#1 Home Improvement Retailer

Internet #204163387

Model #G2PS14X C1

Store SKU #1000024072

1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

$972
  • Quarter turn operation enables swift ON/OFF operation
  • Removable handle prevents unintentional operation
  • Heavy-duty brass structure is resistant to corrosion
  • See More Details
Store
0 in stock
Text to Me

Frequently Bought Together

+
+
Price:
$972

Product Overview

BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
  • Compatible with PEX, copper and CPVC
  • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle
  • Installation ready: requires no special tools, soldering or glue for a watertight seal
  • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use
  • Pre-inserted tube stiffener is "installation ready" for a faster connection
  • Easy-to-remove handle protects against accidental operation during rough-ins
  • Chrome-plated brass
  • Temperature rating: 40° to 160°F
  • Pressure rating: 125 psi maximum
  • No-lead certified
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

Compare Similar Supply Stop Valves

Best Seller1/2 in. Compression Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve
current product
1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve
1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Angle Stop Valve1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Straight Stop Valve
BrandBrassCraftBrassCraftSharkBiteSharkBite
Name1/2 in. Compression Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Angle Stop Valve1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Straight Stop Valve
Price
$897
Buy 20 or more $4.49
$972
$1097
Buy 12 or more $6.58
$1269
Ratings
(1245)
(196)
(736)
(631)
ConnectionComp x CompPTC x CompPTC x CompPTC x Comp
MaterialBrassBrassBrassBrass
Valve ConfigurationAngleStraightAngleStraight
Inlet Diameter (In.)1/21/21/21/2
Compatible Pipe MaterialCopperCopperMulti-PurposeMulti-Purpose
Outlet Diameter (In.)3/83/83/83/8
ApplicationPotable WaterPotable WaterPotable WaterPotable Water
Maximum Pressure (psi)125125200200
View ProductView ProductView ProductView Product

Specifications

Dimensions

Inlet Diameter (In.)
1/2
Inlet Size
1/2 In.
Outlet Diameter (In.)
3/8
Product Depth (in.)
2.7500
Product Height (in.)
1.48 in
Product Length (in.)
2.25
Product Width (in.)
1.19
Valve Inlet Diameter (in.)
1/2

Details

Application
Potable Water
Color/Finish
Chrome Finish
Color/Finish Family
Brass
Compatible Pipe Material
Copper
Compatible Product
Faucet,Ice Maker,Other
Connection
PTC x Comp
Features
Lead Free
Indoor/Outdoor
Indoor,Outdoor
Inlet Fitting End Type
Push to Connect
Material
Brass
Maximum Pressure (psi)
125
Maximum Working Temperature (F)
140
Outlet Fitting End Type
Compression
Pack Size
1
Product Weight (lb.)
0.259
Returnable
90-Day
Stop Valve Type
Straight
Valve Configuration
Straight
Valve Connection
Push Connect
Valve Type
Stop

Warranty / Certifications

Manufacturer Warranty
Limited Manufacturer Warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.7
    out of 219 reviews
  • 93% recommend this product
Filter by:
Showing 1-10 of 219 reviews
Feels very solid and will replace the old corroded handle perfectly. Our supply lines to the rest...
Feels very solid and will replace the old corroded handle perfectly. Our supply lines to the restroom faucets are soldered on to the old, builder-grade valves. I'll have to wait until I order new faucets and supply lines before I can install these valves. After reviewing a couple how-to videos, it looks reasonably simple to remove the old compression valves and slide this new one on. Photos show our old valves with a broken knob and severe corrosion on the hot-water valve. I'll add a second review when I've completed the project since it's gotten a bit more involved than my initial expectation. We'll want to do it right.
by rookie
  • Recommended Product
I had to clean out a very small, very dark cabinet under a bar sink tucked under some stairs in m...
I had to clean out a very small, very dark cabinet under a bar sink tucked under some stairs in my house. To my distress, I found that a near 40 year old angle valve for the hot water line had been slowly leaking from the stem and slowly destroying the mdf cabinet wall and floor. Why oh why do we allow mdf cabinet construction at all where the cabinet will be used in a "wet" configuration? It's considered wise to use 1/4 turn valves these days. In the past, I have left the old valve in place and and repacked the stem with plumbing pack. But, on this tiny 1/2" x 1/4" valve that just wasn't going to cut it. And, the 1/4 turn valves are less prone to leaks and much easier to operate even after years of service. I was anxious to try the latest push connect product from BrassCraft because this particular installation was only inches from the sidewall of the cabinet and I knew it would be contentious to be manipulating two large wrenches in there simultaneously trying to get a compression ferrule leak free tight. The only tough part of this job was removing the 40 year old ferrules that were crushed into the copper pipe. As is the common case, there wasn't enough existing pipe length to allow me to cut the pipe behind the ferrules. There are several methods of removing stubborn ferrules like this and I chose to use my rotary tool with a metal cutoff wheel because it was handy. It worked quickly and easily. The only trick was to ensure that the slot I cut into the ferrules didn't extend into the pipe underneath. The small rotary tool makes this easy. After removing the ferrules and cleaning up the copper pipes, installing the Brasscraft push connect was as easy as pushing it on snugly and then lining up the feed tube and wrenching the nut down over the new ferrule connecting the supply line to the faucet. This whole job took maybe 1/2 hour if you don't count the two days delay required to exchange the 1/4" valve I bought at first for the necessary 3/8" one I should have gotten. What was I thinking? :-( This Brasscraft valve is very well made, easy to install and actually very nice looking. Especially compared to the old brass valves that are used throughout my house. Be aware that, in my experience at HD, these lovely Brasscraft valves are kept separately and away from similar valves that are in the copper fitting bay on the plumbing aisle. The Brasscrafts are kept near the faucets by themselves. with other nice looking Brasscraft items like braided connectors and faucet repair parts. One needs to pay attention to the aisle and bay listing on the website or identify this product by brand name to the HD associate lest one end up with a competitor's "push connect" angle valve that isn't nearly as nice looking. Now that I've done this one, I'm probably going to do all the angle valves - toilets, sinks and washing machine in my house to avoid future difficulties if I need to turn them off and damage from leaks.
by tjh
  • Recommended Product
1 person found this helpful
Works every single time without question. I've installed hundreds of them in as I'm a Lead Abatem...
Works every single time without question. I've installed hundreds of them in as I'm a Lead Abatement Supervisor. Fully reusable and easy to remove. I just installed a pair in my own kitchen.
by Will
  • Verified Purchase
  • Recommended Product
Fits just right and so easy to install.
Fits just right and so easy to install.
by
  • Verified Purchase
  • Recommended Product
Works as intended. Easy, fast, and dependable.
Works as intended. Easy, fast, and dependable.
by Easy
  • Verified Purchase
  • Recommended Product
Brass craft Great merchandise...
Brass craft Great merchandise
by HomeDepotCustomer
    by Great
      Make the job fast and easy....
      Make the job fast and easy.
      by Gene
        by HomeDepotCustomer
          Great 1/4 turn shutoff
          Bought 2 of these for the kitchen sink about a month ago. They were easy to put on (push-to-connect) & there have been no leaks. Make sure you do it the right way though (even cut on existing pipe, clean/deburr, etc. Will probably purchase again when I need to re-do the ones in some of the bathrooms.
          by Kody
          • DIY
          • Recommended Product
          Showing 1-10 of 219 reviews