4 in.x 1/4 in.Shed Resistant White Woven Mini Paint Roller (6-Pack)

A:  Hi ken, Yes, this is a very good roller for use on smooth surfaces and will give you a good, even finish. I would recommend you try a few test rolls to see how much product you load the roller with so that you can judge the best result for your project. Once you know that, it should be easy to make sure you have a nice application without any thin or thick spots. Hope this helps.

A:  I've never heard of clear polyurethane stain. If you mean clear polyurethane, then I would only use a very short nap roller if the poly is water based and I would roll it on thick and not too much rolling.

A:  It is not recommended to use a roller cover to apply polyurethane as they can cause the finish to bubble. A high quality brush will be the best option. Thanks, thanks

A:  Rolling is not recommended for polyurethanes because bubbling can occur. The best option is a good quality natural bristle or natural bristle blend brush. Thanks,

A:  Yes it should work fine being that it is shed resistant.

A:  I've never used this type of roller for applying polyurethane. I used a 4 in x 1/4 in. Mohair roller to apply polyurethane to all my doors, painted cabinets and also as a protective coat on bare wood and never had a single bubble.

A:  I used rod frame

A:  The frame specifically designed for the 6in mini rollers is SKU 458015, however the smaller frame (SKU 454465) will work with these as well. Thanks,

A:  I usually will just throw them away when I use them for non water clean up products.

A:  Ok which is the correct answer

A:  No, these mini rollers are not solvent resistance.

A:  Yes. They are resistant to most solvents. Thanks,