Store SKU #
Store SO SKU #
A: The threads on our Q58 end cap are ¾” male hose thread so if you were to remove the cap you could thread the C34 swivel adaptor to the Q58 end cap. If you have any other questions, please feel free to contact our technical service/ product support team at 1-800-322-9146.
A: Be sure that there is a hose washer in the adapter to prevent leaks.
A: It should not be leaking unless the washer is damaged or missing. I would recommend inspecting the screen washer to make sure it is intact. If you adaptor is still leaking please contact our technical service/product support team for more troubleshooting assistance 1-800-322-9146.
A: Make sure the rubber washer is in all the way
A: The C34 is designed for use with poly drip tubing .700 OD in irrigation applications only the fitting has not been tested for corrosion resistance to any other chemicals. If you have any other questions, please contact our technical service/product support team at 1-800-322-9146.
A: Yes. It's plastic with a stainless steel screen mesh filter element. Have used (2) of these in my irrigation system for over a year without issues (no leaks/ separation from the irrigation lines).
A: Yes, they hold up quite well
A: Yes. Will last for years even with well water.
A: It is corrosion resistant.
A: Yes. I DIY drip water hose for my plants, this tool make easy
|Name||3/4 in. Female Hose Thread x 1/2 in. 0.700 O.D. Compression Swivel Adapter||1/2 in. Poly Tubing x 3/4 in. Pipe Thread Swivel Adapter||1/2 in. Riser Adapter with 1/4 in. Micro Tubing Barb||1/2 in. In-Line Shut-Off Valve|
|THD SO SKU||531677||531677||531677|
|View Product||View Product||View Product||View Product|