#1 Home Improvement Retailer

Internet # 301921332

Model # PXBEND34

Store SKU # 1002509034

Store SO SKU #1002483325

3/4 in. Plastic PEX-B Pipe 90-Degree Bend Support with Mounting Bracket

$3.53
  • Predrilled holes allow for securing to structure
  • Ideal for tight bends
  • For use with 3/4 in. PEX pipe
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The ApolloPEX 3/4 in. Plastic PEX Pipe 90 Bend Support with Mounting Bracket is simple to install and designed to provide a secure 90 support for stub-outs. Helps reduce added work by reducing the need for additional elbow fittings. The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

Highlights

  • Constructed of plastic for superior reliability, strength, durability and corrosion resistance
  • For use with 3/4 in. PEX tubing (sold separately)
  • Mounting bracket allows for securing to structural supports for stability
  • Design allows for tight radius while preventing kinks
  • Ideal for potable water and hydronic heating applications
  • Note: product may vary by store
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 301921332

Model # PXBEND34

Store SKU # 1002509034

Store SO SKU #1002483325

Additional Resources

Shop All Apollo

Specifications

Dimensions: H 6 in, W 6 in, D 1.24 in

Dimensions

Maximum compatible pipe size (in.)

0.75

Product Depth (in.)

1.24 in

Product Height (in.)

6 in

Product Width (in.)

6 in

Details

Accessory Type

Pipe Hanger

Compatible Pipe Material

PEX

Compatible Threaded Rod Size (in.)

0.75

Corrosion Resistant

Yes

Finish Family

Black

Maintenance, Repair & Supplies Product Type

Pipe Hangers & Supports

Material

Plastic

Minimum compatible pipe size (in.)

0.75

Pack Size

1

Pipe Hangers & Supports Type

Pipe Bend Support

Pipe or Fitting Product Type

Accessory

Product Weight (lb.)

0.15 lb

Quantity Per Package

1

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

5 Years: Must be installed per published installation instructions.

Questions & Answers

2Questions
caret
Q:If the minimum bend radius of 3/4" pex is 7" then why is the radius of this 6"?
by|May 17, 2024
0 Answer
Answer This Question
caret
Q:How does one install the pipe into the bracket? Does the pipe have to be warmed (heated) to make the bend? At room temp, the pipe either pops out of the bracket or breaks the bracket.
by|Jan 8, 2020
3 Answers
Answer This Question

A:  Heating the PEX will certainly make it easier to bend and conform to the bracket, but it is not required. My application required bending the tubing with a third dimensional route (i.e. not in one plane). This caused the tubing to slide out of the bracket. I used electrical tape at both ends to secure the tube.

by|Mar 4, 2024
    2 found this answer helpful

    A:  It is difficult to install 3/4" PEX in the bracket if you are in a tight space. Some very minor heating with a hair dryer made it much easier. I also added zip ties to ensure the PEX would not pop out.

    by|Mar 24, 2023

      A:  With a lot of luck!! Wouldn’t work for me, either!

      by|Mar 30, 2023
      Showing 1-2 of 2

      Customer Reviews

      2.9 out of 5

      • 2.9 out of 37 reviews
      • 23% recommend this product
      Filter by:
      Showing 1-10 of 37 reviews
      Tricky to insert pex-b in the bracket
      As another reviewer suggested, it's probably best to warm the tubing before attempting to insert it in the bracket. It was difficult to use because the tubing kept popping out of the first end while trying to insert it in the opposite. Make sure you bend the pipe while making it fit and avoid prying against the bracket to reduce the chance of breaking it. I had to use a zip tie to keep the first end from slipping out of the bracket while fitting, and then used a 2nd zip tie on the other end. It worked, but was more challenging than I expected. Next time I'll try the metal one.
      by
        2 found this review helpful
        by
        • Verified Purchase
        This worked exactly like it should and offered great support.
        by
        • Verified Purchase
        simple support that eliminates a hard 90 degree fitting
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        soon as I put on the pipe it craked
        by
        • Verified Purchase
        Literally broke in half from the tension of the pipe
        by
        • Verified Purchase
        The ends are not deep enough to hold the water line in place without something around each end. I ended up using zip ties
        by
        • Verified Purchase
        It worked after great difficulty to bend into place. I was not confident that it would stay in place so I used plastic tie-wraps to secure it in place. Seems to have worked.
        by
        • Verified Purchase
        Showing 1-10 of 37 reviews