$12.98
- Anchor splits and grips for strong hold
- An audible click will indicate the anchor is secure
- No pre-drilling necessary, installs with #2 Phillips screw driver
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Specifications
Questions & Answers
33Questions
Q:Do you offer this particular anchor with a flat head screw instead of the pan head. The bracket I want to attach won't work with this type of screw.
by|Apr 6, 2023
1 Answer
Q:Can I use these for hanging a wire rack on a hollow Wood door?
by|Feb 4, 2023
3 Answers
Q:what is the size of the screw? I.E. #8, #10 etc
by|Nov 26, 2022
1 Answer
Q:Can you reuse these anchors if you screw them into the wrong spot?
by|Nov 22, 2022
1 Answer
Showing 1-4 of 33
5
1124
4
141
3
36
2
29
1
78
Feb 1, 2022
These bad boys held up an expensive glass chandelier in...
These bad boys held up an expensive glass chandelier in our ceiling. Easy to use and install exactly where I needed it
by
Dec 17, 2021
These are the best anchors I have found. They are...
These are the best anchors I have found. They are easy to use, no pre drilling required and they just work every time for me. I have bought similar styled ones from other stores but I threw them away because they always needed a pre drilled hole and the whole point of these is ease of use! Haha. HIGHLY Recommend these!
I use them to hang up everything from huge wooden signs to my basic picture frames and cordless battery chargers. They can handle almost anything and are super reliable. I have been using these for years without fail.
by
Jun 16, 2021
Breaks every time
We swore by these anchors until this last purchase. Either there was a fault in manufacturing or they’ve changed something on purpose. Out of this box, we’ve tried half a dozen or so and consistently the top, the bit that should be flush with the wall, snaps off before it is flush. Frustratingly consistent. We’ve tried without predrilling as the box says and even tried predrilling just to see, and they still failed.
by
Response from PaslodeJun 18, 2021
Hi Chris, thank you for sharing your feedback. We are sorry to hear that your experience with our product did not match your expectations from your first purchase. Please feel free to call us at (877) 489-2726 or email us at CS@itwbrands.com. We’d like to learn more about your experience and make things right.
Jun 3, 2021
I use these all the time to hang pictures, mirrors,...
I use these all the time to hang pictures, mirrors, etc. Work great. Easy to install!
by
Apr 21, 2021
Beware of Labeling (My pack said #8 screws)
I bought these anchors, but needed longer screws because of what I am mounting on the wall. MY box of anchors says that it comes with SIX pairs of anchors with #8 screws, so I bought a pack of #8 2-inch screws. Well, they don't fit. :(
1) I went to the manufacturer's website, and their picture of the box for model #11353 says #6 screws. Six #6 screws. https://www.easyanchors.com/products/twist-n-lock
2) I checked the description of the product on the Home Depot website, and it says #6 as well.
So, the manufacturer messed up!! Unbelievable. One more trip to the store for me.
I hope they work well. If they do, I'll update my review (if HD lets me).
by
Apr 13, 2021
cheap plastic
Needed 8...6 broke to get to those 8. Not very happy with these.
by
Jan 23, 2021
Very easy to use drywall anchors
I never liked having to drill a hole for the anchor and then push the anchor in, these self drilling anchors take that step away. The anchors comes pointed so you don’t have to worry about making the hole away from your mark. The only downside is the hole this creates is much bigger, but any size hole requries patching later so not much of a problem for me.
by
Jan 10, 2021
Great anchor
I had a towel rod loose n the bathroom and it snug and firm after install of ez anchor. Great profuct
by
Jul 9, 2020
Good anchors
I have been using these anchors for the past 3 years and have had good luck with most of them. I have had a couple break upon entry into drywall but I usually just grab the next one and it goes in just fine. These are nice to have when you don't have a drill around or maybe when you just want to get a small project done in a hurry and don't want to get a drill out. All you need is a good phillips head screwdriver and you're in business. These did meet my expectations and the only thing I dislike is when some of them break randomly. Please hit the thumbs up button if you found this helpful.
by
May 5, 2020
This is without a doubt my favorite drywall anchor! I’ve used these for years and have never had...
This is without a doubt my favorite drywall anchor! I’ve used these for years and have never had one fail on me. They are very easy to install using a Phillips head screwdriver, I use the slow setting on my drill. When it is time to come out, you can get them out or just cover up the plastic tip that still shows, either way it covers well and not that much harder than a standard nail hole. Rated at 50 pounds each so a couple of these will handle most anything you want to hand on your wall.
by
0/0
Compare Similar Items
Anchor Diameter (in.) | |||
|---|---|---|---|
#6 | #8 | #8 | 5 |
Fastening Base Material | |||
Drywall | Drywall | Drywall | Drywall |
Fastener Material | |||
Nylon | Nylon | Nylon | Alloy Steel |
Fastener Type | |||
Drywall Screws | Drywall Screws | Drywall Screws | Molly Bolts |
Interior/Exterior | |||
Interior | Exterior | Interior | Interior |
Related Searches
Related Products
The WallDrillerPLUS is designed to offer the superior holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring superior holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available in #6, #8L, #10 and #12.
The WALLDRILLER PLUS is designed to offer the superior holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring superior holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available in #6, #8L, #10 and #12.
These Molly Bolt Fasteners by Prime-Line Products are constructed of steel components, and they are used as specialized screws to fasten objects to plaster and gypsum board where there are hollow walls. These fasteners are anchors with expandable sleeves that slide into pre-drilled holes of hollow walls. A lip wider than the hole prevents the bolts from falling into the hole and behind the hollow walls. Upon fastening, a machine screw is then screwed into the sleeve, causing the anchor to bend, expand, spread and grip against the inside of the drywall. These fasteners fit into a 1/4 in. Dia holes, and they will fit up to 9/16 in. thick panels. Will self pierce into the desired surface.
E-Z Ancor Twist-N-Lock 75 lbs. Medium-Duty Drywall Anchors (50-Pack) are ideal for hanging pictures, mirrors or installing shelving. The anchors are easy to install or remove using only #8 x 1-5/8 in. screw (included) and a #2 Philips screwdriver. No pre-drilling is necessary - screw directly into drywall.