#1 Home Improvement Retailer

Internet #204620212

Model #C617HD12

Store SKU #187488

1/2 in. Copper Pressure Tube Cap Fitting

83¢
  • Ideal for potable water, air conditioning and refrigeration
  • Designed for use with L and M hard temper copper tubing
  • Fits over the end of the pipe to form a permanent seal
  • View More Details
Store
0 in stock
Text to Me

Frequently Bought Together

Exclusive
+
+
Price:
83¢

Product Overview

The lead-free wrought copper solder pressure tube cap is used in residential and commercial systems such as potable water, air conditioning and refrigeration. The tube cap features a solder cup. The fitting is used to fit over the end of pipe to seal the end. In addition to its inherent qualities of beauty, durability and low maintenance, copper's reusability makes it an ideal application in sustainable projects.
  • 1/2 in. Inside Diameter and 0.625 in. Outside Diameter
  • Copper construction
  • Permanently caps copper tubing
  • Use with types L and M hard-temper copper tubing (not included)
  • Use aboveground for water-supply piping
  • Sweat connections
  • Dezincification resistant
  • Lead free refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25%, source: California Health and Safety Code (116875); Vermont act 193

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Copper Fittings

current product
Exclusive1/2 in. Copper Pressure Tube Cap Fitting
Exclusive1/2 in. Copper Pressure 90-Degree Cup x Cup Elbow FittingExclusive3/4 in. x 3/4 in. Copper Pressure 90-Degree Cup x Cup Elbow Fitting1/2 in. Copper Press x Press Pressure Coupling with Dimple Stop
BrandEverbiltEverbiltEverbiltNIBCO
Name1/2 in. Copper Pressure Tube Cap Fitting1/2 in. Copper Pressure 90-Degree Cup x Cup Elbow Fitting3/4 in. x 3/4 in. Copper Pressure 90-Degree Cup x Cup Elbow Fitting1/2 in. Copper Press x Press Pressure Coupling with Dimple Stop
Price
83¢
85¢
$179
$230
Ratings
(43)
(206)
(206)
(4)
Fitting 1 size1/2"1/2"3/4"1/2"
Fitting or Connector TypeCapElbowElbowCoupling
ConnectivitySolderSolderSolderPress
Pack Size1111
FeaturesCorrosion Resistant,Lead FreeCorrosion Resistant,Lead FreeCorrosion Resistant,Lead FreeCorrosion Resistant,Lead Free
ApplicationAir Conditioning,Potable Water,RefrigerationAir Conditioning,Potable Water,RefrigerationAir Conditioning,Potable Water,RefrigerationAir Conditioning,Potable Water,Refrigeration
View ProductView ProductView ProductView Product

Specifications

Dimensions

Fitting 1 size
1/2"
Product Depth (in.)
0.38
Single Fitting Size
1/2"

Details

Application
Air Conditioning,Potable Water,Refrigeration
Color Family
Copper
Color/Finish
Copper
Compatible Pipe Material
Copper
Connection 1
Copper Sweat
Connectivity
Solder
Copper Fitting Manufacturing Process
Wrought
Features
Corrosion Resistant,Lead Free
Fitting or Connector Type
Cap
Fitting/ Connector Collection
Copper
Material
Copper
Maximum working pressure (psi)
722
Maximum Working Temperature (F)
400
Pack Size
1
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
0.02
Reducing Fitting
No
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
The Manufacturer warrants to the Owner, for a period of 50 years from the date the warranty begins, that its properly installed Product will be free of failure as a result of defects in material or workmanship in manufacturing the Product.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.8
    out of 43 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 43 reviews
If you do much plumbing work at all, sooner or later you need to cap a half inch copper water sup...
If you do much plumbing work at all, sooner or later you need to cap a half inch copper water supply line. If you do you might need this copper cap. It is neat and clean and fits easily on any half inch copper pipe. Just sweat it on the pipe as you would any other copper fitting and you are set to go. You can leave it on permanently or cut it off when you are ready to finish your project.
by
  • Recommended
This a standard 1/2 inch copper pressure cap for use on 1/2 inch type L and M rigid copper plumbi...
This a standard 1/2 inch copper pressure cap for use on 1/2 inch type L and M rigid copper plumbing. Note this is a single cap, not a pack of caps. If you're project requires more caps they offer a value pack that is more economical. Copper seems a bit thin but certainly adequate. Requires brazing with rod and flux to secure to rigid line. Works with refrigeration, air conditioning and copper water lines.
by
  • Recommended
This tube cap fitting is handy to have, especially if you are doing work with 1/2 inch copper pip...
This tube cap fitting is handy to have, especially if you are doing work with 1/2 inch copper pipe and you need to cap the pipe for an anticipated, later date when you might add a fitting or extend the line. In other words, it caps the line off so the rest of the system can be in use until there is a need or chance to do more plumbing with that capped line. It is easy enough to sweat into place. I like Everbilt; I use their fittings because they are quality products. I recommend them for both the homeowner and the professional.
by
  • Recommended
Odd copper tube cap. Odd in that it's lighter than the old ones, and is a not domed. But that wri...
Odd copper tube cap. Odd in that it's lighter than the old ones, and is a not domed. But that written, this cap also has three protrusion on cap inside edge, see pics. For commercial/slamming pipe plumbing the lightness of cap would be a blessing, lees weight when packing bunches. The ID diameter of cap is slightly over 9/16" whcih will work just fine with the OD of K"0.527, L"0.545, M"0.569. For the DIY gent/lass what this means is it will work on your copper pipe.
by
  • Recommended
We use these Everbilt 1/2 in. copper pressure tube cap fittings in both temporary and permanent u...
We use these Everbilt 1/2 in. copper pressure tube cap fittings in both temporary and permanent usage. As I am remodeling my bathroom, I use them temporarily to close off pipe cuts and allow the bath to still be used. Then as the permanent need arises, we use them for pipe terminations, like an old toilet pipe that had to be terminated. These caps clean (use round wire brush) and solder easily. If they don't easily go on, the pipe is either deformed or not deburred correctly. Do use flux on the cap and pipe.
by
  • Recommended
3/4" copper Tube Cap, when you come to the end of the line and need to put a cap on it. once you ...
3/4" copper Tube Cap, when you come to the end of the line and need to put a cap on it. once you weld (sweat) the cap into place the job is done. good to have a small supply of this for when the job calls for it. Ideal for central air conditioner lines or water lines or when you have to cut into and reroute lines and you have a small end to cap. Always some a small supply in store.
by
  • Recommended
by
    Fit perfectly thanks...
    Fit perfectly thanks
    by
      Performed as expected...
      Performed as expected
      by
      • Verified Purchase
      I'm in the process of expanding and remodeling a bathroom in a house I just bought. None of the w...
      I'm in the process of expanding and remodeling a bathroom in a house I just bought. None of the water lines going to the bathroom sink, toilet and shower had shutoffs (stupid if you ask me). So I had to shut off my water at the service inlet, cut my lines and solder these caps on so that I could start demolition. They worked just as I needed them to.
      by
      • Verified Purchase
      • Recommended
      Showing 1-10 of 43 reviews