#1 Home Improvement Retailer

Internet #204284538

Model #807210

Store SKU #326484

Store SO SKU #1001692891

1/4 in. Zinc Flat Washer (100-Pack)

$1170
/box
  • Use with fasteners of the same finish
  • Protects surfaces when tightening bolts and screws
  • Buy by the box to save
Store
0 in stock
Text to Me
caret

Product Details

Flat washers are essential fasteners to keep on hand. They are used with a bolt or screw to evenly spread the load over a wider area. Flat washers also prevent loosening due to vibration, stop the bolt or screw from pulling through, and can act as spacers. Available in a variety of sizes and finishes.

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

38Questions
caret
Q:are these magnetic?
by|Jan 14, 2021
4 Answers
Answer This Question

A:  No. but with a little work with a magnet, they could be given a weak magnetic field.

by|Jul 5, 2021

A:  "Magnetic" means capable of being attracted by or acquiring the properties of a magnet. Therefore these are magnetic.

by|Jul 6, 2021

    A:  Yes they're magnetic (zinc plated steel).

    by|Jul 5, 2021

      A:  The product is not magnetic.

      by|Jul 5, 2021
        caret
        Q:Are these hot-dipped galvanized?
        by|Oct 1, 2020
        2 Answers
        Answer This Question

        A:  To clarify the "supplier quality" response.... NO they are not hot dipped galvanized. Mechanical galvanizing is inferior to HOT dipped (less zinc). To say the reason they are not hot dipped is "b/c they stick together" is nonsense... it b/c its cheaper.

        by|Oct 12, 2021

          A:  The galvanized flat washers are mechanically galvanized as hot-dipped galvanization on washers tends to cause them to stick together.

          by|Oct 2, 2020
            caret
            Q:What is the inside diameter is it true 5/8
            by|Sep 23, 2020
            2 Answers
            Answer This Question

            A:  The actual inner diameter of this flat washer is approximately 0.69".

            by|Dec 6, 2022
              1 found this answer helpful

              A:  Washer holes are usually 1/64" larger than the stated size in order to allow a nominal sized bolt to fit without binding.

              by|Dec 6, 2022
              1 found this answer helpful
              caret
              Q:what is inside diameter of the washer hole ? will a 5/8 shaft fit in it ?
              by|Sep 20, 2020
              2 Answers
              Answer This Question

              A:  Worked great

              by|Jan 29, 2021

              A:  This flat washer is for use with a 5/8 inch bolt or screw.

              by|Sep 21, 2020
                Showing 1-4 of 38
                caret

                Customer Reviews

                4.7 out of 5
                (1,066)
                • 4.7
                  out of 1,066 reviews
                • 93%recommend this product
                Filter by:
                Showing 1-10 of 1,066 reviews
                Worked great
                Used these as shims for holding a fence post next to a house
                by
                • Verified Purchase
                • Recommended
                Everbilt 5/8 in Galvanized washers
                Great for the purpose that I was going to use them for...crafts!
                by
                • Verified Purchase
                • Recommended
                Description on the website is not correct
                Website says washers have outside diameter of 5/8 inch, but the ones I received have OD of 3/4 inch (please see pic).
                by
                  1 found this review helpful
                  Wrong Spec Listed
                  These washers are spec'd as .75" O.D. on the Home Depot website. They are actually 1.0" diameter. I can't use these for their intended purpose.
                  by
                    2 found this review helpful
                    This is the most amazing flat washer ever. Its roundness and flatness has changed my life or the...
                    This is the most amazing flat washer ever. Its roundness and flatness has changed my life or the better. Not only that l, my wife's life has also been positively affected by its superb qualities.
                    by
                    • Verified Purchase
                    • Recommended
                    10 found this review helpful
                    Worked fine on lag bolts for 6x6 pressure treated lumber used to make a guardrail along my driveway.
                    Worked fine on lag bolts for 6x6 pressure treated lumber used to make a guardrail along my driveway.
                    by
                    • Verified Purchase
                    • Recommended
                    Works as intended. Used under nuts for anchor bolts
                    Works as intended. Used under nuts for anchor bolts
                    by
                    • Verified Purchase
                    • Recommended
                    This washer is two inches outside diameter and point eighty four inches or twenty one millimeter ...
                    This washer is two inches outside diameter and point eighty four inches or twenty one millimeter inside. The thickness of the plate is 3 millimeters thick. If you need to stack them you can get 80 millimeter in height or right at three and quarter inch in height. ASC is stamped on the face of the plate on one side of each of the twenty five contained in the brown box they come in. Heavy Duty.
                    by
                    • Recommended
                    2 found this review helpful
                    The 5/8 inch zinc-plated cut washer in the 25 pack is of good quality. It is 1 - 5/8 inches wide ...
                    The 5/8 inch zinc-plated cut washer in the 25 pack is of good quality. It is 1 - 5/8 inches wide with a 5/8 hole. It will work for many applications of wood, plastic and metal. The thickness of the washer is 1/8 inch and can be used in a spacing application if necessary to fill needed room. The quality of the manufacturing process seems adequate and produces and consistent product.
                    by
                    • Recommended
                    Being used for decking or fence building is only one of the multiple uses that these washers are ...
                    Being used for decking or fence building is only one of the multiple uses that these washers are perfect for. The Everbilt ¾ inch Zinc plated cut washer provides a large bearing surface so that when used on softer wood, yellow pine which most of your pressure treated wood is made from, it prevents the fastener from being buried into the wood leaving a week or loose joint. The washer comes in 25 pieces to a box, has a 2” outside with a ¾” inside diameter, is 1/8” thick and is zinc plated making it perfect for outside use. The washer does have some weight and I have used it for other things such as a makeshift plumb bob, weight for a picnic table cloth, replacement calk line hook and a weight for the bottom of my curtains to keep them straight. Good product, recommended.
                    by
                    • Recommended
                    5 found this review helpful
                    Showing 1-10 of 1,066 reviews

                    Frequently Bought Together

                    +
                    +
                    Price:
                    $1170

                    Compare Similar Flat Washers

                    current product
                    1/4 in. Zinc Flat Washer (100-Pack)
                    1/2 in. Zinc Flat Washer (50-Pack)5/16 in. Zinc Flat Washer (100-Pack)1/4 in. Galvanized Flat Washer (100-Pack)
                    BrandEverbiltEverbiltEverbiltEverbilt
                    Name1/4 in. Zinc Flat Washer (100-Pack)1/2 in. Zinc Flat Washer (50-Pack)5/16 in. Zinc Flat Washer (100-Pack)1/4 in. Galvanized Flat Washer (100-Pack)
                    Price
                    $1575
                    /box
                    $1603
                    /box
                    $1980
                    /box
                    $2205
                    /box
                    Ratings
                    (1062)
                    (1062)
                    (1062)
                    (1062)
                    Fits Bolt Size1/4 inch1/4 inch5/16 inch1/4 inch
                    Outside Diameter5/8 in1-1/4 in7/8 in5/8 in
                    MaterialSteelSteelSteelSteel
                    Inside Diameter5/16 in1/2 in3/8 in5/16 in
                    Fastener PlatingZincZincZincGalvanized
                    Package Quantity10050100100
                    Measurement StandardUSSUSSUSSUSS
                    GradeA307A307A307A307
                    THD SO SKU1001692891100109332210010753471001093325
                    View ProductView ProductView ProductView Product