![]() | ![]() | ![]() | ![]() | |
Brand | Charlotte Pipe | Charlotte Pipe | Charlotte Pipe | Charlotte Pipe |
Name | 1-1/2 in. PVC Schedule 40 S x S Coupling | 1-1/2 in. PVC Schedule 40 Socket Cap | 1-1/2 in. PVC Schedule. 40 45-Degree S x S Elbow Fitting | 1-1/2 in. PVC Schedule. 40 90-Degree S x S Elbow Fitting |
Price | $100 | $120 | $188 | $195 |
Ratings | (252) | (120) | (34) | (209) |
Fitting 1 size | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" |
Fitting or Connector Type | Coupling | Cap | Elbow | Elbow |
Schedule Type | Schedule 40 | Schedule 40 | Schedule 40 | Schedule 40 |
Pack Size | 1 | 1 | 1 | 1 |
Application | Non-Potable Water | Non-Potable Water | Non-Potable Water | Non-Potable Water |
DWV | Pressure | Pressure | Pressure | Pressure |
Connectivity | Solvent Cemented | Solvent Cemented | Solvent Cemented | Solvent Cemented |
Features | Underground Use | Underground Use | Underground Use | Underground Use |
Bend Degree | 45 Degree | 90 Degree | ||
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Charlotte Pipe | Charlotte Pipe | Charlotte Pipe | Charlotte Pipe |
Name | 1-1/2 in. PVC Schedule 40 S x S Coupling | 1-1/2 in. PVC Schedule 40 Socket Cap | 1-1/2 in. PVC Schedule. 40 45-Degree S x S Elbow Fitting | 1-1/2 in. PVC Schedule. 40 90-Degree S x S Elbow Fitting |
Price | $100 | $120 | $188 | $195 |
Ratings | (252) | (120) | (34) | (209) |
Fitting 1 size | ||||
Fitting or Connector Type | ||||
Schedule Type | ||||
Pack Size | ||||
Application | ||||
DWV | ||||
Connectivity | ||||
Features | ||||
Bend Degree | ||||
View Product | View Product | View Product | View Product |
2" PVC pipe and fittings have an OD of +/- 2.375 inches and a ID of +/- 2.067 inches.
Yes. This fitting is typically used in pressure applications to join 3/4" PVC pipe.
A coupling is basically two DWV fitting hubs separated by a center stop in the middle of the fitting. Fitting hubs are tapered and the bottom of the hub will have a smaller inside diameter than the hub entrance. For a better explanation and for our recommendations, please contact our Technical Services Department at 800-438-6091.
This fitting is designed to terminate a variety of PVC SCH 40 pressure systems. Its use can suitability will depend on many factors. Please contact our Technical Services Department for specific application inquiries at 800-438-6091.
For our recommendations, please contact our Technical Services Department at 800-438-6091.
a 1" coupling should in fact join two 1" pieces of pipe. For a better explanation and for our recommendations, please contact our Technical Services Department at 800-438-6091.
this item only comes in white.
scedul 40
You can find nipples in some sizes, but your best bet and cheapest alternative is to buy one 10 ft section of 1/2 inch Pvc pipe and cut the short pieces you need. That will be cheaper and allow you to size each piece to your actual need.
the OD is +/- 1.380 inches. Charlotte Pipe products are designed for plumbing applications only. For additional information please contact our Technical Services Department at 800-438-6091.