- Made from high-grade PVC for enhanced durability
- Suitable for drainage, waste, and vent applications
- Efficiently operates at maximum temperature of up to 140°F
- View More Details
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
The IPEX 1/2 in. PVC-PW Sch. 40-Potable Pipe is recommended for use in potable water pressure applications. Constructed of polyvinyl chloride (PVC). It can be used underground in systems that do not go lower than 33F.
Highlights
- Constructed of polyvinyl chloride (PVC)
- For use where systems will not exceed 140°F
- IAPMO certified
- Recommended for use in pressure, potable, water applications
- Can be used underground
- NSF listed
- Used underground in cold climates, ensure burial level is at least 12 in. below the expected frost line
- Note: Product may vary by store.
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions
Actual inside diameter (in.) | 0.602 |
|---|---|
Actual outside diameter (in.) | 0.84 |
Nominal Inside Pipe Diameter (In.) | 1/2" |
Product Length (ft.) | 10 ft |
Details
Application | Non-Potable Water, Potable Water |
|---|---|
Color Family | White |
Connectivity | Solvent Cemented |
Core Type | Solid Core |
DWV | Pressure |
End Type | Plain End |
Maximum Flow Rate (gallons per minute) | 21 |
Maximum working pressure (psi) | 600 |
Maximum Working Temperature (F) | 140 |
Minimum working temperature (F) | 33 |
Pack Size | 1 |
Pipe Features | No Additional Features |
Pipe or Fitting Product Type | Pipe & Tubing |
PVC Type | Rigid PVC |
Schedule Type | Schedule 40 |
Warranty / Certifications
Certifications and Listings | IAPMO Certified, NSF Listed |
|---|---|
Manufacturer Warranty | Limited Warranty |
Questions & Answers
How much does one of these pipes weigh?
can you bend it for making an arch over a garden bed
It’s possible but depending on the length and fastening system it may need to be heated and shaped to desired specifications.
Will this pipe bend at all?
Not without heat
Does IPEX comply with the Buy American Act for Federal Projects?
Hi Arco, this product complies with BABA.
Can this pipe be used for outdoor wiring for speakers and is it paintable?
Yes recommended for speaker, not sure on paintable
On shop can use for air lines
No, do not use this pipe for compressed air. It is approved for water pressure, but not for compressed air. When compressed air bursts a PVC pipe it can be very dangerous.
What is the outside diameter?
It says that it is 0.84 inch OD.
Is this strong enough for garden trellis for cucumbers,beans,peas and tomatoes? Nothing larger than.
This is not a VPC (Valencia Pipe Company) product. It belongs to IPEX Corporation so they should address it.
I use it for garden, works very well, would recommend supporting every 5 ft. Does sag slightly!
Viewing 1-8 of 19
Customer Reviews
4.7 out of 5
Loading Recommendations
Related Products
1-1/4 in. x 2 ft. PVC DWV Sch. 40 Pipe
PVC Schedule 40 Pipe is dual marked and can be used in DWV and pressure applications. Gradual sloping fittings are used for DWV applications. Sharply angled pressure fittings must be used for pressure. PVC Schedule 40 is highly durable, with high tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC Schedule 40 Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement.
3/4 in. x 24 in. PVC DWV Schedule 40 Pipe
This IPEX PVC schedule 40 pipe is recommended for use in pressurized applications that do not exceed 140°F. It works well in drainage, waste, and vent (DWV) applications. The 2 ft. length is handy for repairs or to finish off an installation.
1-1/2 in. x 2 ft. PVC DWV Schedule 40 Pipe
PVC Schedule 40 Pipe is dual marked and can be used in DWV and pressure applications. Gradual sloping fittings are used for DWV applications. Sharply angled pressure fittings must be used for pressure. PVC Schedule 40 is highly durable, with high tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC Schedule 40 Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement. Charlotte Pipe products are manufactured in the USA.
2 in. x 2 ft. PVC DWV Schedule 40 Pipe
PVC Schedule 40 Pipe is dual marked and can be used in DWV and pressure applications. PVC Schedule 40 is highly durable, with high tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC Schedule 40 Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement.
