1/4 in. x 1 in. x 96 in. Metal Mira Lustre Plain Edging Moulding
- Made from high-quality, anodized aluminum to resist corrosion
- Features an attractive design to complement your home decor
- Precise construction makes it fit within cabinets and tabletops
- See More Details
Frequently Bought Together
Price:
Product Overview
A general purpose utility moulding that has a wide range of uses. This Moulding typically covers and creates a clean edge on cabinetry, table tops, or any other project that needs dressing up. Made out of aluminum, this provides an attractive surface that resists corrosion.
- Anodized aluminum - resistant to corrosion and abrasion
- Attractive appearance that will not chip or peel
- Cut edges will not rust
- Aluminum is 1/16 in. thick
Info & Guides
Compare Similar General Purpose Moulding
 | | |  | |
| Brand | Alexandria Moulding | Alexandria Moulding | Alexandria Moulding | Alexandria Moulding |
| Name | 1/8 in. x 3/4 in. x 96 in. Metal Mira Lustre Flat Bar Moulding | 1/4 in. x 1 in. x 96 in. Metal Mira Lustre Plain Edging Moulding | 1/4 in. x 1-9/16 in. x 96 in. Metal Mira Lustre Plain Edging Moulding | 1 in. x 1 in. x 96 in. Metal Mira Lustre Round Tube Moulding |
| Price | ||||
| Ratings | (10) | (59) | (32) | (39) |
| Moulding Type | S4S | Detail | Detail | Full Round |
| Material | Metal | Metal | Metal | Metal |
| Finish Type | Finished | Finished | Finished | Finished |
| Interior/Exterior | Interior | Interior | Interior | Interior |
| Application | General Purpose | General Purpose | General Purpose | General Purpose |
| Moulding Features | Moisture Resistant,Rot Resistant | Moisture Resistant,Rot Resistant | Moisture Resistant,Rot Resistant | Moisture Resistant,Rot Resistant |
| Product Length (in.) | 96 | 96 | 96 | 96 |
| Product Width (in.) | 0.75 | 1 | 1.5625 | 1 |
| View Product | View Product | View Product | View Product |
Compare Similar General Purpose Moulding
| | | | |
| Brand | Alexandria Moulding | Alexandria Moulding | Alexandria Moulding | Alexandria Moulding |
| Name | 1/8 in. x 3/4 in. x 96 in. Metal Mira Lustre Flat Bar Moulding | 1/4 in. x 1 in. x 96 in. Metal Mira Lustre Plain Edging Moulding | 1/4 in. x 1-9/16 in. x 96 in. Metal Mira Lustre Plain Edging Moulding | 1 in. x 1 in. x 96 in. Metal Mira Lustre Round Tube Moulding |
| Price | ||||
| Ratings | (10) | (59) | (32) | (39) |
| Moulding Type | ||||
| Material | ||||
| Finish Type | ||||
| Interior/Exterior | ||||
| Application | ||||
| Moulding Features | ||||
| Product Length (in.) | ||||
| Product Width (in.) | ||||
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Product Depth (in.)
0.25
Product Length (in.)
96
Product Width (in.)
1
Details
Application
General Purpose
Color Family
Aluminum
Color/Finish
Polished Silver
Finish Type
Finished
Installation Type
Fully Bonded Adhesive,Nail
Interior/Exterior
Interior
Material
Metal
Moulding Features
Moisture Resistant,Rot Resistant
Moulding Type
Detail
Pattern Number
16
Returnable
90-Day
Sell Pack Options
Single Item
Warranty / Certifications
Manufacturer Warranty
Guaranteed against manufacturing defects. See store for details.
Questions & Answers
9Questions31Answers
Is this paintable?
Asked by jbravo80 April 26, 20212
AnswersHello jbravo80, thank you for your inquiry. We recommend speaking with a specialist in the Home Depot paint department about which paint and processes are best for this product. Thank you.
It is out of the stock now. When would it be back in the stock?
Asked by Sanjay September 15, 20200
AnswersI have applied a laminate to my butcher block counter. Does this come with predrilled countersunk...
Asked by showered July 16, 20202
AnswersThank you for your inquiry Laminateguy. This item does not come with predrilled holes for installation.
can this be used on a radius?
Asked by bill July 3, 20201
AnswerHi Bill, thank you for your inquiry. Bending will depend on the size of the radius and the orientation of the moulding. If you were to lay this item flat with the widest face down it would not bend side to side, but it would bend marginally on the 1/4" direction (up and down).
Can this be used outdoors?
Asked by Bob May 26, 20185
AnswersYes, it is quite often used on folding tables that are used both indoors and outdoor.
Is this available in 1/2 in wide at home depot and can this be glued on with clear silicone caulk
Asked by Anis December 23, 20174
AnswersI don't think so.
can it be painted with latex paint and won't flake at some point
Asked by paint July 23, 20173
AnswersYou would have to sand and primer it.
What's the best way to cut this cleanly?
Asked by TrimIt March 22, 20179
AnswersExtremely fine tooth hack saw. 32 teeth per inch and then use very fine file or sanding block on the cut edge.
Can this be bent around corners with at least 2" radii?
Asked by Fromme January 15, 20165
AnswersNo it would kink.
Customer Reviews
May 7, 2019
Looked all over for this item and was happy to find it at Home Depot. The previous owner of my co...
Looked all over for this item and was happy to find it at Home Depot. The previous owner of my condo did a really poor job on a counter top, leaving a rough and crooked edge. This edge moulding was just what I needed to finish it off and completely change and improve the look, great product.
by steve
May 2, 2018
Nice Shiny trim edge moulding, not a super polish like chrome but shiny. the side is about 1" wid...
Nice Shiny trim edge moulding, not a super polish like chrome but shiny. the side is about 1" wide and the top is about 1/4" wide, it is just over 1/32" thick, the top overhangs about 7/32" and the side about 31/32" It is fairly easy to bend if you are careful, it does not have any pre-drilled holes
by SCOTT
Jun 13, 2017
The item came in a bullet proof heavy duty cardboard tube and was wrapped in a protective plastic...
The item came in a bullet proof heavy duty cardboard tube and was wrapped in a protective plastic saran wrap. Despite this when unwrapped, one end had obvious scratches from the factory on the outer finished surface that made that end unusable. Other than that, the item was ideal for the intended use which was upholstery edge trim in a special interest vehicle. My rating would be a five star if not for the scratches.
by Bob
Apr 5, 2017
I had a problem in my new guest bathroom, i installed the vanity cabinet and accidentally damag...
I had a problem in my new guest bathroom, i installed the vanity cabinet and accidentally damaged the corner of the mirror which resulted in a small chip in the corner. It was hardly noticeable but could have been dangerous as the chipped corner was extremely sharp. I ordered a couple of these moulding strips cut them to length and carefully mitered the corners. As this was aluminum i was able to use my table saw to make the cuts. If you are not experienced with doing this sort of work on a table saw use a std miter block and hacksaw as this can be very dangerous for the inexperienced person.
Im very happy with how this turned out and even though i lost over and 1 1/2" on the width of the mirror it still is plenty big enough to use.
by SFXPHIL
Related Products
Explore More on homedepot.com
Top Brands
HVAC and Electrical
Lumber, Building Materials and Safety Equipt
- Buy Unbranded 15/32 in. x 4 ft. x 8 ft. 3-Ply RTD Sheathing-132411
- AFCO Moulding & Millwork
- WarmGuard Material Handling Equipment
- PVC Surface Mount Tiles
- Swan Moulding
- Ivory General Purpose Moulding
- Colonial Elegance Stair Parts
- ANVIL Concrete Floats
- Buy Royal Building Products 5523 29/64 in. x 3-1/4 in. x 8 ft. PVC Composite White Colonial Base Moulding-0552308056
Flooring Options
- Buy Sika 50 lbs. Self-Leveling Underlayment-517004
- Buy Jeffrey Court Shadow Mountain Gray 11.375 in. x 12.25 in. Penny Round Matte Porcelain Wall and Floor Mosaic Tile (0.967 sq. ft./Each)-97934
- Buy Lifeproof Shadow Hickory 7.1 in. W x 47.6 in. L Luxury Vinyl Plank Flooring (18.73 sq. ft. / case)-I179411L
Tools and Hardware
Kitchen Design and Remodel