#1 Home Improvement Retailer

Internet # 100660691

Model # DR34104

Store SKU # 721120

Store SO SKU #315129

1/8 in. Carbide Rounding Over Router Bit

$44.97
Apply Now
Pay $19.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Use in CNC, hand-held and table mounted routers
  • Use on CNC, hand-held, and table-mounted portable routers
  • TiCo Hi-Density Carbide for flawless finishes and longer life
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Diablo 1/8 in. Carbide Rounding Over Router Bit delivers a precise cut ideal for creating decorative edges in wood surfaces. Tri-Metal Brazing enhances impact resistance.

Highlights

  • Requires a minimum chuck size of 1/4 in.
  • Delivers a precise cut ideal for creating decorative edges in wood surfaces
  • High-density carbide body with a titanium construction for a long cutting life
  • Kick-back reducing design
  • Tri-metal brazing for impact resistance
  • Return Policy

Product Information

Internet # 100660691

Model # DR34104

Store SKU # 721120

Store SO SKU #315129

Additional Resources

Shop All DIABLO

Specifications

Dimensions: H 5.5 in, W 2 in, L 2.1875 in

Dimensions

Cut Radius (in.)

1/8 in

Product Height (in.)

5.5 in

Product Length (in.)

2.1875 in

Product Width (in.)

2 in

Shank Diameter (inch)

1/4 inch

Details

Individual/Set

Individual

Number of Flutes

2

Number of Pieces

1

Returnable

90-Day

Router/planer type

Forming

Self-Feeding

No

Tools Product Type

Power Tool

Questions & Answers

3Questions
caret
Q:This is described as a 1-7/8" radius rounding bit, but the photos show 5/8" radius. Please verify the actual radius of this bit.
by|Feb 6, 2024
0 Answer
Answer This Question
caret
Q:I'm planning on pouring epoxy on my laminate countertops and the company recommends rounding off the edges to allow the epoxy to flow over the edges easier. Can I cut right through the laminate with this?
by|May 3, 2021
4 Answers
Answer This Question

A:  It sure will, Angie. Thanks for the terrific question!

by|May 20, 2021

    A:  It could if you wanna pay too much money for a router bit.

    by|May 4, 2022

    A:  Yes you can. Make sure the router is set to the correct speed and go at a consistent speed to prevent tear out or buring.

    by|Jun 21, 2022

    A:  Depends upon what type of laminate your countertops are made of. Since it is a carbide bit it probably will work on most types.

    by|May 3, 2021
    caret
    Q:can it used with a hand held router?
    by|Aug 13, 2019
    2 Answers
    Answer This Question

    A:  Hi Ozzy! The DR34128 can be used in a handheld router as long as the throat of the router base is large enough to accommodate the bit’s 2” diameter. Since this bit removes a large amount of material, always be sure to use multiple passes to reach the full profile.

    by|Sep 28, 2021

      A:  Hello Ozzy, Thank you for your question. You can use this bit in a hand help router. You want to make sure that it will take a 1/2" shank and have a large enough motor to handle this bit. You might also want/need to make a couple passes to get a nice smooth corner.

      by|Nov 9, 2023
      2 found this answer helpful
      Showing 1-3 of 3

      Customer Reviews

      4.8 out of 5

      • 4.8 out of 140 reviews
      • 94% recommend this product
      Filter by:
      Showing 1-10 of 140 reviews
      Needed this to finish off a table I was building as a gift for my wife for Christmas. I was faced...
      Needed this to finish off a table I was building as a gift for my wife for Christmas. I was faced with rounding by hand when I found this bit at Home Depot. It did the job I needed. It produced a smooth clean cut.
      by
      • Verified Purchase
      • Recommended
      1 found this review helpful
      This bit is very sharp... holds it edge. 2 Thumbs up!
      This bit is very sharp... holds it edge. 2 Thumbs up!
      by
      • Verified Purchase
      • Recommended
      I picked up this rounding bit to finish my new table that I built for my wife. The bit cut throu...
      I picked up this rounding bit to finish my new table that I built for my wife. The bit cut through oak like butter and made a perfectly round edge. I am impressed at how well the bit worked and will certainly be using Diablo bits for the future.
      by
        • Recommended
        1 found this review helpful
        Worked as I would have expected. I was easing the edges of a butcherblock and it was as I wanted...
        Worked as I would have expected. I was easing the edges of a butcherblock and it was as I wanted. It did not burn the wood or gouge the edge.
        by
        • Verified Purchase
        • Recommended
        Cuts exactly as you'd hope a carbide router bit would! The bearing rolls smoothly, and the cut is...
        Cuts exactly as you'd hope a carbide router bit would! The bearing rolls smoothly, and the cut is accurate. The best thing about this bit is how well it matches the round-over on the Ikea drafting top I modified to fit my project!
        by
        • Verified Purchase
        • Recommended
        This a great router bit
        The router bit came sooner then I expected. It is just what I had needed and is to the quality that will last me thru my projects
        by
        • DIY
        • Verified Purchase
        • Recommended
        1 found this review helpful
        Made very nice cuts. Easy to control.
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        Showing 1-10 of 140 reviews