#1 Home Improvement Retailer

Internet #100347144

Model #C603HD34

Store SKU #187380

3/4 in. Copper Pressure Cup x FIP Female Adapter Fitting

$5.76
  • Use underground-rated adapter in residential & commercial systems
  • Ideal for potable water, air conditioning and refrigeration
  • Copper is reusable, a great option for sustainable projects
Store
0 in stock
Text to Me
caret

Product Details

Use this 3/4 in. pressure C x FIPT adapter to adapt solder connections to threaded connections in commercial and residential settings. It is ideal for use with potable water, air conditioning and refrigeration systems. This underground-rated, female-threaded adapter is designed for water-supply piping above ground. Its a maximum working pressure reaches 582 PSI. Constructed from high-quality copper, this pressure adapter resists dezincification to preserve its mechanical strength and is reusable to suit sustainable projects.
  • 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
  • Copper material
  • Used for water supply piping above-ground
  • Adapt to standard male pipe threads with solder connection
  • Maximum 582 PSI - maximum working pressure is the rating of the fitting only, at water temperature range of -20 to 100° F
  • Dezincification resistant
  • Third-party certified to NSF/ANSI 61 and 372
  • Note: Product may vary by store.
  • Return Policy
caret

Specifications

caret

Questions & Answers

6Questions
caret
Q:will this connect to a water heater dielectric nipple?
by|Nov 23, 2022
1 Answer
Answer This Question

A:  Thank you for your inquiry on the Everbilt 3/4 in. Copper Pressure Cup x FIP Female Adapter Fitting. This fitting will solder on to 3/4 in. nominal copper tubing and the threaded end will thread onto 3/4 in. NPT threads. You will need to confirm if the threads you have on the nipple are 3/4 in. Male NPT for this to work. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

by|Nov 28, 2022
    caret
    Q:Do you have this either brass or copper, but with a 3/4 MIP/MNPT end in addition to the 3/4 FIP end? Essentially looking for a 3/4 IP riser for a water heater.
    by|Sep 26, 2021
    1 Answer
    Answer This Question

    A:  Thank you for your inquiry on the Everbilt 3/4 in. Copper Pressure Cup x FIP Female Adapter Fitting. We do offer a 3/4 in. male to solder adapter, Model # CP604HD34, but do not have a male thread by female thread fitting. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

    by|Sep 27, 2021
      caret
      Q:Can the smooth end be used with a push to connect (for example sharkbite) fitting?
      by|Aug 14, 2020
      2 Answers
      Answer This Question

      A:  Thank you for your inquiry on the Everbilt 3/4 in. Copper Pressure Cup x FIP Female Adapter Fitting. We highly recommend you send your question to ask Shark-Bite/Cash-Acme since we do not know anything about Shark-Bite and their minimum insertion depth requirements to achieve a seal. In general (and with our own PUSH product), we would not recommend it, nor would we with our own PUSH fittings. The FTG end length is going to vary by size so we have multiple ways of not knowing how this may or may not work to get a proper seal upon assembly. Additionally, we do not recommend it with our own fittings, because it becomes highly impossible to fit the removal tool onto such a joint, as the threaded end transition tapers into a larger diameter and there isn’t enough straight length of FTG end to snap the remove tool over. It defeats the purpose of a removable joint to insert something that prevents that feature from working. Likewise, we only recommend Press adapters be inserted into a Press Cup fittings for this same reason. Solder-joint FTG adapters on some sizes will not meet minimum insertion depths and fail to make a sufficient seal on crimping. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

      by|Sep 23, 2020
        1 found this answer helpful

        A:  No! Shark bite has a threaded end fitty

        by|May 3, 2021
        caret
        Q:What wrench size fits this adapter?
        by|Jul 26, 2020
        2 Answers
        Answer This Question

        A:  1.5 inch open end crescent

        by|May 3, 2021

        A:  Thank you for your inquiry on the Everbilt 3/4 in. Copper Pressure Cup x FIP Female Adapter Fitting. The flat-to-flat dimension on a 603 3/4 in. adapter is approximately 1.20 in. and would take a 1-1/4 in. open-end wrench, though an adjustable wrench would fit most securely to the hex flats. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

        by|Jun 24, 2022
          1 found this answer helpful
          Showing 1-4 of 6
          caret

          Customer Reviews

          4.5 out of 5
          (95)
          • 4.5
            out of 95 reviews
          • 100%recommend this product
          Filter by:
          Showing 1-10 of 95 reviews
          The best adapter for Rheem water heater
          Good for hot and cold 3/4 copper pipe of Rheem water heater.
          by
            • Recommended
            1 found this review helpful
            Works better than dielectric union.
            Installed 2 on hot water heater. No issues, easy installation.
            by
            • DIY
            • Recommended
            2 found this review helpful
            by
            • Verified Purchase
            Well machined and fit perfectly. Nice finish and soldered as...
            Well machined and fit perfectly. Nice finish and soldered as well as any I have ever used. Only one question; How many old pennies (1982 and older) did it take to smelt into this copper fitting?
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            The female adapter was needed to install my water heater,...
            The female adapter was needed to install my water heater, and I haven’t had a issue since installing it four days ago
            by
            • Verified Purchase
            Great product. Above the rest...
            Great product. Above the rest
            by
            • Verified Purchase
            Showing 1-10 of 95 reviews

            Frequently Bought Together

            Exclusive
            ++
            Price:
            $576

            Compare Similar Copper Fittings

            Exclusive3/4 in. Copper Pressure All Cup Tee Fitting
            current product
            Exclusive3/4 in. Copper Pressure Cup x FIP Female Adapter Fitting
            Top Rated3/4 in. x 1/2 in. Copper Pressure Cup x Female Adapter FittingExclusive2 in. Copper DWV Cup x FIP Female Adapter Fitting
            BrandEverbiltEverbiltEverbilt
            Name3/4 in. Copper Pressure All Cup Tee Fitting3/4 in. Copper Pressure Cup x FIP Female Adapter Fitting3/4 in. x 1/2 in. Copper Pressure Cup x Female Adapter Fitting2 in. Copper DWV Cup x FIP Female Adapter Fitting
            Price
            $522
            $539
            $974
            $2964
            Ratings
            (153)
            (95)
            (164)
            (13)
            Fitting 1 size3/4"3/4"3/4"2"
            Fitting or Connector TypeTeeAdapterAdapterAdapter
            ConnectivitySolderCompressionSolderSolder
            ApplicationAir Conditioning,Potable Water,RefrigerationNon-Potable Water,Potable WaterAir Conditioning,Non-Potable Water,Potable Water,RefrigerationNon-Potable Water,Water Supply
            Pack Size1111
            FeaturesCorrosion Resistant,Lead FreeLead Free,Underground RatedCorrosion Resistant,Lead FreeCorrosion Resistant,Lead Free
            THD SO SKU 1000544116
            View ProductView ProductView ProductView Product