#1 Home Improvement Retailer

41 in. x 2-3/4 in. x 1/4 in. Double Rubber Strapping for Wood Faux Beam

$4351
Apply Now
Pay $18.51 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Rubber construction for durability and strength
  • Easily attaches to beams with adhesives and nails
  • Lightweight design for easy handling
How to Get It
caret

Product Details

To heighten the overall authenticity of a faux beam installation, American Pro Decor's rubber faux beam strapping replicates the look of the heavy, forged wrought iron fastening hardware used to secure and affix the beams of yesteryear in place. American Pro Decor's rubber beam strapping, which is purely decorative, can be used to hide seams when fastening two beams together. Sold in rolls, rubber beam strapping can be readily cut with a utility knife or scissors and attaches to beams via adhesive and finishing nails.
  • Size: 2-3/4 inches wide x 1/4 inch thick x 41 inches long (approximated)
  • Easy to install
  • Made of rubber
  • Replica of authentic forged wrought iron
  • Cut with a utility knife or scissors
  • To order a 6 in. long Sample Piece use # 5APD10322
  • Installs with PL premium adhesive, push a thumb tack through the strap into the beam; allow adhesive to dry then remove thumb tack
  • Light weight
  • Bolt Spacing: 4" (4-3/4" Center to Center)
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

8Questions
caret
Q:How long do the beans come
by|Feb 20, 2021
2 Answers
Answer This Question

A:  Our beams were 13 feet. Very easy to cut to size. We used the inside of the beam to measure and draw our cut lines

by|Jul 9, 2021

    A:  Thanks for our inquiry. All our faux wood beams offered on Home Depot are 13 foot long. We do offer custom sizes. For that, we need to provide you a quote. email a request to sales@americanprodecor.com

    by|Feb 22, 2021
      caret
      Q:Do these adhere to real wood veneer or just to the faux wood you sell?
      by|Jun 12, 2020
      2 Answers
      Answer This Question

      A:  Thanks for your inquiry. It would adhere to wood veneer as well.

      by|Jun 15, 2020

        A:  Thanks for your reply. My question assumed the product came with a specific adhesive, one that you recommend. But, I now realize that's not the case. Is there one that works best? I'd use it on real wood (veneer), but, if you know of an adhesive that works on the faux wood, it ought to work equally well on the real thing. Thanks in advance.

        by|Jun 16, 2020
          caret
          Q:Can it be used outside over an overhang?
          by|Sep 29, 2019
          1 Answer
          Answer This Question

          A:  Thank you for your inquiry. No, this faux strapping is not rated for outdoors. It is for interior use only.

          by|Nov 25, 2020
            2 found this answer helpful
            caret
            Q:What is the measurements between the nail heads. The pattern repeat?
            by|Mar 15, 2019
            1 Answer
            Answer This Question

            A:  Thank you for your inquiry. The Bolt spacing is 4" ( 4-3/4" C-C ).

            by|May 31, 2020
              1 found this answer helpful
              Showing 1-4 of 8
              caret

              Customer Reviews

              4.4 out of 5
              (41)
              • 4.4
                out of 41 reviews
              • 78%recommend this product
              Filter by:
              Showing 1-10 of 41 reviews
              Relatively easy to install. We cut ours with a utility...
              Relatively easy to install. We cut ours with a utility knife and square for a straight cut. The glue we used was Loctite PL Premium which can be used on Polyurethane. Once glued we used pins to hold it in place then removed the pins 24 hours later. The beams are very realistic so they are not flat a smooth. The straps won’t always lay flat or not have a gap. But with patience you will get them to look great.
              by
              • Verified Purchase
              Has a great look, easy to work with, and at a great price.
              Has a great look, easy to work with, and at a great price.
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              Very easy to attach, on the beam on the ceiling you cant even tell its rubber
              Very easy to attach, on the beam on the ceiling you cant even tell its rubber
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              Very useful
              Used this to hide seams on a faux ceiling beam. Gave it a great look. Saw some reviews that said it didn’t sit flush around the beam. In order to make it sit flush is to attach it on one side then stretch it around the beam to the other side. I used screws because I need to access one side panel where the ceiling fan remote antenna is located. I will conceal the screw heads so they can’t be seen. A little wood putty will do the job and I’ll be able to still get to the screw heads
              by
                • Recommended
                2 found this review helpful
                Rating provided by a verified purchaser...
                Rating provided by a verified purchaser
                by
                • Verified Purchase
                Rating provided by a verified purchaser...
                Rating provided by a verified purchaser
                by
                • Verified Purchase
                by
                • Verified Purchase
                I would give the finished look 5 stars. However,...
                I would give the finished look 5 stars. However, there are no directions on how to attached this is a beam. Fortunately, we were able to YouTube some videos and decided what would be best in our situation
                by
                • Verified Purchase
                Easy to install and looks just like railroad tie straps....
                Easy to install and looks just like railroad tie straps.
                by
                • Verified Purchase
                by
                • Verified Purchase
                Showing 1-10 of 41 reviews

                Frequently Bought Together

                Best Seller
                +
                +
                Price:
                $4351

                Compare Similar Braces

                current product
                Best Seller41 in. x 2-3/4 in. x 1/4 in. Double Rubber Strapping for Wood Faux Beam
                3 in. x 6 in. x 36 in. Standard Greensboro Architectural Grade PVC Rafter Tail Brace3 in. x 6 in. x 36 in. Mediterranean PVC Rafter Tail Brace3 in. x 6 in. x 36 in. Standard Huntington Architectural Grade PVC Rafter Tail Brace
                BrandAmerican Pro DecorEkena MillworkEkena MillworkEkena Millwork
                Name41 in. x 2-3/4 in. x 1/4 in. Double Rubber Strapping for Wood Faux Beam3 in. x 6 in. x 36 in. Standard Greensboro Architectural Grade PVC Rafter Tail Brace3 in. x 6 in. x 36 in. Mediterranean PVC Rafter Tail Brace3 in. x 6 in. x 36 in. Standard Huntington Architectural Grade PVC Rafter Tail Brace
                Price
                $4351
                $5485
                $5485
                $5485
                Ratings
                (41)
                (0)
                (0)
                (0)
                MaterialRubberPVCPVCPVC
                View ProductView ProductView ProductView Product