3/8 in. x 3/8 in. x 3/8 in. Compression x Compression Brass T-Fitting
- Provides a dual outlet for a water supply valve
- Allows two supply line to be connected to the fitting
- Constructed from solid brass for a long-lasting use
- See More Details
Frequently Bought Together
Price:
$598
Product Overview
This BrassCraft 3/8 in. x 3/8 in. x 3/8 in. Brass Compression X Compression T-fitting provides a dual outlet for a water supply valve allowing 2 supply lines to be connected.
- Machined from solid brass
- Adds another outlet to a water supply valve providing dual outlet capabilities so that two supply lines can be connected to the valve
- Compression connections
- 125 psi maximum working pressure
- Compliant to section ab1953/5152 of the California and Vermont legislation effective January 2010
- California residents
Info & Guides
Product Overview
- Provides a dual outlet for a water supply valve
- Allows two supply line to be connected to the fitting
- Constructed from solid brass for a long-lasting use
Compare Similar Brass Fittings
|  |  |  | |
| Brand | BrassCraft | THEWORKS | Homewerks Worldwide | SharkBite |
| Name | 3/8 in. x 3/8 in. x 3/8 in. Compression x Compression Brass T-Fitting | 3/8 in. x 3/8 in. x 3/8 in. Compression Brass Stop Valve Tee Adapter | 1/2 in. x 1/2 in. x 1/4 in. Brass Extender Tee Carded | 1/2 in. Push-to-Connect Brass Tee Fitting |
| Price | $598 | $779 | $798 | $1316 |
| Ratings | (304) | (3) | (11) | (570) |
| Fitting 1 size | 3/8" | 3/8" | 1/2" | 1/2" |
| Fitting or Connector Type | Tee | Adapter | Tee | Tee |
| Connectivity | Compression | Compression | Compression | Push Fit |
| Features | Lead Free | No Additional Special Features | Lead Free,Threaded | Removable |
| Application | Potable Water | Refrigeration | Potable Water,Rough-In valve,Water Supply | Potable Water |
| Pack Size | 1 | 1 | 1 | 1 |
| Material | Brass | Brass | Brass | Brass |
| View Product | View Product | View Product | View Product |
Compare Similar Brass Fittings
| | | | |
| Brand | BrassCraft | THEWORKS | Homewerks Worldwide | SharkBite |
| Name | 3/8 in. x 3/8 in. x 3/8 in. Compression x Compression Brass T-Fitting | 3/8 in. x 3/8 in. x 3/8 in. Compression Brass Stop Valve Tee Adapter | 1/2 in. x 1/2 in. x 1/4 in. Brass Extender Tee Carded | 1/2 in. Push-to-Connect Brass Tee Fitting |
| Price | $598 | $779 | $798 | $1316 |
| Ratings | (304) | (3) | (11) | (570) |
| Fitting 1 size | ||||
| Fitting or Connector Type | ||||
| Connectivity | ||||
| Features | ||||
| Application | ||||
| Pack Size | ||||
| Material | ||||
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Fitting 1 size
3/8"
Fitting 2 size
3/8"
Fitting 3 size
3/8"
Product Height (in.)
2.000
Product Width (in.)
3.5
Triple Fitting Size
3/8" x 3/8" x 3/8"
Details
Application
Potable Water
Color Family
Brass
Color/Finish
Brass
Compatible Pipe Material
Brass
Connection 1
OD
Connection 2
OD
Connection 3
Female Comp
Connectivity
Compression
Features
Lead Free
Fitting or Connector Type
Tee
Fitting/ Connector Collection
Brass
Material
Brass
Maximum working pressure (psi)
125
Maximum Working Temperature (F)
250
Pack Size
1
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
.16201
Reducing Fitting
No
Returnable
180-Day
Warranty / Certifications
Manufacturer Warranty
LIMITED MANUFACTURER WARRANTY. See BrassCraft.com
Questions & Answers
38Questions32Answers
Can I use this as a Bidet Adapter?
Asked by BryD December 30, 20203
AnswersNot sure what a bidet is but this adapter is for splitting up one 3/8 line and making it two
Can I use this as a Bidet adapter?
Asked by BryD December 30, 20201
AnswerYes this could work for that
I see everyone is using plastics, will copper work on the 1/4" compression?
Asked by cw September 21, 20203
AnswersHello CW - Thank you for your question. Designed for use with aluminum and copper tubing. Not recommended for steel tubing. If you need additional support, please contact one of our Customer Service Representatives at 877-272-7755.
Can I connect a second t-fitting to this in order to split the water 3 ways? I'd like to connect ...
Asked by Ja August 25, 20204
AnswersYes
Does a similar product exist in 3/4"?
Asked by Pearl June 4, 20201
AnswerThank you for your question. No, we don't have this Compression Tees in 3/4 in. If you have any questions on our products or need assistance in selection, please contact one of our Customer Support Representatives at 877-272-7755.
Is this item nsf 61 certified?
Asked by Amir May 21, 20202
AnswersHi Amir, No, this fitting is not certified to NSF61, They are NSF 372 and are consistent with the safe drinking water act If you have any further questions, please call one of our Customer Service Representatives toll-free at 877-272-7755.
Can this be used to hook up to your washing machine water line, then connect washing machine hose...
Asked by Curious May 5, 20204
AnswersYes, We had not other choice but it worked perfectly until we moved year and a half later.
Is this product leas free?
Asked by Scott April 12, 20204
AnswersCome on now! You can read can't you! Do they use Lead to make Brass,
Can this be used to split gas for stove and gas dryer .
Asked by James March 31, 20205
AnswersNo, this is for water, not gas
Is this ok to use on a chrome plated water supply valve?
Asked by cjc March 2, 20205
AnswersYes
Customer Reviews
Jan 13, 2021
I needed to connect a Pur water filter from my main line under the sink to their provided hose. ...
I needed to connect a Pur water filter from my main line under the sink to their provided hose. The filter came with an adapter, but it was set up for 1/2 inch to 3/8 inch with the barb coming out and I needed 3/8 inch to 3/8. I had to piece together my set up and this was one of the pieces I used. I applied teflon tape to the threads for a more sure fit. This piece connected to a female to female adapter and then to the barbed connector for the hose. It has been installed for a couple of weeks and there hasn't been a single issue and I don't forsee any either.
On a side note, the plumbing specialist at my home depot helped me pick out the pieces I would need and even opened up the packages to check the fit in store. The main thing we were both worried about was the seating of the seals, but he went above and beyond to make sure that everything would fit before I ever left the store.
by dnathan13
Dec 9, 2020
Great fitting for creating two 3/8" outlets on your hot/cold line.
I installed one of these for an under sink water purifier; one cold line to the sink and another to the purifier. Very easy to install with a small wrench and has lasted fine for several years. This is a very handy fitting if you do not want to install a water valve with a double outlet.
by SteveVA
Jul 24, 2020
Be sure you know what you need
I gave this 2 stars only so this wouldn’t get lost in the many 5 star reviews. This is a good product if you have a valve that connects directly to a 3/8 compression line and you need to connect two 3:8 compression lines to the valve. One leg of this tee connects directly to the valve and the other two legs connect to the two compression lines. The description says that if you pay attention. If you need to join THREE compression lines this is NOT the tee you need
by JimH
Response from BrassCraft MfgJul 27, 2020
We are sorry to hear of your experience with our compression tee fitting. We would like to help you resolve your problem. Please call one of our Customer Service Representatives toll-free at 877-272-7755. Thank you for letting us know you had an issue. We look forward to assisting you.
Jun 2, 2020
This was a key part for me as I looked to install my refrigerator ice/water line. It was a tough...
This was a key part for me as I looked to install my refrigerator ice/water line. It was a tough find at the other place, but Home Depot had it in stock. I ordered online and it was ready for pick up in the locker within 24 hours. I really like this service instead of walking up and down the aisles to find the right part.
by D15
May 13, 2020
When I changed out my kitchen faucet I also changed out the supply valves to quarter turn valves ...
When I changed out my kitchen faucet I also changed out the supply valves to quarter turn valves but you can’t get a dual outlet supply valves that are quarter turn but with these T fittings solved this issue. Each supply line under my kitchen sink valve required a T fitting, both hot and cold supplied the kitchen faucet obviously but in addition the hot side also supplies my dishwasher and the cold side supplies my RO system. The T fittings where the best option to accommodate everything I need under the sink without getting overly creative. Overall very happy to find these fittings and made my installation easy. The fittings are well made and the female connection has a rubber seal which is great because you don’t need Teflon tape to make it water tight. Also the female connection makes it easy to rotate the fitting where you need it too.
by Josh
Apr 30, 2020
This is a must have for every plumber and DIY’er. I used these to install a new bathroom vanity w...
This is a must have for every plumber and DIY’er. I used these to install a new bathroom vanity with dual sinks and faucets, and these were a perfect fit to install my water lines with shut-off valves. Great product and quality part. I recommend to always have a few of these on hand for those needed home repairs under the sink.
by House
Apr 22, 2020
This is easy leak free way to add an additional fixture to a shutoff valve. The Brasscraft T-fitt...
This is easy leak free way to add an additional fixture to a shutoff valve. The Brasscraft T-fitting is made of brass, with quality construction and uses compression style 3/8" fittings. No ferrules or nuts come with this fitting, but it fits perfectly with 3/8 plumbing hoses. I used this to have 2 fixtures on a double sink bathroom vanity. The connecting nut swivels, so the Tee portion of the valve can be tightened to be oriented in any position, which is great for areas with little clearance. I used plumbers tape, but it is not needed. They also make a different style that uses a 1/4" fitting used for adding ice makers to a kitchen. Made in the USA.
by TOM
Nov 5, 2019
Installing a new kitchen faucet and was really surprised on how my water filter system was instal...
Installing a new kitchen faucet and was really surprised on how my water filter system was installed, a spike system. I took off to my local Home Depot store and they showed me this, what I needed to use with this and how to put it all together. Fit like a glove, no leaks and my system is working better than ever. Perfect item for the job.
by txgent10
Related Products
Explore More on homedepot.com
Kitchen Design and Remodel
Outdoor Living
Bathroom
Storage and Cleaning Supplies
Tools and Hardware