#1 Home Improvement Retailer

Internet # 100015047

Model # R2707

Product Images

Roman Tub Rough-In Valve with Flexible Mounting Arrangement

$98.61
Apply Now
Pay $73.61 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Brass Construction
  • Backed by Delta Faucet’s Lifetime Limited Warranty
  • Comes with a cartridge
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

Complete your bath makeover with a luxurious Roman tub. The Roman Tub Rough-In Valve with Flexible Mounting Arrangement works with all 3-hole Roman tub trim kits, allowing you to install the rough and choose the trim later. For added convenience with installation, it allows you to tighten and adjust from above the deck.

Highlights

Product Information

Internet # 100015047

Model # R2707

Specifications

Details

Application

Shower

Color/Finish Family

Brass

Fits Faucet Brand

Delta

Material

Metal

Pack Size

1

Plumbing Part Type

Supply Line

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

Faucet and Finish Lifetime Limited Warranty

Questions & Answers

My old Roman faucet was set up that the two handles were next to each other, while the faucet was further along the surface of the tub. Would that pose any issues if I want to put this in its place?
ByOct 25, 2026
0 Answer | 
Answer This Question

Can I put PEX adapters on the flexible copper and connect them like that?
ByOct 22, 2026
1 Answer | 
Answer This Question

Hi EliF, The Delta Faucet R2707 would be installed with PEX cold expansion only. Unfortunately, we do not currently have an adapter for PEX crimping. We apologize for any inconvenience this causes. Please contact us directly if you have any additional questions! Sincerely, Themar Digital Communications Specialist

By|Oct 23, 2026


    Can I do propress connection on it
    ByOct 2, 2026
    2 Answers | 
    Answer This Question

    Hi Deltawork, Thank you for your question about the Delta Faucet R2707. Press fit connections could be used on the copper pipes. We also have valve roughs designed for PEX connections. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

    By|Oct 7, 2026

      Yes, I used propress fittings. Works great

      By|Nov 9, 2026


        Plumber/tiler did not leave enough room for the faucet to sit on. Is there an adapter or some way to extend the spout so it fits inside faucet?
        ByApr 11, 2025
        1 Answer | 
        Answer This Question

        Hi Adam, Thank you for your question about the Delta Faucet R2707. Unfortunately, we don't carry an extender for the spout. I apologize for the inconvenience this causes. The top washer should be flush against the deck. See installation videos here for more information: https://support.deltafaucet.com/s/article/Standard-Deck-Installation-for-Delta-R2707-R4707-Rough-for-Roman-Tubs-Video Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

        By|Apr 15, 2025


          I installed the delta 109457 Roman tub faucet . When testing my pressure. Water still comes out of spout. Looks like stem valves are not closing right I replaced with new ones and still can’t shut water off . What I’m I doing wrong ?
          ByDec 6, 2024
          1 Answer | 
          Answer This Question

          Hi Mike, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! Please reach out to us directly so we can further assist you with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

          By|Dec 9, 2024


            I’m having the Delta Ashlyn Roman deck mount faucet WITH SPRAYER SHOWER HEAD (p/n: T4764-SS)installed by a plumber ASAP!!! 4 holes. Please tell me the exact rough in parts to order? R4707, R4707-MF, R2707 or?
            ByOct 14, 2024
            1 Answer | 
            Answer This Question

            Hi Jazmine, Thank you for your question! For the T4764-SS tub filler trim with hand shower, an R4707 valve rough is needed. Model R4707 is a common choice and has 1/2" copper sweat inlet connections. We also carry R4707-PX with pex crimp connections and R4707-MF with memory fitting/cold expansion connections. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

            By|Oct 16, 2024


              what is the cartridge replacement for this Model # R2707?
              BySep 11, 2024
              1 Answer | 
              Answer This Question

              Hi Shaon! Thank you for your question and we are happy to help. The Delta R2707 uses RP24096. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

              By|Nov 3, 2024

                (1)

                does this model have a diverter
                ByAug 2, 2024
                1 Answer | 
                Answer This Question

                Hi randompilot! Thank you for your question and we are happy to help. This is the rough in valve for a roman tub. It does not have a diverter. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

                By|Aug 3, 2024


                  Viewing 1-8 of 48

                  Customer Reviews

                  4.4 out of 5

                  • 4.4 out of 125 reviews
                  • 92% recommend this product
                  Filter by:
                  Showing 1-10 of 125 reviews
                  Failed Factory Connection, no support from Delta
                  Do Not buy, poor quality product and even worse support from Delta. Purchased for a free standing tub with a mounting deck. I noticed a leak from under the tub after just a few days. Called the plumber back out on a weekend and after troubleshooting found a poor factory connection with a leak. Took good photos and videos and submitted to Delta, along with receipts for everything. It's been a few months and still no resolution or reimbursement from Delta. The ordeal with this rough-in valve cost me $1,500 but Delta does not care. Every time you reach out to them it's a different person looking at the case and it's almost like you are starting from the beginning. Extremely disappointed with the product and Delta's support and "Warranty".
                  by
                  Response from Delta Faucet SpecialistJul 14, 2026
                  Hi HDcustomer,

                  Thank you for your review of the Delta Faucet model R2707. Please accept our sincere apology for the inconvenience you are experiencing with a leak. We appreciate your feedback and apologize for the difficulty with assistance. As the manufacturer, we are committed to supplying you with a quality product that delivers the expected performance. Our warranty covers the replacement of any defective parts or products.

                  Please reach out for further assistance or with any questions!

                  Best Regards,
                  Bryan
                  Digital Communications Specialist
                  (800) 345-3358
                  customerservice@deltafaucet.com
                  DeltaFaucet
                    The rough-in valves flex hoses were a little bit of a challenge because the hole spacing on the tube was closer than recommended. The existing spacing was 9" and Delta recommends 10". I made it work with the 9" but it was challenging.
                    by
                    Response from DeltaFaucetJan 28, 2026
                    Hello!

                    Thank you for contacting Delta Faucet Company!

                    We are happy to hear our product meets your expectations! Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. If at any time you experience any issues with any of your Delta Faucet Company products please reach out to us directly. We will be happy to assist you!

                    We appreciate your feedback. Please reach out directly if you have further questions!

                    Best Regards,

                    Kyra
                    Digital Communications Specialist DeltaFaucet
                    • Verified Purchase
                    Not an easy install
                    I bought new taps for our Roman tub no knowing I had to install new valves as well. The old valves did not fit the new ones. I needed a plumber to do this installation. He had to redo some copper plumbing and drill new holes in the tub to fit the new larger valves.
                    by
                    • Verified Purchase
                    • Recommended
                    Looks great!
                    Looks great!
                    by
                    • Verified Purchase
                    • Recommended
                    Valve review
                    Valve body was bigger than it replaced, needed to do some carpentry to get it to clear the wood frame going around the tub. Original valve body was metal, this one is plastic, concerned me enough to use shark bite fittings instead of risking melting it with a torch and solder. Flexible 1/2 in lines to the valve are stiff and difficult to bend into the compound curve I needed for proper alignment. Valve clamps to the tub use a jack-screw design that will jump out of the track or go crooked unless you are very careful when tightening. HD sells a 1/2in spring loaded tubing cutter by "Husky" that easily cut the pipe square and can be operated with one hand.
                    by
                    Response from DeltaFaucetMar 13, 2020
                    Hi Daryl,

                    We appreciate your feedback! Please know that the valve body is solid brass with a non-metallic sheath/riser.

                    Best regards,
                    Jon DeltaFaucet
                    • Pro
                    • Recommended
                    3 found this review helpful
                    Quality Fixture
                    These rough-in valves were high quality. You get what you pay for in this fine Delta product.
                    by
                    • DIY
                    • Verified Purchase
                    • Recommended
                    excellent quality Delta product at great price
                    Purchased 2 Delta Windmere faucets, Roman Tub trim, and undermount Delta Roman tub adjustable valve. All items easily installed and working perfectly. Looks great!
                    by
                    • DIY
                    • Verified Purchase
                    • Recommended
                    This customer chose to rate the product and not provide text.
                    by
                    • Verified Purchase
                    This customer chose to rate the product and not provide text.
                    by
                    • Verified Purchase
                    This customer chose to rate the product and not provide text.
                    by
                    • Verified Purchase
                    Showing 1-10 of 125 reviews

                    Compare Key Features

                    current item

                    Product Snapshot

                    Ideal for customers who want flexible installation, ensuring compatibility with Roman tub trims.
                    Ideal for upgrading your bath, ensuring future trim flexibility and easy installation.
                    Upgrade your Roman tub with this durable, easy-to-install rough-in kit.

                    Compatibility with Multiple Plumbing Systems

                    Adjustable Components

                    Material Quality

                    Durable metal construction
                    High-grade metal components
                    Machined brass body, stainless steel plate

                    Number of Included Components

                    1 component
                    1
                    1

                    Ease of Installation

                    Easy, above-deck adjustment
                    Designed for easy installation
                    Easy installation, minimal fuss and mess