|Assembled Depth (in.)||0.24803149606299213 in||Assembled Height (in.)||3.7401574803149606 in|
|Assembled Width (in.)||0.5511811023622046 in||Hook diameter (in.)||0.25|
|Hook length (in.)||3.75||Hook opening (in.)||0.5|
|Projection (in.)||2.25 in|
|Fastener Type||Other Hook||Finish Family||Metallic|
|Maximum Weight Capacity (lb.)||0||Pack Size||1|
|Package Quantity||1||Product Weight (lb.)||0.06 lb|
A: Everbilt 1/4 in. x 3-3/4 in. L Zinc-Plated Lag Thread Screw Eye has 1/4 in diameter for the threads.
A: Yes, but zinc coating ought to delay the process for a long time. How long? It depends on exposure and wear so I can not say. So I guess: Iimited rust resistance.
A: Everbilt 1/4 in. x 3-3/4 in. L Zinc-Plated Lag Thread Screw Eye will rust with outdoor use. The zinc finish will provide some rust resistance, but stainless steel finish will provide the best rust resistance for outdoor use.
A: I would not use these for a porch swing, 1/4” is too thin for holding a lot of weight, in my opinion. I would use an eyelid with at least a 1/2” diameter and shank 4” long
A: This lag screw can be used for this application, but would require strong enough chain to be used with it. We would recommend using Part# 803074, OMS ID 204765164, Porch Swing Chain kit, which is designed specifically for this purpose.
A: Load rating is 300 lbs (answered in other questions) so that might be right on the edge of what you'd want to use. Probably better to use at least a half inch screw eye.
A: The diameter of the circular portion of the screw eye is about 9/16 inches or 0.56 inches.
A: depends the size of the opening
A: The hook opening is 0.5 inches.