- Pre-finished in white and can be painted for a custom look
- Allows you to finish FRP tile installations easily
- Simply snap into place and glue
- See More Details
Frequently Bought Together
Product Overview
- FRP polymer extrusion is durable, low maintenance and easy to install
- Pre-finished in white and can be painted or stained
- Resists moisture, rot and termites
- Snaps into place on tile board and finishes corners where tiles meet
- Satisfaction Guaranteed
- Note: Product may vary by store
Info & Guides
Product Overview
- Pre-finished in white and can be painted for a custom look
- Allows you to finish FRP tile installations easily
- Simply snap into place and glue
Compare Similar Corner & Block
 | |  |  | |
| Brand | House of Fara | Royal Mouldings | Royal Mouldings | |
| Name | TT09 - 3/8 in. x 3/8 in. x 4 ft. Basswood Outside Corner Tinytrim Moulding | 854- 1/2 in. x 7/8 in. x 8 ft. PVC FRP Inside Corner Moulding White | 5093 - 3/4 in. x 3/4 in. x 96 in. PVC Composite Inside Corner Molding | 6606 11/16 in. x 1-1/8 in. x 8 ft. PVC Composite White Ply Cap Molding |
| Price | $174 | $273 | $353 | $558 |
| Ratings | (9) | (22) | (89) | (71) |
| Moulding Type | Outside Corner | Inside Corner | Inside Corner | Ply Cap |
| Material | Wood | Composite | Composite | Composite |
| Finish Type | Unfinished | Finished | Finished | Finished |
| Interior/Exterior | Interior | Interior | Interior | Interior |
| Application | General Purpose | Wall Trim and Chair Rail | Wall Trim and Chair Rail | Wall Trim and Chair Rail |
| Moulding Features | No Additional Features | Moisture Resistant,Rot Resistant,Termite Resistant | Moisture Resistant,Rot Resistant,Termite Resistant | Moisture Resistant,Rot Resistant,Termite Resistant |
| Product Length (in.) | 48 | 96 | 96 | 96 |
| Product Width (in.) | 0.375 | 0.875 | 0.75 | 1.125 |
| View Product | View Product | View Product | View Product |
Compare Similar Corner & Block
| | | | |
| Brand | House of Fara | Royal Mouldings | Royal Mouldings | |
| Name | TT09 - 3/8 in. x 3/8 in. x 4 ft. Basswood Outside Corner Tinytrim Moulding | 854- 1/2 in. x 7/8 in. x 8 ft. PVC FRP Inside Corner Moulding White | 5093 - 3/4 in. x 3/4 in. x 96 in. PVC Composite Inside Corner Molding | 6606 11/16 in. x 1-1/8 in. x 8 ft. PVC Composite White Ply Cap Molding |
| Price | $174 | $273 | $353 | $558 |
| Ratings | (9) | (22) | (89) | (71) |
| Moulding Type | ||||
| Material | ||||
| Finish Type | ||||
| Interior/Exterior | ||||
| Application | ||||
| Moulding Features | ||||
| Product Length (in.) | ||||
| Product Width (in.) | ||||
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Details
Warranty / Certifications
Questions & Answers
I need to install this to join inside corners of FRP sheets where vertical walls meet a sloped ce...
Asked by BK November 19, 2018I think you might be able to but gentle use of a heat gun would probably make the install look professional if perfect angles and lay flat surfaces are your goal. Good luck.
can i get this in another color than white? need black or brown.
Asked by jb June 21, 2017Go on the internet. It comes in 6 colors but the shipping charges will get you. A different lumberyard says they can order it in all the colors but you must do it on line.
How are these trim products attached to the walls? With the panel adhesive, screwed, other?
Asked by Eric January 30, 2020They slide onto the panel, and then the panel is glued. No need to use any type of adhesive on the corners themselves.
Not sure I understand...I only see ONE "slot" on ONE side that a panel would slide into, based on...
Asked by JessiMac1530 November 9, 2020You install a panel against one wall all the way to the corner (allowing for expansion) Now, either 1) Put the next panel into the slot and push it up against the corner to hold the previous panel in place. (probably the easiest) Or 2) Put a small bead of caulk or panel glue in the corner, then put it in the corner with the slot towards the next wall. Take the next panel and fit it into the slot. EITHER WAY, You probably want to slide both panels into place first WITHOUT any glue to make sure that the corner is straight (Ha!) and see where you may need to shave a little drywall, etc. so they butt up against each other in a straight line.
Is this product flexible/bendable? Can it be installed at a curved wall?
Asked by Jen August 1, 2020Hi Jen, no it is not. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Can I get this in 10' sections?
Asked by Bill October 15, 2019This item only comes in 8' Thank you
How are the Inside Corner and Cap Mouldings installed?
Asked by Mike March 4, 2019No.
Does this corner accept 1/4" thick sheets?
Asked by Brian July 29, 2015Thank you for your recent inquiry with The Home Depot. Unfortunately, I need more information from you in order to properly address your question. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot.
How can I remove the moulding to replace it? I have attempted dislodge with multiple tools and I ...
Asked by Laura October 9, 2017In order to be able to remove and replace this molding you'll have to completely remove one of the wall panels. Your panels interlock into this style molding.
I am looking for this product in white. I have been to Home Depots in New Rochelle and Port Chest...
Asked by Seamus March 2, 2017Thank you for your recent inquiry with The Home Depot, Seamus. This product is white and I am showing it in stock at your local stores. If you are unable to locate it, please partner with a store associate for assistance. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Customer Reviews
Related Products
Explore More on homedepot.com
More Products
Home Services, DIY Resources and Guides
Outdoor Living
Flooring Options
Doors and Windows
Tools and Hardware
Holiday Decorations