control Garage Storage Lawn and Garden Tool Wall Organizer Rack is easy to install, attractive and ideal for storing ladders, rakes, brooms, weed eaters, trimmers, edgers, shovels, pitch forks, hedge clippers, saws, extension cords, rope, sledge hammers, axes, mops, garden spades, lawn and gardening hand tools, long handled lawn garden tools and folding chair storage. Metal Pegboards are over 10X stronger than conventional wooden pegboard, guaranteed to last a lifetime and will not warp or fray over time like traditional pegboard. The wall boards can even be wiped clean with a damp rag. Wall Control Garage Tool Storage Systems are attractive, adding a WOW factor to any garage, shed or tool wall. The Garage Tool Rack Lawn and Garden Wall Organizer includes 2 Wall Control 8 in. T x 32 in. W White Metal Pegboards with Black Hooks that can be used side by side to create a total tool storage area that is 8 in. T x 64 in. W or the Pegboard Rails can be used in separate locations for 2 separate wall-mounted tool organization areas. The Tool Storage Wall Rack includes an assortment of over a dozen of Wall Control's most popular black metal pegboard hooks and brackets to tackle any tool storage need. Wall Control Hooks have adjustable stabilizing tabs for added stability. The Wall Control Garage Wall Storage and Gardening Tool Organizer Rack Set works with any Wall Control pegboard hooks, brackets, shelves and attachments so expanding is easy. Mounting hardware is included.
8 in. H x 64 in. W Garage Tool Storage Lawn and Garden Tool Organizer Rack with Green Metal Peg Board and Black Hook Set
The Wall Control Garage Storage Lawn and Garden Tool Wall Organizer Rack is easy to install, attractive and ideal for storing ladders, rakes, brooms, weed eaters, trimmers, edgers, shovels, pitch forks, hedge clippers, saws, extension cords, rope, sledge hammers, axes, mops, garden spades, lawn and gardening hand tools, long handled lawn garden tools and folding chair storage. Metal Pegboards are over 10X stronger than conventional wooden pegboard, guaranteed to last a lifetime and will not warp or fray over time like traditional pegboard. The wall boards can even be wiped clean with a damp rag. Wall Control Garage Tool Storage Systems are attractive, adding a WOW factor to any garage, shed or tool wall. The Garage Tool Rack Lawn and Garden Wall Organizer includes 2 Wall Control 8 in. T x 32 in. W Green Metal Pegboards with Black Hooks that can be used side by side to create a total tool storage area that is 8 in. T x 64 in. W or the Pegboard Rails can be used in separate locations for 2 separate wall-mounted tool organization areas. The Tool Storage Wall Rack includes an assortment of over a dozen of Wall Control's most popular black metal pegboard hooks and brackets to tackle any tool storage need. Wall Control Hooks have adjustable stabilizing tabs for added stability. The Wall Control Garage Wall Storage and Gardening Tool Organizer Rack Set works with any Wall Control pegboard hooks, brackets, shelves and attachments so expanding is easy. Mounting hardware is included.
