#1 Home Improvement Retailer

Internet # 100114666

Model # BR230

Store SKU # 532815

BR 30 Amp 120/240 Volts 2-Pole Circuit Breaker

$16.63
  • Helps prevent overheating and short circuits
  • Breaker trips to a center position
  • Designed for use with BR load centers
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The Eaton Cutler-Hammer 30 Amp Double-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. Double pole breaker applications include use with built-in oven, range top, clothes dryer and water heater. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

Highlights

  • Primary function of a circuit breaker is to protect the wire from overheating (overload) and fault currents (short circuit)
  • Amperage rating: 30 Amp
  • Double pole 2 in. wide breaker
  • Trips to center position - must turn off then turn back on
  • For use in type BR load centers
  • Type BR breakers are UL approved genuine replacement breakers for load centers made by Westinghouse, Challenger and Bryant
  • Interrupt rating - 10 kAIC
  • Voltage rating is 120/240-Volt
  • Wire size - #14-4 AWG Cu/Al at 60 degree C or 75 degree C
  • Gauge/number of wires with ground - 10/3
  • Learn More About Circuit Breakers Here in our Buying Guide.
  • Return Policy

Product Information

Internet # 100114666

Model # BR230

Store SKU # 532815

Additional Resources

Shop All Eaton

Specifications

Dimensions: H 3 in, W 1.96 in, D 3 in

Dimensions

Product Depth (in.)3 inProduct Height (in.)3 in
Product Width (in.)1.96 in

Details

Breaker TypeDouble PoleElectrical Product TypeBreaker
Interruption TypeStandard TripMaximum Amperage (A)30
Mounting TypePlug-OnNumber of Poles2
Pack Size1Power Distribution FeaturesNo Additional Features
Product Weight (lb.)0.52 lbReturnable90-Day
Voltage (V)120/240

Warranty / Certifications

Certifications and ListingsANSI Certified, CSA Listed, UL ListedManufacturer Warranty5 Year Per the Warranty Statement

Questions & Answers

136Questions
caret
Q:Is this compatible to replace a challenger breaker
by|Feb 29, 2024
0 Answer
Answer This Question
caret
Q:Is this a single phase braker. For double ovens
by|Feb 2, 2024
1 Answer
Answer This Question

A:  Hello, If your double ovens are on one circuit, the BR250 will work. However, if it requires two circuits, you will need two separate breakers. If you have more questions or concerns, please call our technical support team at 877-386-2273 Opt. 2 Opt. 3 Opt. 1 and we would be happy to assist you.

by|Feb 7, 2024
    caret
    Q:Eaton breaker it is comparable with cutler breaker panel
    by|Jan 13, 2024
    1 Answer
    Answer This Question

    A:  Hello, BR breakers are 1" in wide and have black handles. CH breakers are 3/4" in Wide and have Sandalwood (Tan) handles. Therefore, they are designed for load centers. If you need help selecting the correct breaker, please call our technical support team at 877-386-2273 Opt. 2 Opt. 3 Opt. 1 and we would be happy to assist you.

    by|Jan 17, 2024
      caret
      Q:Will this breaker replace a challenger breaker
      by|Jan 7, 2024
      1 Answer
      Answer This Question

      A:  Hello, Yes, the BR250 can replace a Challenger 2-pole, 50A circuit breaker. If you have more questions or concerns, please call our technical support team at 877-386-2273 Opt. 2 Opt. 3 Opt. 1 and we would be happy to assist you.

      by|Jan 8, 2024
        Showing 1-4 of 136

        Customer Reviews

        4.6 out of 5
        • 4.6 out of 895 reviews
        • 94% recommend this product
        Filter by:
        Showing 1-10 of 895 reviews
        used part that doesn’t work
        Either the QAQC is horrible or this is a used part. It’s a dual breaker and only one line has power the other 0 V and a screw is stripped out.
        by
        Response from EatonDec 21, 2023
        Hello,
        Sorry you had a bad experience with the BR215. If you are having issues with our products, please call our technical support team at 877-386-2273 Opt. 2 Opt. 3 Opt. 1 and we would be happy to assist you. EatonCircuitProtection
          • Recommended
          Received a used, defective breaker (doesn't reset)
          Ordered it online; came as shown in picture (without being in a plastic casing). Looks worse than my 22+ yrs old other breakers in the panel. The switch does not reset. Horrible experience. Home Depot have deteriorated in the last few yrs, can not trust them anymore. Out of 5 purchases in the last couple yrs from HD, 4 have been returned due to issues created by HD (repacked/resold returned item, allow electric parts to become compromised and still sell them, etc)
          by
            1 found this review helpful
            Lacks hole for hold down screw
            All of the 2-pole breakers at my store lack the hole for the hold down screw. I am trying to use the Eaton BREQS125 hold down screw, the pictures on the site show the breakers with the hole, the model number and SKU match, but there is no hole in any of the breakers.Either Eaton or HomeDepot has swapped out the model without changing the information/picture. I had to order a breaker online in order to install the panel correctly.
            by
            Response from EatonJun 3, 2022
            Hello,
            To have a tapped hole for the hold down screw, you will need to order BR220B. The "B" suffix indicates that the factory made the hole for the hold down. Feel free to call 877-386-2273 opt 2, 3, 1 if you have any more questions. Regards, Eaton EatonCircuitProtection
              3 found this review helpful
              Replaced After 4 Months
              This lasted 4 months before it melted/caught fire. Ironically, the breaker never tripped. Would NOT recommend
              by
              Response from EatonJul 28, 2023
              Hello,
              Sorry you had this bad experience. If you ever have issues with our products, please call our technical support team at 877-386-2273 Opt. 2 Opt. 3 Opt. 1. EatonCircuitProtection
                1 found this review helpful
                2nd Tesla charger at home.
                Worked fine in my Eaton, Solar Ready 200 amp panel.
                by
                • Verified Purchase
                • Recommended
                3 found this review helpful
                Awsome Breakers!!!
                Awsome Breakers!!!
                by
                • Verified Purchase
                • Recommended
                Installed this product by a certified Electrician in August of 2017. I also had it inspected by ...
                Installed this product by a certified Electrician in August of 2017. I also had it inspected by the country to make sure everything was done by code. The breaker is hooked up from the main panel and goes to my garage in a sub panel where its broken in two 50Amp, each for two EV chargers (40A and 32A). One day, I happened to go in the basement and it smelled like something was burning like rotten fish. Tracked the smell to the circuit breaker where the 100 amp was warm and I could smell the burning. I immediately turned it off. Luckily I was home that day or else my house would've been in flames. The breaker never tripped.
                by
                  1 found this review helpful
                  The product was exactly what I needed thank you!
                  The product was exactly what I needed thank you!
                  by
                  • Verified Purchase
                  • Recommended
                  Fit perfectly into our Reliance 10-Circuit 30 Amp Manual Transfer Switch Kit.
                  by
                  • Verified Purchase
                  by
                  • Verified Purchase
                  Showing 1-10 of 895 reviews