1/2 HP Upflush System Sewage Ejector Pump Kit

This product changes everything. I did not know that I wanted a toilet in my shed until I found this product. The installation instructions were very easy to understand and follow. You will definitely want a flat and level surface, but a mostly flat and level surface will work. This product is very heavy so you might require some help. It is made from cast iron. Everything you need comes with it with the exception of the minimal tools. I have a standard size toilet that I used. Everything works exactly as you would expect it to and it's pretty quiet. If you are looking to add functionality inconvenience to your life I recommend this product all day every day.

This is a complete kit for installing a toilet in a basement, remote cabin, shop, or warehouse. The case is sturdy but not too heavy. The case itself is a little too industrial-looking to be left exposed inside a guest bathroom, I think, but I suppose it could be concealed behind a false wall and underneath a false floor. The toilet can be mounted facing away from the raised container portion, or parallel too it, and this system can handle a nearby bathroom sink drain, too.

This thing looks amazing. I haven’t had a chance to install it yet bought I got it because I saw one in action. Just came in the mail, it seems very easy to install. Just strap a toilet to it run simple plumbing and she’s ready. I’m going to build the rear side into my wall when I finish my basement, it’s seems that a vanity and or shower can run into it also. Gone are the days of busting up old concrete for a basement toilet. It’s pretty light and the step up isn’t dramatic at all.

Review is based on initial thoughts as it was due before I could install. The pump is very heavy and has 2 three prong plugs and comes with a check valve and pvc pipe for outflow, you’ll need you’re own elbows, and external plumbing. The base is heavy duty and sturdy molded plastic and I don’t think it could ever leak. It comes with All screws needed for the access panel. Also comes with a wax ring for the toilet. The toilet can be mounted either straight on or to the side. We will be installing this with the plumbing on the other side of the wall to hide. Overall I feel good about this one, just hoping the pump doesn’t rust out.

This upflush 1/2 horse pump kit is perfect for adding a toilet almost anywhere. it has a large tank that the extra heavy sewage pump sits in come with all connections including the check value. The pump is made of cast iron and with ball bearings it is very quiet. It has a 10 lift and full 2inch of discharge. comes with a 10 foot long cord. Almost all toilets will bolt right down. Would work great for shop or travel trailers. And you cant go wrong with quality and dependability of the Everbilt products and pumps.

The Everbilt sewage basin systemgive you the flexibility of adding a free standing toilet to almost any finished surface. I have not installed this unit yet, but it will go in a basement, below-grade restroom. My review does not cover operation, but I've got other everbuilt pumps and have not experienced any problems (with them working), so I expect the same dependability from this sewage pump. The pump is cast iron; a real plus! Claims it will handle 2" solids; another plus. ...and at a rating of 6K gallons per hour it is more than sufficient for (my) residential use. The basin (within which the pump is located) is a heavy plastic-like material. I'll seat this w/n the floor (i.e., the basin's platform will be w/n 1/2" of the floor level) and cover it with tile. SOOOO, I am hoping there is NO flex to the platform when the toilet is being used. That concern is THE ONLY reason for my not giving this an overall 'excellent' rating. The instruction booklet (install, care and use) is quite good with illustrations and clear instructions. The self-contained upflush unit make install a bit easier than trying to jerry-rig different manufacturers' components together. I should mention (though I won't being using them) this upflush kit allows you to connect in a shower and/or sink unit too ...another plus!

The Everbilt 1/2 HP up flush system sewage pump kit arrived quickly with all the parts and pieces included and contained in the shipping carton. I ordered it because of our need for a basement bathroom with a septic tank/leach field sewage system. The shower/sink and toilet discharge has to be pumped upward into the sewage pipe and outward into the septic tank. I like the design of this kit. Specifically I like the 1/2 HP power to do the job. (I will say this, I recommend a larger volumn flush toilet). The quality is excellent. I have an older Everbilt sump pump that is a power horse to remove water. I will install this easily by following the instructions and it will do the job as expected, I like the whole concept of it and the ease of installation.

This is a fabulous EVERBILT 1/2 HP UPFLUSH SYSTEM SEWAGE PUMP KIT and it is a complete set, including everything other than a toilet one would need to install a basement toilet upflush system. Inclusive of a top of the range Everbilt sewage pump, and accessories of pipe, connectors, base, even including a wax ring. A complete, easy instal, and quality kit.

We have been thinking about putting a bathroom in our basement for quite some time now and this upflush system seems to be the perfect fit. Installation was fairly easy because the spot for my new bathroom was right by the main 4 inch house waste line. I built my framing around it and drywalled over so that it was hidden from view. The unit is high quality and fairly quiet when the pump runs. The pump itself is heavy duty and made of cast-iron. I would reccomend this to anyone that is thinking about putting a bathroom in their basement.

I am reviewing the 1/2 HP Upflush system sewage pump kit. The first thing I noticed was that the shipping weight was 90 pounds and once it arrive, it was all that 90 pounds. The pump itself is very heavy and well made. The base and the compartments are solid as well. This is made of cast iron for long lasting use. This system comes with the base, pump, some pipes and adaptors, everything you will need to help set up a flexible sewage movement system. We will be placing a toilet on the base as this seems to be the main purpose for this kit, although this kit can be used to flush shower, sink or any other grey or sewage water you need to move. The will pump the water up to 20 feet in elevation lift. This will pump 6000 GPH (Gallons Per Hour) at 10 ft. of lift. the pump uses a standard 115V outlet and the cord is 10 feet long. This was designed to add a freestanding toilet to almost any finished surface. We are going to add this to our small cabin in our recreational ranch. We will need to buy the toilet and the pipe to run it from the Upflush kit to the septic system. The discharge pipe provided is 2 inches NPT. This is designed to not clog very easy, also the material does get reduced in size by the vortex impeller. The pump has a 10 foot power cord with a 1 year warranty. This is rated at 145 Gallons per minute, so it will easily handle flushing a toilet. That would be 8700 GPH. The kit is 41 inches from front to back or Depth 25 inches wide 20 inches in height We will need to build a subfloor around the base of this unit so that you can safely reach the subfloor while sitting on the toilet. What a nice addition to our cabin.