#1 Home Improvement Retailer

Internet #207004081

Model #3646

1/4 in. x 2 ft. x 8 ft. PureBond Red Oak 1-1/2 in. Beaded Plywood Project Panel

$6446
  • Free custom cut available - See details below
  • The look of tongue and groove from a single sheet of plywood
  • Soy-based PureBond adhesive is formaldehyde-free
  • View More Details

Frequently Bought Together

+
Price:
$6446

Product Overview

Beaded groove pattern creates the character and unique appearance of tongue and groove construction. MDF core material ensures consistent bead depth profile across panel. Beaded Panels can be used for wall paneling, wainscoting, cabinet doors and cabinet backers or anywhere you wish to replicate the tongue and groove appearance of fine woodwork. Panels feature a machined 1-1/2 in. on-center beaded groove pattern. The cutting heads are calibrated to ensure pattern uniformity across the entire sheet for a convincing illusion of tongue and groove woodwork that matches any existing species used. Since beaded panels are unfinished, close color matching with existing molding and millwork is possible. You can finish them or use them in painted applications.
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • Decorative top veneer, measuring approximately 1/42 in. thick, exhibits the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/4 in. x 2 ft. x 8 ft.; actual: 0.203 in. x 24 in. x 96 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 11 lbs.
  • Grade: B-4
  • 1-1/2 in. On-center beaded groove pattern
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Project Panels

current product
1/4 in. x 2 ft. x 8 ft. PureBond Red Oak 1-1/2 in. Beaded Plywood Project Panel
1/4 in. x 2 ft. x 8 ft. 2-Sided PureBond Cherry Plywood Project Panel1/4 in. x 2 ft. x 8 ft. 2-Sided PureBond Mahogany Plywood Project Panel1/4 in. x 2 ft. x 8 ft. PureBond Mahogany Plywood Project Panel (Free Custom Cut Available)
BrandColumbia Forest ProductsColumbia Forest ProductsColumbia Forest ProductsColumbia Forest Products
Name1/4 in. x 2 ft. x 8 ft. PureBond Red Oak 1-1/2 in. Beaded Plywood Project Panel1/4 in. x 2 ft. x 8 ft. 2-Sided PureBond Cherry Plywood Project Panel1/4 in. x 2 ft. x 8 ft. 2-Sided PureBond Mahogany Plywood Project Panel1/4 in. x 2 ft. x 8 ft. PureBond Mahogany Plywood Project Panel (Free Custom Cut Available)
Price
$6446
$7369
$7413
$8236
Ratings
(106)
(19)
(2)
(195)
Nominal Product Thickness (in.)1/41/41/41/4
Nominal Product Width (ft.)2222
Nominal Product Length (ft.)8888
Plywood FeaturesStainableStainableStainableStainable
Weather ExposureInteriorInteriorInteriorInterior
Engineered Wood TypeHardwood PlywoodHardwood PlywoodHardwood PlywoodHardwood Plywood
View ProductView ProductView ProductView Product

Specifications

Dimensions

Actual Product Length (in.)
96.000
Actual Product Thickness (in.)
.203
Actual Product Width (in.)
24
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
1/4
Nominal Product Width (ft.)
2

Details

Engineered Wood Type
Hardwood Plywood
Plywood Features
Stainable
Returnable
90-Day
Shape
Square
Span Rating
Not Applicable
Weather Exposure
Interior

Warranty / Certifications

Manufacturer Warranty
Product warranted against glue or bond failure. Product replacement provided.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.4
    out of 106 reviews
  • 90% recommend this product
Filter by:
Showing 1-10 of 106 reviews
We used the panel for the surface of kitchen cabinets....
We used the panel for the surface of kitchen cabinets. We sealed it with cherry wood stain and was surprised to see the grains stand out of the background. Initially, we were disappointed and ready to order another piece of different wood so that it will appear uniform after staining. However, after reviewing it, we found it actually looks unique and artsy and decided to keep it.
by
  • Verified Purchase
Looks amazing....
Looks amazing.
by
  • Verified Purchase
When compared to the Beaded Ann Arbor Birch panels I have been getting, (Which are finished and r...
When compared to the Beaded Ann Arbor Birch panels I have been getting, (Which are finished and ready to install) this was a cheap imitation that cost more... Very disappointed. Would not buy again...
by
Response from CFP Customer ServiceDec 28, 2020
I apologize for the issues you had with our product. I would like to discuss this with you and see what we can do to make it right. Please contact me at mhale@cfpwood.com or 336-291-5869. Thank you -- Michael
  • Verified Purchase
Nice panels but too bad they discontinued the 3' on center panels
Started remodeling my kitchen, used the 3" on center bead board that Home Depot USED TO CARRY. Now they are discontinued and am now 5 boards short from finishing my cabinet doors. Very disappointed that they no longer carry that product, only the 1 1/2" on center boards. I have no other reasonable alternative and unfinished kitchen cabinet doors. Very unhappy with Home Depot.
by
    • Recommended
    I used this product to cover up the balusters on our stairs. The 1/4" thickness was perfect to m...
    I used this product to cover up the balusters on our stairs. The 1/4" thickness was perfect to match up with the top rail and base rail. The only problem is that the groves are not perfectly in line with the edge of the panel and panels are not uniform. You need to carefully match panels to provide for the best look. Otherwise the panels are fine.
    by
    • DIY
    • Verified Purchase
    • Recommended
    1 person found this helpful
    Had it shipped to the store. It was well packed. Good quality oak, on both sides. I was hired to ...
    Had it shipped to the store. It was well packed. Good quality oak, on both sides. I was hired to build a new station to look like the other 6 stations. I didn't know where to find the door panels. Luckily I went on the Home Depot website. I used them for cabinet door panels for a barber shop.
    by
    • Verified Purchase
    • Recommended
    The oak veneer pattern fit right into the cabinet design that I am working on. Needed a real wood...
    The oak veneer pattern fit right into the cabinet design that I am working on. Needed a real wood, thin profile panel that had 2 useable sides. Was also happy that I did not have to purchase a large panel with a lot of left-over waste, since I only needed 4 small door inserts to complete my project.
    by
    • Verified Purchase
    • Recommended
    The Columbia Forest Products Purebond Red Oak Beaded Plywood project panel was perfect size for c...
    The Columbia Forest Products Purebond Red Oak Beaded Plywood project panel was perfect size for covering the back of a bookshelf. The Red Oak pattern is quite apparent on both sides of the panel; one side is beaded and the other is smooth. I found that it didn't cut as smoothly as did the Maple Beaded Plywood project panel; however, it's easy to sand the edges to a smooth finish.
    by
    • Recommended
    This is a beautiful piece of beaded oak plywood for my spice cabinet project. Frankly I had expe...
    This is a beautiful piece of beaded oak plywood for my spice cabinet project. Frankly I had expected the plywood to come thinner than 1/4" but found the piece to be true to size. Both the intended beaded front or the back would look nice when completed. The plywood cut neatly with my table saw. The plywood layers are tightly sandwiched. The next test was staining my project. Using a high quality stain I was pleased with the results. The stain was even and enhanced the oak grain. Also important to me was that the resulting finished color was a perfect match for the oak boards which will be used in the project. I am very pleased with the quality of this piece.
    by
    • Recommended
    by
      Showing 1-10 of 106 reviews