WM129 7/16 in. x 11/16 in. Medium Density Fiberboard (MDF) Shoe Molding
- No painting required. All the style with none of the hassle.
- Cut, Install, Caulk. Install Finished Elegance in 3 easy steps.
- Durable and flawless finish for your interior space. Made in USA.
- View More Details
Ask about this product
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
Finished Elegance is an innovative pre-finished moulding line that not only has a flawlessly beautiful, durable finish, but also saves you time and money by eliminating the hassle of needing to paint. Simply cut, install, and caulk. No need to buy paint and painting supplies or spend time painting your moulding. Also, its proprietary coating and MDF construction combine to give your perfect cuts line up every time for less issues and a clean look. Not only is Finished Elegance easy to use and stunning to see, but it also stands up to even the harshest wear and tear. Finished Elegance offers superior resistance to scratching, marring, dents, moisture, and splitting. Finished Elegance is a practical solution to achieve a durable, flawless finish for your interior space.
Highlights
- Smooth, consistent surface is factory finished for easy installation
- Simply nail to the wall and fill the holes for a perfect installation
- Durable finish is resistant to scratches and dents
- Fill drill holes with color matched caulk for the perfect look.
- Classic, small-profile moulding is useful in covering small gaps
- Can be used to accent traditional base mouldings
- Installs with common woodworking tools
- For interior use only
- NOT recommended for bathrooms or high moisture environments
- Note: product may vary by store
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions
Product Depth (in.) | 0.438 in |
|---|---|
Product Length (in.) | 12 in |
Product Width (in.) | 0.688 in |
Details
Color Family | White |
|---|---|
Color/Finish | White |
Decorative Moulding Type | Standard Profile |
Durability | Not Applicable |
Finish Type | Finished |
Installation Type | Nail |
Interior/Exterior | Interior |
Material | Medium Density Fiberboard (MDF) |
Moulding Cut | By Linear Foot |
Moulding Features | No Additional Features |
Moulding Type | Shoe Moulding |
Moulding Use | Floor |
Pack Size | 1 |
Pattern Number | 0000 |
Warranty / Certifications
Manufacturer Warranty | None |
|---|
Questions & Answers
In the specifications, why does length show 12 in. (inches)? I assume the web page is incorrect and the length is actually 12 ft (feet). Please clarify the length.
Can CA glue be used on joints such as glueing two 8-foot sections for a more secure joint?
how is it put with glue?
You can use a number of construction adhesives and a caulking gun. A small bead of adhesive on one edge of the molding and put in place. Wipe off any excess immediatley.
can it be used in bathroom?
Yes, used in mine.
No, it is not recommended to be used in a bathroom.
Absolutely, why not?
Can this molding be painted? And would it need to be primed or sand papered for paint to adhere? Thank you
From the guide: If you do paint Finished Elegance, remember the paint can only dry from the outside in due to the coating. Therefore the dry time is significantly longer. Full cure could take as long as 30 days. I'm not risking it. I'll leave it white.
Yes, it can be painted, although the white color looks really clean. One caution is too keep it from getting wet. As it is fiberboard, it will swell and separate.
yes
It seems to be wrapped in a white glossy finish....you definitely need to paint the cut ends & I would think it would need 2+ coats if you wanted to paint the length of the moulding.
Painted it, did not use sandpaper
Yes, which you'll need to do to conceal cuts and finish nails.
Yes, this model can be painted.
Did not sand paper before painting
Is this OK to be installed in a bathroom, was unable to find a nice PVC version of this. I like the look, concerned with the humidity and MDF material.
Yes...you can install this in a bathroom. If installed properly, you should not experience any difficulties with this moulding. Also, because the humidity in a bathroom is usually (but not always) a short term, temporary condition, the impact on the moulding should be minimal.
Yes you can but use a semi gloss paint or a kitchen and bath paint designed for humidity,
Temporary humidity shouldn't be a problem if the bathroom is ventilated. However, standing water would be an issue. I hope this helps!
I sealed it with kitchen and bathroom caulk and it’s held up pretty well so far. I put it in about 2 years ago. We’ve got some in the kitchen too near a dog water dish, so that gets wet pretty often and again, no problems. The finish holds up on its own, but I would say sealing the joints is the only way to make it last.
What does MDF mean?
MDF = Medium Density Fiberboard
Medium density fiber board
Medium density fiber board....from what I've seen on YouTube it is a product comparable to plywood strength.
Can I pick a color? The color I am looking for is gray.
Primed white and you paint it gray
This is only available with a white finish. There is this moulding available either raw or primed so you can finish it with the color desired.
Viewing 1-8 of 14
Customer Reviews
4.7 out of 5
Loading Recommendations
Related Products
WM 127 3/4 in. x 7/16 in. x 192 in. EcoPoly Interior Polystyrene Shoe Moulding
The TRIMFINITY 7/16 in. x 3/4 in. Polystyrene 127 Base Shoe makes a great transition between base molding and flooring. Polystyrene 127 Base Shoe can also be used to cover gaps where flooring surfaces meet base molding. Base Shoe is also used to cover small alignment challenges where hard surface flooring meets the wall.
3/4 X3/4 TIMB WM105 QTR RND
Featuring a sleek white finished surface, composite moulding is a great way to update your rooms and highlight the special care that has gone into your property. Moulding can increase the value of your home or business estate and are an inexpensive way to add character and flair to any home. Quarter round works great to conceal the gap between the base and the floor.
LWM620 - 15/32 in. D x 4-1/4 in. W Primed Medium Density Fiberboard (MDF) Baseboard Molding
Woodgrain brings a trusted legacy of durability, design integrity, and value-so you can count on consistent quality and a refined appearance in your home. Whether you're outfitting a new home or refreshing a remodel, this moulding delivers strong performance, clean lines, and the trusted Woodgrain standard. Blending heritage craftsmanship with forward-thinking design, Woodgrain lets you go beyond ordinary trim work-transforming every detail into a statement of style, quality, and natural elegance.Woodgrain baseboards bring a refined, finished look to any room by blending timeless durability, craftsmanship, and style. Crafted to bring a polished finishing touch to your space, LWM620 baseboard adds both character and timeless detail. Designed to complement a wide range of interior designs, these baseboards create a clean visual transition between walls and flooring. Crafted from high-quality MDF for a smooth, consistent surface that delivers a perfectly straight trim, Woodgrain MDF baseboards elevate everyday spaces with a touch of sophistication. Whether you're updating a single room or completing a whole-home renovation, Woodgrain baseboards provide the perfect foundation for a polished, cohesive design.
11/16 in. x 11/16 in. MDF Pre-Finished White Quarter Round Molding
This quarter round is pre-finished. The coating is resistant to scratches, scuffs and damage. Pre-finished in an elegant white and ready to install. It is designed for interior use for wide-ranging compatibility and is designed for time- and labor-saving convenience.
