Internet #205617255

Model #SW07501TC

Store SKU #1001194470

Store SO SKU #1001073267

1/2 HP Upflush System Sewage Pump Kit

  • Adds a freestanding toilet to almost any finished surface
  • Removes 6,000 GPH at 10 ft. of lift
  • Made of durable cast iron for long-lasting use
  • See More Details

Frequently Bought Together

+
+
Price:
$67900

Product Overview

EVERBILT
This is a Sewage/Effluent pump.
This pump is made of Cast-Iron material.
This pumps dimensions are 25 in. Depth x 20 in. Height x 41 in. Width.
The discharge flow rate of this pump @ 0 ft. is 145 GPM.
This pump has a horsepower of 1/2 hp.
This pumps voltage is 115v.
This pump has a vertical lift of 20 feet.
The warranty on this pump is 1 Year. View more details by clicking on "Warranty" under info & guides.
Illustration may vary from actual product.
The Everbilt sewage basin system gives you the flexibility of adding a free standing toilet to almost any finished surface in your home, warehouse or factory. The automatic vertical float switch activates the 1/2 HP sewage pump that is contained in the sealed basin. The 1/2 HP pump removes 6,000 GPH at 10 ft. of lift. It is constructed of rugged cast-iron for maximum pump life. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is built with ball bearings to provide quiet operation. The graphite and ceramic mechanical seals provide extended motor life. The unit has a 2 in. NPT discharge with a 10 ft. power cord. 1-year limited warranty is provided.
  • Pumps 6,000 GPH at 10 ft. of lift, emptying a sewage pit quickly
  • Designed to remove waste water from toilet, non-sewage basin shower, this unit is ideal for basements, room additions, factories and warehouses
  • Installation is easy onto almost any surface
  • Unit is supplied with 2 in. discharge and check valve assembly
  • Shop All Everbilt Sewage/Effluent Pumps Here

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Sewage & Effluent Pumps

1/2 HP Sewage Pump Kit with Basin
current product
1/2 HP Upflush System Sewage Pump Kit
SaniPlus 0.5 HP 115-Volt Macerator Pump082 Saniaccess 3 Macerator Pump (1/2 HP)
BrandSuperior PumpEverbiltSanifloSaniflo
Name1/2 HP Sewage Pump Kit with Basin1/2 HP Upflush System Sewage Pump KitSaniPlus 0.5 HP 115-Volt Macerator Pump082 Saniaccess 3 Macerator Pump (1/2 HP)
Price
$40824
/box
$67900
$82025
$83300
Ratings
(3)
(33)
(23)
(14)
Discharge Flow @ 0 ft. (gallons/hour)48008700270
Housing MaterialCast-IronCast-IronThermoplasticOther
Voltage120v115v115v115v
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
25
Product Height (in.)
20
Product Width (in.)
41

Details

Actual Solids Capacity
2 in.
Amperage (amps)
15
Cord Length (ft.)
10
Discharge Flow @ 0 ft. (gallons/hour)
8700
Discharge Flow @ 0 ft. (gallons/min)
145
Discharge Flow @ 10 ft. (gallons/hour)
6000
Discharge Flow @ 10 ft. (gallons/min)
100
Features
No Additional Features
Housing Material
Cast-Iron
Maximum Horsepower (hp)
0.5
Maximum Pressure (psi)
8.94
Maximum Working Temperature (F)
131
Minimum Sump Basin Diameter
18 or More
Minimum working temperature (F)
35
Outlet Connection
Threaded female
Pack Size
1
Power Type Required
AC
Product Weight (lb.)
83.99
Pump Switch Type
Vertical
Returnable
180-Day
Vertical Lift (ft.)
20
Voltage
115v

Warranty / Certifications

Certifications and Listings
CSA Certified
Manufacturer Warranty
1

Questions & Answers

51Questions16Answers

What pump and floater does the unit take

Asked by Rocco November 6, 2020
1
Answer

Please call the office so we may review with you on this prodcut. Our number is 844-242-2475.

how is everyone connecting the shower and sink? I dont see any inket holes in the pictures.

Asked by ryan July 29, 2020
1
Answer

You will need to punch-in holes to the body of the box. Then you can run your additional piping. If you have further questions, please call our office at 844-242-2475.

Flange

Asked by StephenM June 24, 2020
1
Answer

Please give our office a call. Will be happy to review with you on this matter. Our number is 844-242-2475.

The cord grommet has a cut in it. Its not all the way through. Is this normal? How do i get another one if this one is broke?

Asked by Help559 June 17, 2020
1
Answer

We are interested to hear more about your application for the pump. If you would contact us at 844-242-2475 we would like the chance to learn more.

how would you connect a shower and vanity to this item ???

Asked by Michael April 18, 2020
1
Answer

Please give out office a call. Will be happy to review process of that. Our number is 844-242-2475

The motor is not working and the toilet is full of water?

Asked by Noemi February 26, 2020
3
Answers

I’d like to help but you didn’t ask a question. Please do so and I will try to help you.

Can you send me the exact dimensions of the length width and height of the platform

Asked by 1234 December 23, 2019
1
Answer

The dimensions of the platform are 39 5/8" D x 5 3/8" H (front; 19 1/4" back) x 25" W.

Is there something to pour in the system to cut the order

Asked by KB December 11, 2019
2
Answers

I’d like to help but I do not know what you are asking. Please restate your question.

what is the height that toilet base sits off floor

Asked by howard November 6, 2019
2
Answers

Very close to 5 1/2”.

Issue with water level after flushing

Asked by AS October 16, 2019
3
Answers

I have had the same problem. I found the water level in the stand/tank the toilet sits on is to high. So the water level is up to the toilet trap. When the pump comes on it pulls the water out of the toilet. My problem would not happen the next flush after the pump comes on because it drains the water away from the toilet trap. I had to get the pump to come at a lower water level so it never is up to the toilet trap.

1/2 HP Upflush System Sewage Pump Kit - page 2

Customer Reviews

  • 33 Customer Reviews
  • 3.8 out of 5 stars overall
90% of customers recommended.
Overall Ratings
5star-icon(13)
4star-icon(12)
3star-icon(2)
2star-icon(0)
1star-icon(6)
Sort By:
I have wanted a half bathroom in my basement for a long time and with the recent expansion of my ...
Ease of installation :
5
Quality :
4
Seeds Program Review
(What's this)
I have wanted a half bathroom in my basement for a long time and with the recent expansion of my wood shop it became a top priority for me AND MY WIFE to prevent tracking sawdust up into the house. Being in the home construction and remodeling business I have install many basement bathrooms over the years. We generally cut the concrete floor to install a sump and make additional cuts to lay the pipes under the floor. The resulting finished bathroom, half or full, looks and functions exactly like every other bathroom on the upper floors. For my needs I neither needed nor wanted to go through all that work. I simply needed a functioning bathroom with a toilet and sink in my basement for my workers and me to use during our work day. When I saw this surface mounted system available from Home Depot I jumped at the chance to give it a try. In order to be able to use this system, you need access to the main waste line for the house - usually 3” or 4” PVC, ABS, or cast iron; a cold water supply line (plus a hot line if a sink is to be installed); ability to tie into a 2” or larger vent line since the manufacturer specs call for an open vent and not the use of a STUDOR or Air Admission Device; and a 120vac GFCI outlet - all basement outlets must be GFCI protected per NEC. So far I have placed the base within 1/8” of level per the instructions. I have tied into the house’s 3” PVC main vent line and run a 2” PVC waste discharge line from the included check valve on the basin to the main 4” PVC house waste line. I had a 120vac GFCI dedicated outlet close by for the power source. Before I set the toilet I am going to frame and drywall a basic enclosure to form a small half bathroom complete with a sink, ceiling light, outlet, and ventilation fan - all of which are required by the local building official in my area. As far as the assembly of the system, it is very straightforward. The enclosed instruction booklets (3) are clear and well illustrated. I poured water into the base to test for proper operation. I was a bit disappointed with how loud the pump was while running. Since all my past experiences had been with remotely located sump pumps I guess I should have expected the noise since this 1/2 HP pump is located right in the basin. It’s not loud enough to recommend against using this system - but I did want to mention it. The pump discharges 6000 GPH = 100 GPM @ 10 feet head. I don’t know anyone who has any bathroom that uses 100 GPM! My only disappointment was the flimsy metal bracket to which the float switch is attached. It is so thin that it easily bends out of position with the slightest force. Before I put the system into service I have decided to fabricate a new bracket out of some 16ga 316 stainless steel I have in the shop. Better to do it now under clean conditions than to have it malfunction because of a bent out of position float switch. The basin itself is constructed from a heavy gauge plastic of some kind. The lid is constructed of the same thick material, comes with a gasket that is field applied, and is held firmly in place with 20 1/4” stainless bolts. The manufacturer warrants this product to be free from defects in materials and workmanship for 1 year. It is made in China.
Was this helpful?
0
0
connecticut, stratford
Ease of installation :
3
Quality :
4
Seeds Program Review
(What's this)
Have had the plumber install the EVERBILT 1/2 hp up flush system sewage pump kit for about a month now and have had no problems, when the pump kicks on it is a bit loud so I was able to wrap the pipe with sound proof insulation prior to closing up the walls. The kit takes up a little more room than I thought and required some extra work at installation. Would definitely recommend if space allows remember the flor has to be raised for the bathroom to look good I used 2X6 joists.
Was this helpful?
0
0
The everbilt 1/2 HP sewage pump is the true heart and sole of this entire system. First off, I w...
Ease of installation :
4
Quality :
5
Seeds Program Review
(What's this)
The everbilt 1/2 HP sewage pump is the true heart and sole of this entire system. First off, I was amazed at just how quiet the operation is! While I did change out the PVC piping for cast iron, I still couldn't believe just how quiet the overall operation of the unit was. One big question that I'm sure everyone asks. Does the pump run all the time? The quick and simple answer is NO. The toilet I'm installing is a 1.5 gallon flush and without using the sink or shower, I can flush the unit 4 possibly 5 times before the pump runs. The pump will run about 20 second and then shuts off. I was most impressed with all the "extra" items that came packaged with the pump and holding tank. Basically everything you would need for the installation, but the toilet itself. This is a big project installing an upflush system. But if you take your time, you will gain yourself a basement (or lower floor) bathroom you will be so proud of. I hope the pictures I have attached will help you understand the holding tanks size.
Was this helpful?
0
0
The reason why I recommend this product is for the reason that it works very well for discharging...
Ease of installation :
3
Quality :
4
Seeds Program Review
(What's this)
The reason why I recommend this product is for the reason that it works very well for discharging waste form a basement or area where underground connections/piping can not happen. The " EVERBILT 1/2 HP UPFLUSH SYSTEM SEWAGE PUMP KIT " is a big kit and I would recommend a plumber! I had some issues installing it because of the final ejection location to a waste line. You will need to figure out where to connect it to at its final exit, you will need to buy a low profile/seat height toilet(if using it for a toilet) due to the platform height will make standard toilets higher. It will evacuate waste well but it is a bit loud! Bottom line is if you can't plumb thru walls or gravity this product will work for you. I wish this could be integrated or an option available for macerating the waste prior to ejecting it. All parts are there, a list of needed plumbing parts are listed. this is heavy but stable/strong.
Was this helpful?
1
0
I have built and rebuilt many bathrooms, there is no easier way to install a bathroom in your bas...
Ease of installation :
5
Quality :
5
Seeds Program Review
(What's this)
I have built and rebuilt many bathrooms, there is no easier way to install a bathroom in your basement. Once the drain hook up is done, water lines readied, this a job you wanna do with your plumber. The rest is easy, you can build your full or half bath in no time. The Everbilt sewage basin system gives you the flexibility of adding a free standing toilet to almost any finished surface in your home, office, warehouse or factory. The automatic vertical float switch activates the monster 1/2 HP sewage pump that is contained in the sealed basin. The 1/2 HP pump removes 6,000 GPH at 10 ft. of lift. The pump is constructed of rugged cast-iron for maximum pump life. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is built with ball bearings to provide quiet operation. The graphite and ceramic mechanical seals provide extended motor life. The unit has a 2 in. NPT discharge with a 10 ft. power cord. 1-year limited warranty is provided. Designed to remove waste water from toilet, non-sewage basin shower, this unit is ideal. We are adding a full bath to a basement and expect the finished product to take two days. Very satisfied.
Was this helpful?
5
0
Work perfect I never thought about it was very necessary and effective. I recomend if you are loo...
Work perfect I never thought about it was very necessary and effective. I recomend if you are looking pump this pump ia the better..
Was this helpful?
0
0
A+++++++++++++++
A+++++++++++++++
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Was this helpful?
0
0
I love it, excellent product I'm so happy, thanks!!...
I love it, excellent product I'm so happy, thanks!!
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers