JETCOAT 60 in. L x 30 in. W x 78 in. H Left Drain Alcove Shower Stall Kit in Carrara White and Brushed Nickel 3-Piece
- Easy to install, grout-free solution
- High-gloss acrylic base ensures durability
- H2OFF clean glass technology for low maintenance
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
Update your bathroom with the JETCOAT Shower Wall Kit, complete with JETCOAT shower walls, a white acrylic shower base and Marina Roller shower door. Easy to install, the JETCOAT Shower Wall System is a Grout-Free Solution that can be installed over waterproof backer board or existing tile. It only takes a few hours to measure, cut, and adhere to the wall, which makes this a perfect DIY project for most. The Marina Roller doors are constructed with 3/8 in. thick glass and prominent rollers that easily glide across a fully frameless design. H2OFF Clean Glass Technology is applied to the inside surface of the glass, providing a water repellant and stain resistant coating for superior protection and easy maintenance. Shower bases are made of high gloss white acrylic, making them easy to clean, and resistant to scratches and stains. The low, easy to step over threshold base comes standard with a slip resistant floor. Shower bases are easy to install, and when paired with the beautiful JETCOAT Wall System, you will never find an easier or more affordable way to give your bath the stylish and dramatic makeover you have been dreaming of.
Highlights
- Shower wall kit includes 2-side panels measuring 32 in. W x 78 in. H and 3-back panels with finished measurements of 60 in. W x 78 in. H
- Shower walls can be cut to fit around a shower or bathtub configuration
- Shower walls can be installed over waterproof backer board or tile
- Grout-free solution, allowing you to have the look of tile without messy clean-up
- Wall side panels are designed with a beveled edge, providing a clean finish to the outer edge
- Provided 2-edge and 2-internal corner trim pieces are optional for use
- High gloss shower base features durable acrylic with MDF and fiberglass for maximum support
- 60 in. L x 30 in. W base has a 2-5/8 in. low threshold for easy shower entrance and exit
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Additional Resources
Shop All CRAFT + MAINSpecifications
Dimensions
Base Height (in.) | 2.625 |
|---|---|
Base Length (in.) | 60 |
Base Width (in.) | 30 |
Door Glass Thickness (in.) | 3/8" |
Door Height (in.) | 76 |
Door Width (in.) | 60 |
Fits Finished Width (in.) | 60 in |
Overall Product Height (in.) | 80.625 |
Threshold Height (in.) | 2.625 |
Walk Through Opening Height (in.) | 72 in |
Walk Through Opening Width (in.) | 24 in. - 28 in. |
Wall Height (in.) | 78 |
Wall Width (in.) | 60 |
Details
Approximate Length x Width | 60 x 30 |
|---|---|
Color Family | White |
Color/Finish | Carrara White |
Door Type | Sliding |
Drain Location | Left |
Features | Coated Glass, Exposed Rollers, Low Profile, Rolling, Slip Resistant Floor |
Frame Finish | Brushed Nickel |
Frame Type | Frameless |
Glass Finish | Clear |
Glass Texture | Clear |
Handle Finish | Brushed Nickel |
Included | Door Hardware, Frame Hardware, Mounting Hardware |
Installation Type | Rectangular |
Material | Composite |
Number of Shower Pieces | 3 Pieces |
Product Weight (lb.) | 308 lb |
Returnable | 90-Day |
Shower Kit Type | Base/Wall/Door |
Shower Type | Alcove |
Wall Installation Type | Glue Up |
Warranty / Certifications
Certifications and Listings | ANSI Compliant, CSA Listed |
|---|---|
Manufacturer Warranty | 5-Year Consumer and 2-Year Commercial Limited Warranty |
Questions & Answers
Can wall be applied over drywall
drain location on a left drain shower pan, for rough in pipe location
Thank you for yoru interest in JETCOAT. The rough-in drain center is 8-1/4" from the end wall studs and 15" from the back wall studs.
Can the shower door be installed to open from the right side
Thank you for your interest in Jetcoat. This shower door can be installed to open on the right or left right out of the box.
Can ADA handles be added to enclosure?
Thank you for your interest in Craft + Main shower kits. We do not offer kit customization or ADA grab bars. However, the Jetcoat wall panels can be cut or drilled into quite easily after installation so you can add the 3rd party grab bars of your choice simply by following the manufacturers instructions. Note: Please read the grab bar installation instructions carefully before starting your project as it may require specific wall stud placement to insure proper anchorage.
The door keeps sliding open. Is there a way to adjust the rollers or any other part to stop it?
It sounds as if something is not plumb or level. This quite common in older homes. The roller adjustment instructions in Step #19 of the installation manual can be used to adjust the rollers for an out of level top rail. If you require further assistance with this issue, please contact our product support team at 888-620-3667.
Is the floor pan a mortar free base? Are there any certain requirements to install it?
Thank you for your interest in Jetcoat. The base is designed to be attached to the subfloor with construction adhesive. If you wish to use a mortar bed, that is perfectly acceptable as well. This base is designed to be installed directly to the studs, with the Jetcoat walls glues to backerboard above the base.
My shower length is 59 inches. Can the base be cut to accommodate the 59 inches?
Thank you for your interest in Jetcoat. The base can not be cut down. However, this base is designed to be installed directly to the studs with the walls mounted on backer board above the base. If your finished wall width is 59", it is likely your studs are placed at 60" already. Unfortunately, the only way to be sure is to cut the wallboard back and measure the distance between the studs. if the opening is larger than 60 1/8" or smaller than 59 7/8", this base will not work unless the walls are demolished and the opening re-framed.
What is the weight limit of the drain pan?
Thank you for your interest in Jetcoat. The shower pan has been successfully tested up to 350 pounds.
Thank you for your interest in Jetcoat. This base has been successfully tested up to 350 pounds.
Viewing 1-8 of 16
Customer Reviews
4.2 out of 5
Loading Recommendations
Compare Key Features
Product Snapshot | ||
|---|---|---|
Perfect for upgrading your bathroom with a grout-free shower wall system, adding style and easy maintenance. | Perfect for upgrading your bathroom with a grout-free shower wall system, adding style and easy maintenance. | Perfect for upgrading your bathroom with a durable, grout-free shower, adding style and functionality. |
Dimensions/Capacity | ||
60 in. L x 30 in. W x 78 in. H | 60 in. L x 30 in. W x 78 in. H | 60 in. L x 32 in. W x 84 in. H |
Material | ||
Acrylic, MDF, Fiberglass, Tempered Glass | Acrylic, MDF, Fiberglass, Tempered Glass | Composite stone |
Built-in Storage Solutions | ||
Waterproofing Technology | ||
Shower Door Type | ||
Sliding | Sliding |
Related Products
Carrara 32 in. x 60 in. x 84 in. Solid Composite Stone Alcove Shower Kit with Walls and Graphite Pan Base L/R Drain
Transform your bathroom with the CASTICO Alcove Shower Kit, expertly crafted from Solid Composite Stone for durability, style, and efficiency. Every CASTICO product is built to last and backed by a limited lifetime warranty for added confidence. This kit features a pre-sloped, slip-resistant solid composite stone shower base paired with beautifully finished, grout-free wall panels that resist stains and scratches. The walls panels are simple to install and can be cut to fit around niches and windows. The curb-less, low-step base and seamless design deliver modern elegance and accessibility, making it an ideal choice for both contractors and DIY enthusiasts
JETCOAT 60 in. L x 30 in. W x 78 in. H Right Drain Alcove Shower Stall Kit in Carrara White and Brushed Nickel 3-Piece
Update your bathroom with the JETCOAT Shower Wall Kit, complete with JETCOAT shower walls, a white acrylic shower base and Marina Roller shower door. Easy to install, the JETCOAT Shower Wall System is a Grout-Free Solution that can be installed over waterproof backer board or existing tile. It only takes a few hours to measure, cut, and adhere to the wall, which makes this a perfect DIY project for most. The Marina Roller doors are constructed with 3/8 in. thick glass and prominent rollers that easily glide across a fully frameless design. H2OFF Clean Glass Technology is applied to the inside surface of the glass, providing a water repellant and stain resistant coating for superior protection and easy maintenance. Shower bases are made of high gloss white acrylic, making them easy to clean, and resistant to scratches and stains. The low, easy to step over threshold base comes standard with a slip resistant floor. Shower bases are easy to install, and when paired with the beautiful JETCOAT Wall System, you will never find an easier or more affordable way to give your bath the stylish and dramatic makeover you've been dreaming of.
