800 Series 30 in. Undercabinet Range Hood with Lights in Stainless Steel

A:  EPaz, thank you for your question and interest in Model #DPH30652UC. Yes, with the addition of the Recirculation kit Model #DRZ3052UC. The Model #DRZ3052UC recirculation kit adds 4" to height of appliance.

A:  Firstly, look under the hood for a label near the light that specifies the max wattage and the bulb type. I have a Bosch hood with bulbs labeled ?2016 18CE?. The hood label says ?MAX 40W Type T8 or B10?.

A:  Hi Filo, thank you for your question. Those bulbs should be available at your local Home Depot store.

A:  Purchased E14 based bulb and it doesn?t fit.

A:  Hi Goodhall. Thank you for your question. Per the Use and Care Manual for Model #DPH30652UC here are the instructions on changing the lights: CAUTION: Before replace the lamps, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. Replace Lights: 1. Use a little flat blade screw driver or similar tool as a lever to remove the pin that fixes the light shield to the body of the hood , and remove it carefully from its housing. 2. Remove the damaged light (turn counter clockwise) and replace with a new 120 Volt, 40 Watt (maximum) olive shaped, made for a E14 base, suitable for use in open luminarie. NOTE: Turn off the lights and fan. Allow the lights to cool before handling. If new lights do not operate, be sure lights are inserted correctly before calling service. 1-800-944-2904

A:  Fangbing, Thank you for your question, the minimum CFM is 169 cfm's.