0.25 in. x 3 in. x 18 in. Steel Hammered Gold Logan Bracket

A:  Thanks for reaching out. Sure! These are often used with granite, shelving, bar overhangs, and more. These particular brackets need to be installed during or before the installation process. Installation is hassle-free, with the pre-drilled holes. Proper installation would be key, in using them in a load-bearing application. For the install guide, feel free to visit: https://images.homedepot-static.com/catalog/pdfImages/06/06c916d6-e837-4ea6-920a-136017967c6d.pdf

A:  Thanks for reaching out. These brackets are typically used in installations such as cabinetry, kitchen islands, and bar support. While they may work in your application, we'd recommend reaching out to a local professional to determine if they are appropriate for your project. To review the installation instructions, please visit: https://images.homedepot-static.com/catalog/pdfImages/06/06c916d6-e837-4ea6-920a-136017967c6d.pdf

A:  No, they are drilled on one side only.

A:  Thank you for your question. These brackets only have holes on the mounting side and not on the front side. You can feel free to drill additional holes on site if you would like to.

A:  The bracket is 1/4" thick steel and can provide structural support. However, due to the varying aspects and uses of counter top applications, we cannot guarantee that any bracket in our design will carry a specific amount of weight. In addition, there are several other considerations such as the size of the overhang, the thickness and material of the counter top, and the number and spacing of the brackets intended to be used. As a rule of thumb, brackets should be spaced no farther than 16" apart. For stone (or similar) counters that are 2 cm thick or less, the maximum unsupported depth is 10". For stone (or similar) counters that are 3 cm thick or less, the maximum unsupported depth is 6". If your application requires a specific capacity load, we suggest that you consult a design engineer to review your selected bracket and its use in your application.