#1 Home Improvement Retailer

Internet # 204163385

Model # G2PS19X C1

Store SKU # 1000024073

1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

$11.44
Buy 20 or more $5.72 /unit
  • Controls water flow to household plumbing fixtures
  • For use with faucets, toilets, dishwashers and icemakers
  • Easy repair without shutting off water to your home
  • View More Details
Store
0 in stock
caret

Product Details

The 90 degree handle design on the BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Angle Valve allows you to stop the water flow leading to a plumbing fixture without disrupting the entire house flow. The Push Connect valve feature makes installation easy requiring no special tools, soldering or glue for a watertight seal. This angle valve is best used where the water pipe enters the room from the floor and on faucets, toilets, dishwashers, icemakers or washing machines.
  • Compatible with PEX, copper and CPVC
  • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle
  • Installation ready: requires no special tools, soldering or glue for a watertight seal
  • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use
  • Pre-inserted tube stiffener is "installation ready" for a faster connection
  • Easy-to-remove handle protects against accidental operation during rough-ins
  • Chrome-plated brass
  • Temperature rating: 40° to 160°F
  • Pressure rating: 125 psi maximum
  • No-lead certified
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

18Questions
caret
Q:I bought the push connect #74 and it leaked, badly. And now I can't get it off. I will have to cut another 2 inches off the pipe to remove the valve. There are A LOT of customers asking questions on your DIY Youtube videos, and are not very happy that no
by|Sep 4, 2023
0 Answer
Answer This Question
caret
Q:I installed the G2PS19X C1 with ease once the old valve was removed and pipe cleaned. However, the unit moves, spins AKA- NOT steadfast. Is This Normal? I noticed your videos also show Slight movement without addressing this important feature.
by|Sep 1, 2023
0 Answer
Answer This Question
caret
Q:Old one has a faro on the house pipe & the new has a plastic gray tube inside with ball bearings in side. How do I tighten the valve to pipe
by|Aug 7, 2023
1 Answer
Answer This Question

A:  Hello, Thank you for your question. We would require more information to determine if our Connector (or other product) is designed for that use. Please contact our Customer Support Team at 877-277-7755 and reference this review.

by|Aug 9, 2023
    caret
    Q:How is this push to connect compared to Sharkbite in terms of longevity?
    by|Mar 25, 2023
    1 Answer
    Answer This Question

    A:  Hello, Thank you for your question. We would require more information to determine if our Connector (or other product) is designed for that use. Please contact our Customer Support Team at 877-277-7755 and reference this review.

    by|Apr 9, 2023
      1 found this answer helpful
      Showing 1-4 of 18
      caret

      Customer Reviews

      4.7 out of 5
      (562)
      • 4.7
        out of 562 reviews
      • 97% recommend this product
      Filter by:
      Showing 1-10 of 562 reviews
      Doesn’t work
      Leaks every where. The first one I bought I thought was defective. By the third one, apparently this product is useless
      by
        Had to replace our homes original builder grade toilet water valve. It was that cheap plastic push pull valve they use. This was so easy to replace. Literally just push connects onto the CPVC water pipe. We bought a new threaded water hose as well.
        Works great for CPVC
        by
        • Verified Purchase
        • Recommended
        It will work fine if installed correctly.
        One of the picture reviews said that it leaked and a plumber had to cut off the wall covering so he could push it on farther. It leaked because it wasn’t pushed on far enough. There is a shark bite tool for deburring the pipe and also used as a gauge to mark the required depth. It’s also a good idea to clean the pipe well so the o-ring can seal well; get off any paint, etc. The deburring helps the O-ring from getting damaged.
        by
          • Recommended
          Stan is the man
          Went to our trusty Home Depot to fix a frozen shut off valve for the dish washer. Was trying to figure out what was needed. Stan to the rescue. He said all I needed is this valve and explained everthing to cut the old one off and put this one on. In less than 20 minutes done. No issues and no leaks. Every Home Depot needs to clone Stan. There were people waiting for his advice. He is polite , a gentleman and know his stuff.
          by
            • Recommended
            brass craft Nominal push connect inlet valve
            It was quick to install and works perfectly. The home depot representative Aron was very helpful, patient and very knowledgeable. I love Home Depot
            by
              • Recommended
              When I asked an associate at home depot to give me a shark bite valve they gave me this brand in ...
              When I asked an associate at home depot to give me a shark bite valve they gave me this brand in error. As soon as we installed it it leaked. We even called a plumber over to help us try to remove the valve and he used the valve release tool and it still would not come off. Fortunately the plumber was able to take off the plastic wall covering and pushed the valve back further on the pipe so that stopped the leak. I will never buy this brand again.
              by
              Response from BrassCraft MfgMay 18, 2020
              Hello CA2003

              We are sorry to hear of your experience with our valve. We would like to help you resolve your problem. Please call one of our Customer Service Representatives toll-free at 877-272-7755. Thank you for letting us know you had an issue. We look forward to assisting you.

              Thank you,
              Dale W.
              BrassCraft
              • Verified Purchase
              2 found this review helpful
              It’s easy to use even for a guy lLike me...
              It’s easy to use even for a guy lLike me who doesn’t know nothing about Plumping
              by
              • Verified Purchase
              1 found this review helpful
              BRASSCRAFT 1/2 IN. NOM PUSH CONNECT INLET X 3/8 IN. OD COMP OUTLET 1/4-TURN ANGLE STOP (5-PACK). ...
              BRASSCRAFT 1/2 IN. NOM PUSH CONNECT INLET X 3/8 IN. OD COMP OUTLET 1/4-TURN ANGLE STOP (5-PACK). These are right angle valves which we used when your water lines enter from a wall to service a sink or toilet. The push to connect saves time and installs very easy. The 1/4 turn feature I absolutely recommend, it definitely beats trying to turn old style valves on and off.
              by
              • Recommended
              If you've never tried these push to connect valves you are missing out on one of the greatest and...
              If you've never tried these push to connect valves you are missing out on one of the greatest and easiest plumbing installs. I've been using these types of fitting for years now and not once have I had any leaks or failures. BrassCraft is an exceptional company and I've been their products for years with zero problems. These 1/2 turn valves are great for toilet and sink water line installs. They are quality valves that are easy to install and un-install if needed. Simply push them onto PEX, Copper, or CPVC until you feel it bottom out and it's installed...it's that easy. Pick some of these up the next time you need a valve replacement, you'll be glad you did.
              by
              • Recommended
              Easy install and works as advertised but O-ring seal is questionable long term. This sharkbite c...
              Easy install and works as advertised but O-ring seal is questionable long term. This sharkbite competitor uses the same push to fit technology and the rest of the valve looks to be traditional BrassCraft quality…made in USA. It installed flawlessly and works well. But like the sharkbite competitor I have concerns that the seal relies on a rubber O-ring, which can dry out and crack over time. Meaning a potential leak. Of course that may be a decade, but not as bulletproof as a brass compression ring design. But these are amazingly convenient and probably worth the risk in areas where they are easily accessible. I also wish this contractor pack came with a disconnect clip used to disengage and remove the valve. About my rating: 5 stars – Exceeds all expectations. Better than the competition in all aspects, design, cost, operation, and support (A+). 4 stars – Nicely done. Better than the competition and solves the problem. (B) 3 stars – Works as expected. Has some shortcomings but gets the job done. Might be short in design, cost, longevity, or support. (C). 2 stars – Falls short of expectations and needs improvement. Pass and look elsewhere. (D) 1 star – Fails miserably. Does not get the job done, might even make things worse. Someone at the company should be fired. (F)
              by
              Showing 1-10 of 562 reviews

              Compare Similar Tub & Shower Valves

              Top Rated1/2 in. FIP Inlet x 3/8 in. Comp Outlet Multi Turn Angle Valve
              current product
              1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve
              1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression x 1/4 in. O.D. Compression Dual Outlet Multi-Turn Valve
              BrandBrassCraftBrassCraftBrassCraftBrassCraft
              Name1/2 in. FIP Inlet x 3/8 in. Comp Outlet Multi Turn Angle Valve1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression x 1/4 in. O.D. Compression Dual Outlet Multi-Turn Valve
              Price
              $994
              Buy 20 or more $4.97
              $1144
              Buy 20 or more $5.72
              $1784
              Buy 16 or more $8.92
              $1798
              Buy 16 or more $8.99
              Ratings
              (518)
              (561)
              (300)
              (105)
              ConnectionFIP x CompPTC x CompComp x Comp x CompComp x Comp x Comp
              MaterialBrassBrassBrassBrass
              Inlet Diameter (In.)1/21/21/21/2
              Outlet Diameter (In.)3/83/81/23/8
              Compatible Pipe MaterialGalvanized malleable ironCopperCopperCopper
              Maximum Working Temperature (F)160160140140
              Maximum Pressure (PSI)125125125125
              ApplicationWater SupplyPotable WaterPotable WaterPotable Water
              THD SO SKU 1000680119
              View ProductView ProductView ProductView Product