#1 Home Improvement Retailer

Internet #

207176557

Model #

800769

Store SKU #

1002109379

Store SO SKU #

1001855310

3/8 in. Compression x 1/2 in. MIP Brass Adapter Fitting (2-Pack)

Contains 2 units ($7.69 /unit)
$15.37
  • Comes pre-assembled and works with any standard garden hose
  • Captive sleeve puts pressure on tubing for a tighter seal
  • Ideal for gasoline, grease, oil, water, vacuum and air lines
  • View More Details
Store
0 in stock
caret

Product Details

Make outdoor water tasks easier with this lead-free compression adapter. Pre-assembled with a captive sleeve, it ensures even pressure for a tight seal. This adapter is easy to install and is perfect for gasoline, grease, vacuum, oil, water and air lines. Durable brass construction resists corrosion. The adapter works with any standard garden hose. Conforms to NSF 372 lead-free certification.
  • Use with copper, brass, aluminum, thermoplastic and plastic tubing
  • Insert included
  • Lead-free brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe and plumbing fittings and fixtures
  • Not recommended for use with steel tubing
  • For aboveground use only
  • Former watts LFA-124
  • 1/2 in. male pipe thread
  • 3/8 in. I.D.
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

17Questions
caret
Q:I am guessing the compression end won't fit over a 1/2 inch copper pipe! Please advice on the correct size compression that goes over and will fit a 1/2 inch copper pipe. Thanks
by|Jan 24, 2023
1 Answer
Answer This Question

A:  For the Everbilt 1/2 in. OD Compression x 1/2 in. MIP Brass Adapter Fitting, you will use instead a 5/8 in. compression to use with a ½ in. copper pipe.

by|Jan 27, 2023
    caret
    Q:What is the thread count on the male 1/2 inch end. I'm needing this type adapter with a 20 thread count. Hoping to find a 1/2 inch male 20 thread count with a female 3/8 inch compression end. I'd prefer a tapered thread on the male end. Thanks.
    by|Dec 12, 2022
    0 Answer
    Answer This Question
    caret
    Q:How would this work on the side of a five gallon bucket?
    by|Nov 27, 2022
    1 Answer
    Answer This Question

    A:  We are not sure of the exact application, but the MIP could be threaded into a hole cut into the bucket. Teflon tape would help prevent leakage for the Everbilt 1/4 in. OD Compression x 1/4 in. MIP Brass Adapter Fitting.

    by|Nov 30, 2022
      caret
      Q:It doesn't look like the picture is correct. Isn't that a 3/8 MIP adaptor?
      by|Jun 30, 2020
      1 Answer
      Answer This Question

      A:  The picture is of the correct fitting, type MIP x Comp. We will update the website with a picture that shows the Comp vs MIP ratio more clearly. Thank you for your feedback.

      by|Jul 1, 2020
        Showing 1-4 of 17
        caret

        Customer Reviews

        4.7 out of 5
        (576)
        • 4.7
          out of 576 reviews
        • 91% recommend this product
        Filter by:
        Showing 1-10 of 576 reviews
        Perfect for a new faucet install/hookup.
        This little adapter fitting was exactly what I needed to install my new faucets! I had my countertops replaced in the kitchen and bathrooms, installed new faucets and found there was no way to connect the faucet water lines to my supply lines. Stopped in and a very helpful associate pointed me to exactly what I needed. A little teflon tape on the threads and these went in very easily.
        by
        • Verified Purchase
        • Recommended
        Good quality, worked perfect.
        Good quality, worked perfect.
        by
        • Verified Purchase
        • Recommended
        This is the third time I’ve purchased Everbilt 1/4 inch...
        This is the third time I’ve purchased Everbilt 1/4 inch straight or elbow compression fittings. One feature I like is that the collar and compression nut are pre-mounted. I’ve lost too many collars to count. With Everbilt, the collars can’t be lost/misplaced.
        by
        • Verified Purchase
        1 found this review helpful
        I used these adapters to connect my new kitchen faucet's water lines to existing risers on shut o...
        I used these adapters to connect my new kitchen faucet's water lines to existing risers on shut off valves. They worked like a charm.
        by
        • Verified Purchase
        • Recommended
        4 found this review helpful
        Needed it to complete plumbing job worked very well
        Needed it to complete plumbing job worked very well
        by
        • Verified Purchase
        • Recommended
        This got the job done. I was replacing a kitchen faucet at night and during the final steps of i...
        This got the job done. I was replacing a kitchen faucet at night and during the final steps of installation noticed that the connection from my PEX pipe (1/2 in.) didn't fit my new connectors from the faucet (3/8 in.). Feeling frustrated, I headed off to a "blue-colored" competitor. The associate told me exactly what I needed, but they were all out. He was nice enough to pull up a picture of the exact part I needed and send me on my way, as I told him I was headed to his "orange" competitor. Arriving at HD just before closing, I showed the pic to an associate, and he found it right away. Back home, I installed the adapter in seconds to finish the faucet installation. No leaks! I thought the price seemed a little high for 2 adapters, but I'm no plumber, and given my situation, I couldn't be picky.
        by
        • Verified Purchase
        • Recommended
        8 found this review helpful
        by
        • Verified Purchase
        it works great it'sworkgreat !
        Good product I'd like it
        by
        • Verified Purchase
        • Recommended
        Good product
        Worked like a charm!
        by
        • Verified Purchase
        Poor quality - the thread is slightly off which caused a leak. Very frustrating since now I have to take everything apart and start over
        There should be a zero star choice
        by
        • Verified Purchase
        Showing 1-10 of 576 reviews

        Frequently Bought Together

        Exclusive
        +
        +
        Price:
        $1537

        Compare Similar Brass Fittings

        current product
        Exclusive3/8 in. Compression x 1/2 in. MIP Brass Adapter Fitting (2-Pack)
        3/8 in. x 3-1/2 in. Brass MIP Nipple Fitting (5-Pack)1/2 in. x 3/8 in. MIP Brass Pipe Hex Reducing Nipple Fitting (5-Pack)3/8 in. x 4 in. MIP Brass Nipple Fitting (5-Pack)
        BrandEverbiltLTWFITTINGLTWFITTINGLTWFITTING
        Name3/8 in. Compression x 1/2 in. MIP Brass Adapter Fitting (2-Pack)3/8 in. x 3-1/2 in. Brass MIP Nipple Fitting (5-Pack)1/2 in. x 3/8 in. MIP Brass Pipe Hex Reducing Nipple Fitting (5-Pack)3/8 in. x 4 in. MIP Brass Nipple Fitting (5-Pack)
        Price
        $1537
        $1776
        /package
        $1921
        /package
        $2021
        /package
        Ratings
        (576)
        (0)
        (3)
        (0)
        Fitting 1 size3/8"3/8"1/2"3/8"
        Fitting or Connector TypeAdapterNippleNippleNipple
        ConnectivityCompressionThreadedThreadedThreaded
        ApplicationAir,OilAir,Oil,Potable WaterAir,Natural Gas,Non-Potable Water,OilAir,Oil,Potable Water
        FeaturesCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,ThreadedCorrosion Resistant,Lead Free,Threaded
        Pack Size2555
        THD SO SKU1001855310
        View ProductView ProductView ProductView Product