EdgeClip Hidden Deck Fastener (450-Count)

The ArmorGuard EDGE Clip made with CAMO innovation is the strongest, fastest, hidden deck clip available, making grooved decking installs on wood joists easy for everyone. The universal hidden deck clip is approved for use with all leading composite, PVC, capped composite, and hardwood grooved boards. ArmorGuard EDGE Clips offer superior strength and holding power thanks to their Stainless Steel screw and gusset. The 2-1/4 in. x #7 screw buries down deeply into the joist while the gusset fits into the groove of the board, securing it down when the screw is fastened. In an independent test, ArmorGuard EDGE Clips were up to 88% stronger than other clips in reducing lateral movement, which will give you confidence in the long-evity of the install. Industry-leading strength meets the easiest install experience with ArmorGuard EDGE Clips. Each clip comes fully assembled with a plastic spacer that grips the joist and creates a 3/16 in. gap to allow for proper airflow and drainage. In addition, the fastener stays in place with no partial installation, so you can lay your field of deck boards before fastening, saving even more time. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill-not an impact driver-during install.|2|||0

The CAMO Wedge clip can be installed on any board, at any angle, in any environment. The Wedge clip is approved for use for any grooved composite, PVC, and hardwood deck boards. Installation is flexible and easy. Able to be screwed in 90-degree, diagonal, or herringbone patterns, simply set the clip in the groove of the board until you're ready to fasten. No partial installation required. The 316 stainless steel gusset and 316 stainless steel screw offer superior corrosion resistance and holding power, while the nylon plastic spacer body creates an automatic 3/16 in spacing between boards, allowing for proper airflow and drainage. When you're ready to fasten, speed up the job with the NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill-not an impact driver-during install.

The CAMO Wedge clip can be installed on any board, at any angle, in any environment. The Wedge clip is approved for use for any grooved composite, PVC, and hardwood deck boards. Installation is flexible and easy. Able to be screwed in 90-degree, diagonal, or herringbone patterns, simply set the clip in the groove of the board until you're ready to fasten. No partial installation required. The 316 stainless steel gusset and 316 stainless steel screw offer superior corrosion resistance and holding power, while the nylon plastic spacer body creates an automatic 3/16 in spacing between boards, allowing for proper airflow and drainage. When you're ready to fasten, speed up the job with the NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill-not an impact driver-during install.

EdgeClips are up to 88% stronger than leading deck board manufacturer's clips in lateral movement tests. For the fastest and easiest installation, secure EdgeClips with the CAMO DRIVE tool and Clip Guide. The industry-changing DRIVE attaches to your drill, gets you off your knees and is the most affordable stand-up tool on the market.