![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Water Source | Woodford | Woodford |
Name | 2 ft. Bury Depth Frost-Proof Yard Hydrant | 5 ft. Bury Depth Frost-Proof Yard Hydrant | 3/4 in. x 3/4 in. NPT x MPT 1 in. Galvanized Steel Pipe x 1 ft. Bury R34 Freezeless Yard Hydrant | 3/4 in. x 3/4 in. NPT x MPT 1 in. Galvanized Steel Pipe x 2 ft. Bury R34 Freezeless Yard Hydrant |
Price | $5261 | $6985 | $8140 | $8955 |
Ratings | (156) | (15) | (8) | (2) |
Connection | FIP x MHT | FIP x MHT | Female Pipe Thread | Female Pipe Thread |
Application | Non-Potable Water | Non-Potable Water | Non-Potable Water | Non-Potable Water |
Maximum Pressure (psi) | 120 | 120 | 125 | 125 |
Compatible Pipe Material | PVC | PVC | Brass | Brass |
Indoor/Outdoor | Outdoor | Outdoor | Outdoor | Outdoor |
Features | Frost Free,Lead Free,Threaded | Frost Free,Lead Free,Threaded | No Additional Special Features | No Additional Special Features |
Material | Cast Iron | Cast Iron | Galvanized Steel | Galvanized Steel |
Maximum Working Temperature (F) | 100 | 100 | 120 | 120 |
Product Height (ft.) | 4.3 | 7.3 | 1 | 2 |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Everbilt | Water Source | Woodford | Woodford |
Name | 2 ft. Bury Depth Frost-Proof Yard Hydrant | 5 ft. Bury Depth Frost-Proof Yard Hydrant | 3/4 in. x 3/4 in. NPT x MPT 1 in. Galvanized Steel Pipe x 1 ft. Bury R34 Freezeless Yard Hydrant | 3/4 in. x 3/4 in. NPT x MPT 1 in. Galvanized Steel Pipe x 2 ft. Bury R34 Freezeless Yard Hydrant |
Price | $5261 | $6985 | $8140 | $8955 |
Ratings | (156) | (15) | (8) | (2) |
Connection | ||||
Application | ||||
Maximum Pressure (psi) | ||||
Compatible Pipe Material | ||||
Indoor/Outdoor | ||||
Features | ||||
Material | ||||
Maximum Working Temperature (F) | ||||
Product Height (ft.) | ||||
View Product | View Product | View Product | View Product |
Yes you can take it apart. These are made so you can replace the seats in them without having to dig them up.
Possible debris that got into the water line line during the installation, an underground leak near or at the connection or possibly a defect in the hydrant itself. A leak may show up as a wet spot forming around the area where the leak is. Also if your water meter is turning while you don’t have any water on anywhere you may have a leak somewhere that may cause low pressure.
China, as most plumbing is.
Either the top seal is too tight or the plunger is binding. Top seal can be loosened by turning the nut surrounding the rod counterclockwise in 1/8 turn increments until it loosens. If water leaks, tighten it back up.
Yes, it is variable. No increments but adjustable flow.
51 inches. 27 inches above ground is recommended and 24 inches below ground.
Thanks for reaching out to the Everbilt Team. You can connect to your municipal water supply. The weep hole will just drain around the bottom of the unit. Please pack stone around the base to allow for good drainage. Depending on your local codes, you may need to add backflow prevention before the yard hydrant. If you have questions please call us at 844-251-7446 to discuss.
3/4 inch npt to whatever size pvc pipe you have. Preferably an L.
China
It comes in one piece ready to install to your water line. You just have to dig the hole and install a 3/4" inch male thread to connect to. If you are installing to PVC, I recommend that you connect the fitting to the Everbilt before gluing it to your water line.