The DreamLine SlimLine shower bases showcase premium high-gloss acrylic, reinforced with fiberglass for durability and a modern, low profile design. SlipGrip textured floor surface offers slip resistance for safety. Glossy acrylic finish safeguards against stains for easy maintenance. DreamLine SlimLine shower bases are available in multiple colors and are sure to complement your bathroom style.
Base Height (in.) | 2.75 | Base Length (in.) | 48 |
---|---|---|---|
Base Width (in.) | 34 | Threshold Height (in.) | 1.75 |
Approximate Length x Width | 48 x 34 | Color Family | Black |
---|---|---|---|
Color/Finish | Black | Drain Location | Center |
Features | Slip Resistant Floor | Included | No Additional Items Included |
Installation Type | Rectangular | Material | Acrylic |
Number of Finished Sides | 3 | Pack Size | 1 |
Product Weight (lb.) | 44 lb | Returnable | 90-Day |
Shower Type | Alcove | Style | Modern |
Certifications and Listings | No Certifications or Listings | Manufacturer Warranty | Limited lifetime manufacturer warranty |
---|
The drain location for this shower base is set at 15" x 24" as it is shown in the technical drawings. The technical drawings are in the photo slideshow directly to the left of the main product picture and they are 100% accurate. For center drain shower bases, the drain will be centered across the width of the base, but not necessarily the depth. Please use the technical drawings as the guideline for your plumbing for your drain. Thank you for your interest in DreamLine!
The QWALL-VS acrylic walls are a trim-to-fit wall system that gets glued to backer board. The 54" QWALL-VS model size will fit, but you will need to trim the walls much more for this model size than you would if you got the 44-48" QWALL-VS model size (model # SHBW-1548760-00). The 48" single threshold SlimLine shower bases are designed to be paired with the 44-48" QWALL-VS (model # SHBW-1548760-00), but you could technically use the 54" wall size if you wanted to (bearing in mind that you will need to cut more off the wall panels to make them fit before installing them). Thank you for your interest in DreamLine!
Unfortunately, no - you cannot tile over any of the surfaces of the SlimLine acrylic shower base as doing this will completely destroy the shower base and make it completely unusable. Attempting to tile over the SlimLine acrylic shower base will also completely and immediately void the warranty on the product. Once you install the base to studs and hang backer board, you can tile your walls, but the curbs and standing area of the base cannot have any tile applied to the surface and doing this will definitely destroy the base. Thank you for your interest in DreamLine!
SlimLine shower bases have a threshold that is 2-3/4" wide. Thank you for your interest in DreamLine!
The threshold for this shower base is on the 42" side. If you look to the left of the main product picture, you will see a photo slideshow. The technical drawing for this base is the 2nd photo in the slideshow. The threshold you will step over is 42", the back of the base is 42", and the 2 sides of the base are 34". We do not make any bases where the threshold is on the shorter side of the base. Thank you for your interest in DreamLine.
The QWALL-VS backwalls are the only compatible backwalls that we offer to match with this base. They are not a direct-to-stud (screw into the wall) installation - they must be glued to backer board. DreamLine does not offer any sort of direct-to-stud wall systems. All of our shower walls must be trimmed to fit the opening, then glued to backer board. We do not test our products with products made by other manufacturers, so unfortunately, we cannot guarantee that our shower base will be compatible with any products made by other manufacturers. If you have any other questions, we invite you to contact our DreamLine PreSales Consultants at 866-282-8413. We can also be reached by sending an email to support@dreamline.com. Our hours of operation are 9am-6pm EST, Monday through Friday. Thank you for your interest in DreamLine.
For all of our SlimLine shower bases, the dimensions we provide are the rough-in dimensions that you will need to frame out. In other words, the stated dimensions for our SlimLine shower bases are the dimensions "to the studs". For example, the 42x34" base will require your framing dimensions to be 42" x 34", the 48x34" will require your framing dimensions to be 48" x 34", etc. If you are looking for the dimensions for the drain location, please review the technical drawings for the shower base which can be found in the smaller photo tiles in the photo slideshow to the left of the main product picture. If you have any other questions, we invite you to contact our DreamLine PreSales Consultants at 866-282-8413. We can also be reached by sending an email to support@dreamline.com. Our hours of operation are 9am-6pm EST, Monday through Friday. Thank you for your interest in DreamLine.
Please do not fasten the tile flanges of the DreamLine SlimLine shower base to the studs as doing this will completely void the warranty on the shower base. The DreamLine SlimLine shower bases must be installed directly up against studs in a bed of sand-mix mortar. Drilling into the tiling flanges and fastening them with screws will most likely result in damage to the base which would not be covered under the warranty. To maintain the warranty on the shower base and to avoid cracking any part of the shower base, please install it exactly the way the manual instructs. If you have any other questions, we invite you to contact our DreamLine PreSales Consultants at 866-282-8413. We can also be reached by sending an email to support@dreamline.com. Our hours of operation are 9am-6pm EST, Monday through Friday. Thank you for your interest in DreamLine.
Viewing 1-8 of 65
4.5 out of 5