#1 Home Improvement Retailer

Internet #300096777

Model #800149

Store SKU #696243

5/8 in. Barb x 3/4 in. MIP Brass Adapter Fitting

$8.25
  • Use aboveground for water lines to hoses, tanks and more
  • Recommended for use with plastic, vinyl or rubber tubing
  • Pair with a hose clamp for a more secure fit
Store
0 in stock
Text to Me
caret

Product Details

These hose barbs are made of durable, corrosion resistant and lead-free brass while conforming to NSF 61 and 372 and are registered in Mass. They have several barbs to hold when inserted into tubing. Best for use with plastic, vinyl or rubber tubing. Pair with a hose clamp for a more secure fit.
  • 1-piece per package
  • LFA-495
  • Not for underground use
  • Use with soft tubing like vinyl or rubber
  • Hose clamps recommended for secure hold
  • All brass construction
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

DIY Projects & Ideas

caret

Specifications

caret

Questions & Answers

11Questions
caret
Q:Can this fitting be used for potable water? It's says is lead free.
by|Oct 19, 2022
1 Answer
Answer This Question

A:  The Everbilt 1/2 in. Barb x 1/2 in. MIP Brass Adapter Fitting can be used for potable water.

by|Oct 20, 2022
    caret
    Q:Can this fitting be used with pex?
    by|Mar 21, 2022
    1 Answer
    Answer This Question

    A:  For the Everbilt 1/2 in. Barb x 3/8 in. MIP Brass Adapter Fitting, the barb is designed to fit pipes with an inner diameter of ½”. It does not have the same barbing as pex fittings and may not hold as much pressure as a pex specific barb fitting.

    by|Apr 9, 2022
      1 found this answer helpful
      caret
      Q:Will this work on a spa pump?
      by|Nov 27, 2021
      1 Answer
      Answer This Question

      A:  The Everbilt 3/8 in. Barb x 1/4 in. MIP Brass Adapter Fitting can be used in spa systems. Please verify with pump manufacturer that the fitting will not be subject to temperatures over 250 Fahrenheit and pressures over 150 PSI.

      by|Nov 30, 2021
        caret
        Q:Is this safe for potable drinking water?
        by|Jul 31, 2021
        1 Answer
        Answer This Question

        A:  This 1/4 in. Barb x 1/4 in. MIP Brass Adapter Fitting is NSF 61 and 372 certified for use with potable water.

        by|Aug 2, 2021
          Showing 1-4 of 11
          caret

          Customer Reviews

          4.7 out of 5
          (186)
          • 4.7
            out of 186 reviews
          • 97%recommend this product
          Filter by:
          Showing 1-10 of 186 reviews
          I needed to connect a Pur water filter from my main line under the sink to their provided hose. ...
          I needed to connect a Pur water filter from my main line under the sink to their provided hose. The filter came with an adapter, but it was set up for 1/2 inch to 1/2 inch with the barb coming out and I needed 1/2 inch to 3/8. I had to piece together my set up and this was one of the pieces I used. I applied teflon tape to the threads for a more sure fit and was able to slide the tube down to the 4th barb. It has been installed for a couple of weeks and there hasn't been a single issue. I don't forsee any either. On a side note, the plumbing specialist at my home depot helped me pick out the pieces I would need and even opened up the packages to check the fit in store. The main thing we were both worried about was the seating of the seals, but he went above and beyond to make sure that everything would fit before I ever left the store.
          by
          • DIY
          • Recommended
          I used this for the argon line for my lincoln 210 MP.it works great.
          I used this for the argon line for my lincoln 210 MP.it works great.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          After having completely replacing my HVAC system, I wanted to future-proof it and be AC ready. He...
          After having completely replacing my HVAC system, I wanted to future-proof it and be AC ready. Here in Seattle, most homes do not have air conditioning as our summers are mild. However, summers are continuing to warm. Therefore, as I was replacing the mechanical components (including the supply plenum, return mixing box, and the furnace, air handler and filters), I installed the brass hose barb fitting and a pass through for a chiller line set. Under my water heater which is besides this area, I have a 3/4" copper pipe that runs outdoors for water heater overflows. I added a tee which I connected to this fitting. That way, if I ever put in a coil, the condensate hose could run a mere 2-3' to this fitting and have the water run out of the house (furnaces and water heaters are often installed in garages here in Seattle as there is usually no basements - thus no drains). I placed a red cap over the end and stainless hose clamp on the fitting until I attach a hose in the future.
          by
          • DIY
          • Verified Purchase
          • Recommended
          Use this for a hefty tether point. This is ideal for anchoring a big rope or steep cable to somet...
          Use this for a hefty tether point. This is ideal for anchoring a big rope or steep cable to something. I use these on my dock and also for attaching cables to posts etc. Essentially anything that can have a ½” hole drilled in them and a few inches thick. It comes with a matching nut, but you will likely alss need to buy a suitable washer if anchoring this through wood. The thread turns a little rough, but it is not a problem at all. The threaded part is 2-¾” long. Overall length is 8 inches. Rated for 300 lbs. Made in China.
          by
          • Recommended
          3 found this review helpful
          This everbilt hose barb fitting was exactly what I was looking for. I'm adding some hose to my ai...
          This everbilt hose barb fitting was exactly what I was looking for. I'm adding some hose to my air system in my garage and this is the exact fitting that I needed. I've used this brand before I have been nothing but satisfied and happy with the quality of Peace. Anyone looking to do some adapter modifications to the airline system I would highly recommend this peace to you.
          by
          • Recommended
          by
          • Verified Purchase
          by
          • Verified Purchase
          Good Adapter
          Just what I needed to connect the 3/8 inch fuel line to the fuel tank
          by
          • Verified Purchase
          • Recommended
          Rating provided by a verified purchaser...
          Rating provided by a verified purchaser
          by
          • Verified Purchase
          by
          • Verified Purchase
          Showing 1-10 of 186 reviews

          Frequently Bought Together

          Exclusive
          ++
          Price:
          $825

          Compare Similar Brass Fittings

          current product
          Exclusive5/8 in. Barb x 3/4 in. MIP Brass Adapter Fitting
          Exclusive3/4 in. FHT x 3/4 in. FIP Brass Adapter FittingExclusive5/8 in. OD Compression x 1/2 in. MIP Brass Adapter FittingExclusive3/8 in. OD Compression x 3/4 in. MIP Brass Adapter Fitting
          BrandEverbiltEverbiltEverbiltEverbilt
          Name5/8 in. Barb x 3/4 in. MIP Brass Adapter Fitting3/4 in. FHT x 3/4 in. FIP Brass Adapter Fitting5/8 in. OD Compression x 1/2 in. MIP Brass Adapter Fitting3/8 in. OD Compression x 3/4 in. MIP Brass Adapter Fitting
          Price
          $825
          $825
          $845
          $1317
          Ratings
          (186)
          (168)
          (525)
          (525)
          Fitting 1 size5/8"3/4"5/8"3/8"
          Fitting or Connector TypeAdapterAdapterAdapterAdapter
          ConnectivityBarbThreadedCompressionCompression
          ApplicationAir,OilAir,OilAir,OilAir,Oil
          FeaturesCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,Lead Free,ThreadedCorrosion Resistant,Lead Free,Threaded
          Pack Size1111
          THD SO SKU 1002045856
          View ProductView ProductView ProductView Product